This Wi-Fi Hub allows you to control any compatible LED smart bulbs or fixtures with an Apple (iOS) or Android (version 4.3 and above) smartphone or tablet. This device uses the updated MiLight 3.0 app. The hub must be used with Wi-Fi-compatible LED bulbs or fixtures and can also be used with an RGB, RGBW, or RGB+CCT controller to allow for control of LED strips and other LED lights. Simply plug the Wi-Fi hub into a computer with the included USB cord or into an outlet by using a USB wall adapter, and download the free MiLight 3.0 app on your Apple or Android device. Connect to the Wi-Fi Hub using your device's Wi-Fi settings, and use the app to sync your LED lights (see PDF instructions for details).
Please note: MiLight and MiBoxer are compatible smart technology brands. Products under these names are able to work interchangeably with each other. This Wi-Fi Hub will work with the new MiLight 3.0 app only, but it is also compatible with any product that was previously controlled by MiLight version 2.0.
Applications
Home Accent Lighting
Home Lighting
Remote Controlled Lighting
Smartphone Accessory Light
FCC
CE
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
This Wi-Fi LED Controller Hub is compatible with all of our TC4 series 2.4Ghz RF LED Controllers. After completing this simple setup using just your smartphone or tablet
and your existing or new LED lights and Wi-Fi
compatible LED controller, you can have complete
Wi-Fi control of all of your LED lights in your home.
2. Open Wi-Fi Settings on phone or tablet. Select Milight3.0-xxxxxx. Close Wi-Fi Settings.
iOSfig. 2
Androidfig. 2
3. Open Mi-Light app and wait for the WIFI-CON to populate in the Device List. WIFI-CON is now ready to use in Stand Alone mode.
Continue for Smart Link mode.
iOS and Anroidfig. 3
4. Re-open Wi-Fi Settings on phone or tablet. Select your local Wi-Fi network from the list
iOSfig 4.
Anroidfig. 4
5. Press “RST” on WIFI-CON once to initiate Smart Link Mode. “SYS” indicator will flash slowly and “Link” indicator will flash fast.
6. On the Mi-Light app, press “+” (fig. 6 - Screen 1) to add the WIFI-CON to your network using Smart Link.
Enter your network password and press “Start Configuration”. (fig. 6 - Screen 2)
WIFI-CON is linked to your network when “Link” indicator is solid and “SYS” indicator is flashing slowly.
Exit Configuration by pressing “OK” or “Cancel” and “Back” buttons.
iOS and Androidfig 6.
7. Select WIFI-CON from Device List. (fig. 7) To add additional WIFI-CON(s), repeat steps 3~8 after power is applied.
iOS and Androidfig 7.
Titling a WIFI-CON:
From Device List From the Device List, swipe WIFI-CON to be titled left. Select “Edit” (fig. 8) and in the “Name:” field enter the new title and press “OK”. (fig. 9)
iOS and Androidfig 8.
iOS and Androidfig 9.
From Control Screen From the Control Screen, press and hold the Zone to renamed. (fig. 10 - Screen 1) A pop up window will appear. Enter the new name and press “OK.” (fig. 10 - Screen 2)
iOS and Androidfig 10.
Accessories & Power Supplies
Reviews
50%
2.5 / 5 stars
4 reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs
Choose sharing option
×
Email
URL
Get 10% off your order
And be the first to know about the new products, sales, and more.
iOS fig. 1
