store image

Round LED Truck and Trailer Lights with Grommet - 3/4” PC Rated LED Side Clearance Light - Bullet Connector - Flush Mount - 3 LEDs

Part Number: RMPC-x-LP
10 photos
Select LED Color:
Colors
Red
Amber
Discontinued
In Stock
$4.95 ea.
Volume price as low as $4.45
Orders Ship Today!  4 Hours and 44 Minutes remaining
Notes
  • Select options to see various notes.
Share: 

Overview

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.

Warranties & Certifications
Lifetime
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
DOT
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
SAE
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Specifications

Swipe left to see additional specifications
Image (On)Part NOCCT / Wavelength
IntensitySubmersiblePrice Ea.
RMPC-A-LP---$4.95
RMPC-R-LP---$4.95
RMPC-x-LP - Round LED Truck and Trailer Lights with Grommet - 3/4” PC Rated LED Side Clearance Light - Bullet Connecto
Round LED Truck and Trailer Lights with Grommet - 3/4” PC Rated LED Side Clearance Light - Bullet Connector - Flush Mount - 3 LEDs

Accessories

Reviews

Overall Rating

Total Reviews

37

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Name
Kevin
Technical Level
Advanced
Part Number
RMPC-A-LP
Reviewed On
02/05/15

Bright and compact

They're bright, compact, and will make perfect turn signals for my Jeep project. They are bright from the side and the front, so you get a nice option of angles from where to mount and where people can see them from. I feel like these are brighter and better than the RMPC-A (non LP) version, which I also ordered.

One IMPORTANT note - both of the ones I received had the wiring backwards from everything else I've ever seen. Typically black denotes ground, and any other color would be the positive. I originally set it up that way, but it didn't work. After swapping, with the white to ground and the black to positive, they worked fine. I ordered two of these and 2 of the RMPC-A (non LP) and all 4 were wired the same.

Helpful? Yes (31) No (4)

Name
John
Technical Level
Average
Part Number
RMPC-A-LP
Reviewed On
08/07/15

Perfect marker lights for my kayak trailer

These little lights fit perfectly in 1/2 schedule 40 t-connectors, making it very easy to add some elevated marker lights to my kayak trailer. I used both the red and amber so I'd have front and rear markers.

I'd noticed in the other reviews some comments about the polarity. Every trailer (all boat trailers) I've ever owned, the wiring is white for ground, brown for tail/marker lights, and then yellow and green for left and right brake lights / turn signals. I expected the white wire to be ground based on this, so connected the white to the trailer and tied the black into the existing brown wires and everything worked as expected.

Helpful? Yes (12) No (0)

Name
Jerry
Technical Level
Advanced
Part Number
RMPC-A-LP
Reviewed On
07/27/15

Great tip on the wiring, Kevin

The polarity was reversed on my LED lights, too, although it was correct on the two other LED license plate lights I ordered at the same time. Fortunately, I read Kevin's review about the reversed polarity on the RMPC-A-LP lights and tested mine before I installed them.

An easy way to determine polarity is to use a 9V battery; if the light works when the black wire goes to the (+) terminal and the white wire goes to the (-) terminal, the polarity is reversed. Most LED lights are polarity-sensitive while incandescent bulbs are not.

Other than that, both the other reviews are right on. I'm happy with my RMPC-A-LP lights, and the license plate LED lights, too.

Helpful? Yes (7) No (2)

Name
steve
Technical Level
Average
Part Number
RMPC-A-LP
Reviewed On
08/14/15

they are bright !!

I put these in my grill & side fenders on a 2011 jeep wrangler sport unlimited.
Really made the look cool!! They are some bright light's , do not look directly at them unless you want to go BLIND !!!!
I will be buying some more soon .
Plan on do ground affects later.

Helpful? Yes (3) No (0)

Name
Anonymous
Technical Level
Average
Part Number
RMPC-A-LP
Reviewed On
09/02/15

Excellent for motorcycles!

I am using two of these units on the mud flap of my '93 Kawasaki Voyager XII. I needed more lighting for visibility for behind me. this light is very bright and it barely increases power usage (based upon the meter on my motorcycle). I'm very satisfied with the product. Easy to install and the grommet system integral on the light is helpful when mounting. Totally enclosed and waterproof. Well made. You can see them in the included picture (if it uploads correctly). Look at the mudflap you will see 4 LED lights. The Mini-Round lights are the two on the top row of the mud flap.

Helpful? Yes (3) No (0)


Send us your Feedback