Optronics LED Trailer Tail Light with Flange - Stop / Turn / Tail - Submersible - 10 LEDs - Round - Red
Part Number
STL42RBP
Overview
The round 4" red Optronics LED Trailer tail light can be used as a stop, turn, and tail light. Constructed of a durable polycarbonate lens and housing. Equipped with 10 LEDs. Connect using a PL-3 connection.
Product Details:
- Slim and durable polycarbonate housing and lens
- Flange mount
- 12 VDC
- Lifetime Warranty
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Turn Lights
- Side Marker Lights
- Tail Lights
- Reverse Lights
- Brake Lights
- Emergency Vehicle Lighting
- Semi-Truck Light
- Trailer Lights
- RV Lights
Specifications
Accessories & Power Supplies
Accessories Links
Accessory Category-
$4.49 ea.Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PBIn stockTo connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.
-
$3.99 ea.3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A45PBIn stock
To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" straight pigtail wire leads with stripped ends.
-
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each. -
$0.49 per FootPVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3In stockThis 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack. -
$0.23 ea.16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164In stockUse this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.08 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
$1.99 ea.Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1In stockHigh performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet. -
$0.09 ea.16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164In stockUse this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors. -
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide. -
View all
All Accessories1 additional compatible accessories
-
$4.49 ea.Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PBIn stock
To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.
-
$3.99 ea.3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A45PBIn stock
To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" straight pigtail wire leads with stripped ends.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack. -
$0.09 ea.16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164In stockUse this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
-
$0.09 ea.16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164In stockUse this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.23 ea.16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164In stockUse this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.08 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
$1.99 ea.Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1In stockHigh performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
-
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
-
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
-
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$0.49 per FootPVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3In stockThis 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.
Reviews
0 / 5 stars
0 reviews
0 / 5 stars
0 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs