Name: 5m RGB+W LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP67 Weatherproof
Brand: Super Bright LEDs
SKU: DC-IP67-RGB+W-5m
Price: 129.99 USD
Availability: InStock
Rating: 4.3 (8 reviews)

Overview

This flexible LED strip light uses alternating color-changing and true white LEDs to produce bold, brilliant illumination in a wide range of high-quality color tones. It has an IP67 weatherproof rating, fit for use outdoors. Peel-and-stick 3M™ adhesive backing enables fast, easy mounting. Backed by a lifetime warranty.

Product Details:

Maximum run: 12V is 5m and 24V is 7.5m
18 LEDs/ft
Strip width measures 12mm
3M™ adhesive backing for surface mounting
Weatherproof input connector
0-100% dimmable
Lifetime exceeds 50000 hours
CE certified and UL Listed
Lifetime warranty

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Architectural Features and Facades
Landscaping
Outdoor Signs and Advertisements
Patios, Decks, and Pools
Task Lighting
Dock Lighting

LED Strip Lights FAQs

What is the difference between 12V and 24V strip lights?

Most LED strips are extremely similar despite differences in voltage. They look the same and are capable of similar light output. Despite this, there are some key differences between voltages which affect use for various applications. 12-volt DC strips can be connected directly to a vehicle's 12-volt DC electrical system. Higher voltage strips (e.g. 24 VDC, 36 VDC, or 48 VDC) on the other hand allow for longer runs and higher densities of LEDs over their 12-volt counterparts. 120 VAC strips offer incredibly long max runs and the ability to power from a standard wall outlet. For the maximum run of a strip see max run in the specification table. Read More »

How long of a run can I make my strip?

The max run of an LED strip is dependent on two primary things—voltage and density.

Higher voltage strips will generally give you a longer run than comparable lower voltage strips (e.g. 24 VDC would have a longer max run than 12 VDC with the same type of strip and density). Similarly, lower density strips have the potential for longer runs than high density strips.

So essentially, max run can be lengthened by choosing a higher voltage and/or lower density version of a strip, but a higher voltage could also provide a similar max run at an increased density where brightness or 'line of light' are more of a concern. If an install needs to extend beyond a strips max run, additional power feeds can also be run back to the power supply from other points in the run.

Please refer to the max run spec listed in the specification table of each product information page for specific information about each strip. Read More »

What is color temperature? Which one is best?

Graphic showing light output color temperature range

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Read More About: Lumens vs CCT vs CRI »

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Read More About: Lumens vs CCT vs CRI »

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

12 Volt Power Supplies

24 Volt Power Supplies

Strip Connectors

Controllers

Housings

Installation Supplies

LED Strip Light Power Supply Calculator

Calculate the minimum power supply capacity needed for your installation. Minimum wattage is calculated as estimated wattage / 0.80 to give you the 20% wattage overhead necessary to improve power supply longevity.

Outdoor?

Yes No

Length (in feet) Voltage Wattage (per foot)

Calculate

Minimum Power Supply Wattage:
xx watts.

Shop Indoor Power Supplies

We've pre-filtered compatible power supplies for you based on voltage and weatherproofing requirements. Double check your wattage selection based on the calculation above before adding to cart. Many of our power supplies are offered in multiple wattages.

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
Certifications/Compliance	CE, UL Listed
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Suitable for Wet Locations, Waterproof
Finish	White
IP Rating	IP67
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	18 LEDs/ft
LED Type	5050 SMD
Length	16.4ft (5m)
Rated Life (L70)	50000 Hours
Series	DynamicColor
Strip Width	14mm (0.55in)

Print Specifications

Part NO	Brightness	CCT Value CCT Value	Color Temperature Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	CRI	Current Draw Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	Current Draw per Foot Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	Efficacy	LEDs per Segment	Max Run (Class 2) Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Minimum Cut Length	Operating Voltage	Power Consumption	Wattage per Foot	Wire Length
STW-E30K80-A10F-12B5M-24V	204 lm/ft (670 lm/m)	3000K	RGB+Warm White	80+	2.67A (2670mA)	163mA	52 lm/W	10	Up to 21.3ft (6.5m)	167mm (6.6in)	24 VDC	64 Watts	3.9 W/ft (12.8 W/m)	508mm (20in)
STW-E30K80-A6F-12B5M-12V		3000K	RGB+Warm White		4.75A (4750mA)	290mA			Up to 16.4ft (5m)	100mm (3.9in)	12 VDC	57 Watts	3.5 W/ft (11.4 W/m)
STW-E40K80-A10F-12B5M-24V	204 lm/ft (670 lm/m)	4000K	RGB+Natural White	80+	2.67A (2670mA)	163mA	52 lm/W	10	Up to 21.3ft (6.5m)	167mm (6.6in)	24 VDC	64 Watts	3.9 W/ft (12.8 W/m)	508mm (20in)
STW-E40K80-A6F-12B5M-12V		4000K	RGB+Natural White		4.75A (4750mA)	290mA			Up to 16.4ft (5m)	100mm (3.9in)	12 VDC	57 Watts	3.5 W/ft (11.4 W/m)
STW-E50K80-A10F-12B5M-24V	204 lm/ft (670 lm/m)	5000K	RGB+Cool White	80+	2.67A (2670mA)	163mA	52 lm/W	10	Up to 21.3ft (6.5m)	167mm (6.6in)	24 VDC	64 Watts	3.9 W/ft (12.8 W/m)	508mm (20in)
STW-E50K80-A6F-12B5M-12V		5000K	RGB+Cool White		4.75A (4750mA)	290mA			Up to 16.4ft (5m)	100mm (3.9in)	12 VDC	57 Watts	3.5 W/ft (11.4 W/m)

Accessories & Power Supplies

All Accessories

12V Power Supplies

Controllers

Installation Supplies

Channels

24V Power Supplies

Remotes

Connectors

Accessories Links

Accessory Category

Accessory Type:

$0.99 per Foot

22 Gauge Wire - Five Conductor RGB+W Power Wire - RGB+W Wire Part Number: RGBW-5Wire
In stock

RGBW-5Wire peel-able 22 gauge 5 conductor power power wire. Useful for lengthening segments of RGBW LED strips and RGBW controllers. Price per foot.
$0.99 per Pack

14mm Silicone Mounting Clip and Screws for STW Series Waterproof Strip Lights - 10 Pack - STW12-CLIP Part Number: STW12-CLIP
In stock

Silicone mounting clips are compatible with STW series LED strip lights. Safely attach the strips to flat surface with included screws for consistent and sturdy illumination.
$0.49 ea.

14mm Silicone Wiring End Cap for STW Series Single Color Waterproof Strip Lights - STW12-EC2H Part Number: STW12-EC2H
In stock

Silicone Wiring End Cap is designed to provide a waterproof seal for LED Strip Lights measuring 14mm in width.
$0.99 per Foot

PVC Jacketed 18 Gauge Wire - Five Conductor Power Wire - 18 AWG - 5 Wire Part Number: WP18-5CMR
In stock

This 5-conductor, 18-gauge power wire is designed for low-voltage RGBW LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.

$16.99 ea.

GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
In stock

The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
$61.99 ea.

GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: C0758
In stock

The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for "line of light" illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach an IP67 rating when sealed with optional accessories. Available in 3.3ft (1m) or 6.6ft (2m) lengths, white or silver anodized.

$22.99 ea.

RGB/RGBW LED RF Remote - Wireless - 10 Dynamic Modes - DS-RGBW Part Number: DS-RGBW
In stock

DS series RF Remote pairs with a compatible receiver to control RGB/RGBW LEDs.

$5.99 ea.

RGBW and RGB+W Jumper Cable - 50mm - Male to Male Connector - STW Series Compatible - Waterproof - STW-5FF-5 Part Number: STW-5FF-5
In stock

This 5-pin jumper cable is designed to connect or extend STW series RGBW and RGB+W LED strip lights. Rated IP67, it is entirely waterproof and can be used outdoors. Male to male connector. Cable measures 50mm.
$4.99 ea.

RGBW and RGB+W Cable to Cable Connector - 0.5m - Male Connector - STW Series Compatible - Waterproof - STW-5FPT-50 Part Number: STW-5FPT-50
In stock

Pigtail and water resistant male end connector for all RGBW and RGB+W LED strip lights with in the STW series.
$3.99 ea.

RGBW and RGB+W Connector Seal Cap - Male Connector End Cap - STW Series Compatible - Waterproof - STW-5MCAP Part Number: STW-5MCAP
In stock

Solderless and water resistant male end connector for all RGBW and RGB+W LED strip lights with in the STW series.
$6.99 ea.

RGBW and RGB+W Jumper Cable - 0.5m - Male to Female Connector - STW Series Compatible - Waterproof - STW-5MF-50 Part Number: STW-5MF-50
In stock

This 5-pin jumper cable is designed to connect or extend STW series RGBW and RGB+W LED strip lights. Rated IP67, it is entirely waterproof and can be used outdoors. Male to female connector. Cable measures 0.5m.
$5.99 ea.

RGBW and RGB+W Jumper Cable - 50mm - Female to Female Connector - STW Series Compatible - Waterproof - STW-5MM-5 Part Number: STW-5MM-5
In stock

This 5-pin jumper cable is designed to connect or extend STW series RGBW and RGB+W LED strip lights. Rated IP67, it is entirely waterproof and can be used outdoors. Female to female connector. Cable measures 50mm.
$4.99 ea.

RGBW and RGB+W Cable to Cable Connector - 0.5m - Female Connector - STW Series Compatible - Waterproof - STW-5MPT-50 Part Number: STW-5MPT-50
In stock

Pigtail and water resistant female end connector for all RGB and RGB+W LED strip lights with in the STW series. Cable measures 0.5m.

Reviews

85%

4.3 / 5 stars

8 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m RGB+W LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP67 Weatherproof

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

5m RGB+W LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP67 Weatherproof

Features

Product Photos