LED Lighting for Everything
Shop Clearance - Up to 60% Off Lighting Guides Gift Ideas
Car Light Bulbs
LED Strip Lights & LED Bars
LED Home Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Auxiliary Work Lights
Commercial Truck LED Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
RV LED Lights
Boat LED Lights
LED Flashlights & Flashlight Bulbs
Off-Grid LED Lighting
Industrial LED Lighting
Commercial LED Lighting
Hotel & Casino Lighting
Narrow Rigid Light Bar w/1-Chip LEDs
- Select options to see various notes.
|50 - 99 pieces||$7.15 each|
|100 - 499 pieces||$6.36 each|
|500 - 999 pieces||$5.96 each|
|1000 + pieces||$5.57 each|
|For discount information or inquiring about larger quantity pricing, click here|
- Non-Weatherproof, Indoor use only unless contained within weatherproof housing or used in conjunction with weatherproofing products
RLBN-x30SMD series narrow rigid light bars with 1-chip 3528SMD LEDs. 19.5 inch long non-weatherproof light bars. Can be cut into 3-LED segments. Use C21 Interconnect and Power Jumpers. 12VDC operation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Narrow Rigid Light Bar with
- Showcase lighting
- Cove LED lighting
- Bookshelf LED lighting
- Cabinet LED lighting
- Under cabinet lighting
- Off grid lighting
- Trade show lighting
|Beam Angle||120 degree|
|Connection Type||RLBN Female|
|LED Lifetime||30000 Hours|
|Number of LEDs in Unit||30 LEDs|
|LED Type||3528 SMD|
|LEDs per Segment||3|
|Length (in)||19.7in (1.64ft)|
|Price Per Foot||6.07|
|Standards And Certifications||ISA Approved/RoHS Compliant/UL Listed|
|Strip Width||8.05mm (0.32in)|
|Suitable for Vehicles||Yes|
|Type||End to End Connection/Printed Circuit Board/Rigid Light Bars|
|UL File Number||E357850|
|Operating Voltage Range||12 VDC|
Dimensions: 19.92" (51cm) x 0.44" (1cm) x 0.44" (1cm)
All specifications are subject to change without notice.
2. Max Run (or maximum run) is used to specify the total number of strips that can run in series without experiencing dimming due to voltage drop. When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|Part NO||Total Length||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw @ Operating Voltage |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Power Consumption||CRI ||Price|
|RLBN-CW30SMD||19.7in (1.64ft)||Cool 12500K||12500 K||124 lm/ft||204 lm||-||-||180 mA||2.2 W||-||$7.95|
|RLBN-NW30SMD||19.7in (1.64ft)||Natural 4000K||4000 K||155 lm/ft||255 lm||-||-||210 mA||2.5 W||-||$7.95|
|RLBN-WW30SMD||19.7in (1.64ft)||Warm 3500K||3500 K||137 lm/ft||225 lm||-||-||180 mA||2.2 W||-||$7.95|
|RLBN-B30SMD||19.7in (1.64ft)||Blue||470 nm||20117 mcd/ft||-||-||-||180 mA||2.2 W||-||$7.95|
|RLBN-G30SMD||19.7in (1.64ft)||Green||525 nm||31090 mcd/ft||-||-||-||120 mA||1.4 W||-||$7.95|
|RLBN-R30SMD||19.7in (1.64ft)||Red||630 nm||23774 mcd/ft||-||-||-||180 mA||2.2 W||-||$7.95|
|RLBN-Y30SMD||19.7in (1.64ft)||Yellow||590 nm||23774 mcd/ft||-||-||-||170 mA||2 W||-||$7.95|
C21 Jumper Interconnect wire
C21 Jumper Power wire
Use our Calculator
Use our calculator.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
I use these strips to illuminate the interior of cabinets that build. They are thin enough in both thickness and width to fit nicely into a 1/2"x1/2" routed channel that is run around the outer edge of the cabinet. The units cast plenty of light that washes over the interior of the cabinet.
We have put all of these in our motor home.. They give off more light than the old florescent bulb we had before. They are cool even when on for hours so the camper does not heat up. We boon dock a lot so takes less power to run. Recommend to everyone it is worth the change. Easy to install.
Rigid LED light bars
Great product. Produces the natural light that I expected.
Rated a 3 because after receiving and installing the lights I noticed some were slightly different than others. All marked natural white. Further investigation - the LEDs on some of the lights were a slightly different shade of yellow than the others. Fortunately, I had enough length of the NW to accomplish my project.
Someone should make sure the lights are all the same before purchase.
Excellent replacement for florescent lights
I removed the bulbsand ballast from 12 vdc florescent light fixtures and the LEDs worked great with a slightly brighter light.
Great for the price
They are an excellent price and give a nice range of brightness with a dimmer circuit. One bar at full power is good light, two are enough for reading. The plastic mounts sold for them makes them easy to install. They are flimsy so I wouldn't use them in an application where there is any impact.
I am an Electrical contractor, and I've been using these light strips for my customers under cabinet lighting needs, both for new installs, and replacement of existing lighting. Much brighter, less heat, less power draw. Don't get better than that!
Report Review as Inappropriate
Customers Also Purchased
Mean Well LED Power Supply - AP series 12~35W Single Output LED Power Supply - 12V DC
Starting at $7.95
Outdoor LED Light Strips - Weatherproof LED Tape Light with 18 SMDs/ft. - 1 Chip SMD LED 3528
Starting at $7.88
LED Strip Lights - LED Tape Light with 18 SMDs/ft. and LC2 Connector - 1 Chip SMD LED 3528
Starting at $7.88
Mean Well LED Power Supply - LPV series 20~100W Single Output LED Power Supply - 12V DC
Starting at $19.95
LED Strip Lights - Flexible Custom Length LED Tape Light with 18 SMDs/ft. - 1 Chip SMD LED 3528
Starting at $1.29
LED Light Strip - High CRI - 16.4ft (5m) Super Slim High Density LED Tape Light with 27 SMDs/ft. - 1 Chip SMD LED 3528 with LC2 Connector
Starting at $59.95