Smartphone or Tablet WiFi Compatible RGB Controller w/ RF Touch Color Remote - Dynamic Color-Changing Modes

MiLight WiFi Smart RGB Controller with Touch Remote - 6 Amps/Channel - RGB Controller

brand logo
Part Number
Manufacturer Part Number: FUT025
In Stock
$29.99 ea.
Free Shipping
On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Frequently Bought Together
Total Price: $49.98


Universal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control any 12VDC RGB LED product with in range of about 100 feet. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options from pure white mode or 19 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.


  • Accent Lighting
  • Home Lighting
  • Remote Controlled Lighting
2 Years
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More


Amps 18 Amps
Amps Per Channel 6 Amps/CH
Battery Type 2 x AAA
Channels 3 Channels
Control Type Handheld (RF) Remote
Input Connection Type Screw Terminal
Manufacturer Part Number FUT025
Output Connection Type Screw Terminals
Radio Frequency 2.4 GHZ
Voltage 12-24 VDC
Warranty 2 Year
Print Specifications

 Installation And Usage Guide 

Controller Pairing
The LDRF-RGB6-TC4 features RF remote to controller device pairing to help eliminate interference from other nearby units. If you wish to control several controller devices from a single RF remote, the controllers first must be re-programmed.
The easiest and fastest way to re-program several controller devices at once is to have them share a power supply or all plug in to a single power strip.
Once programmed you can provide power as you would otherwise, sharing is only needed for the programming phase to ease the process -- Re-programming can be done one device at a time also.
Programming Procedure
1. Wire all controller devices to one power supply or power strip but don’t turn it on yet.
2. With the power off, grab the remote.
3. Turn on the power supply
4. Within 3 seconds of providing power press the button button once.
If programming was successful any connected light strips should blink twice slowly and remote will immediately be functional.
RF Touch Color Remote Control
wall controller
*RF remote controller has a signal range up to 65ft (20m) and requires 2 x AAA batteries (not included).

Installation Instructions
Pre-test & Configure
  • Remove strip from reel and make connections to power supply and controller (see "Method 1" diagram). Briefly turn on strip using the included remote controller to ensure proper operation of the strip, power supply, controller, and remote.
  • Choose your desired yet suitable location for the power supply and controller. For use in dry locations only.
  • Ensure all installation surfaces are clean and dry.
  • Begin to remove strip’s backing while adhering to desired mounting surface. Press firmly to secure strips to surface. Mount controller and power supply to desired location.
  • DO NOT connect controller or strips directly to 120 VAC power. This controller requires a 12 or 24 VDC power supply.
  • DO NOT exeec max load of 18 Amps, overloading the controller may cause overheating, shorting, and possibly failure of controller.
  • Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
  • Indoor Installation Only
  • Always observe proper polarity when connecting power and load.
wiring method 1

Wiring Method

View Larger Image

Modes List
Mode Function Brightness Speed Controls
1 Static White
2 White fade on and off
3 7-color fade
4 Tri-color crossfade
5 7-color instant change
6 Tri-color instant change
7 Red/Green instant change
8 Red/Blue instant change
9 Blue/Green instant change
10 White strobe
11 White flash strobe
12 Red strobe
13 Red flash strobe
14 Green strobe
15 Green flash strobe
16 Blue strobe
17 Blue flash strobe
18 Yellow strobe
19 Yellow flash strobe
20 Random

Accessories & Power Supplies


3.8 / 5 stars
5 reviews

Customer Submitted Photos
Write Your Own Review

Write a Review

You're reviewing: MiLight WiFi Smart RGB Controller with Touch Remote - 6 Amps/Channel - RGB Controller

Review Guidelines reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs