DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W
| Quantity | |
|---|---|
Features
- 1-15P plug for 120 VAC input
- 5.5mm barrel connector for 24 VDC output
- Class II
- UL Listed
Overview
- Class II power supply
- UL listed
- 2-Pin plug for 120 VAC input
- 5.5mm Barrel for 24 VDC output
- 4' wire length
- 3-Year warranty
CPS wall mounted Specification Sheet 
Specifications
| Ambient Operating Temperature Range | 0~+40 °C (32~+104 °F) |
|---|---|
| Brand | DiodeDrive |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies. |
FCC, UL Listed |
| Dimmable | No |
|
Dimming Control
Dimming Control
TRIAC Dimming: This is the most commonly recognized dimming type, with TRIAC Dimmers found in most Home Centers and hardware stores. TRIAC (TRIode for Alternating Current) dimmers operate by modifying the voltage waveform, reducing the amount of power input to the device being controlled. Reducing the input power will result in a corresponding reduction in a power supply's output voltage/current or a decrease in the lumen output of a light fixture. TRIAC dimmers come in two variations: Forward Phase and Reverse Phase
0-10V Dimming: This type of dimming control is most commonly found in commercial applications. It works by varying a voltage from 0 to 10 VDC on dedicated dimming wires. The output of a power supply or light fixture is proportional to the voltage applied. Pulse-Width Modulation (PWM) Dimming: This dimming control adjusts output by rapidly turning the output on and off at a fixed frequency. The proportion of on-time to total time sets the dimming percentage. Potentiometer Dimming: Potentiometer dimming varies the output using a variable resistor, or potentiometer, to set the dimming level. |
Non-Dimmable |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Input Frequency Range | 50 - 60 Hz |
| Input Connection Type | 1-15P Plug |
| Input Voltage | 120 VAC |
|
IP Rating
IP Rating
|
IP20 |
| Output Connection Type | 5.5 mm x 2.1 mm DC Barrel |
| Output Voltage | 24 VDC |
| Warranty | 3 Year |
| Wire Gauge | 16 AWG |
| Part NO | Output Current |
Output Power
Output Power
A power supply's power consumption is measured in watts and refers to the maximum amount of power it is capable of delivering. For best results, choose a power supply that offers a minimum of 20% wattage overhead for your application. Wattage overhead ensures that your project will function correctly, extends the life of the power supply, and offers greater design flexibility by allowing for project expansion. |
|---|---|---|
| CPS-24V-12W | 500 mA | 12 Watts |
| CPS-24V-12W(White) | 500 mA | 12 Watts |
| CPS-24V-18W | 750 mA | 18 Watts |
| CPS-24V-18W(White) | 750 mA | 18 Watts |
| CPS-24V-24W | 1000 mA | 24 Watts |
| CPS-24V-24W(White) | 1000 mA | 24 Watts |
| CPS-24V-36W | 1500 mA | 36 Watts |
| CPS-24V-36W(White) | 1500 mA | 36 Watts |
| CPS-24V-48W | 2000 mA | 48 Watts |
| CPS-24V-48W(White) | 2000 mA | 48 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
