Intelligent PIR Motion Sensor Switch
Part Number
LPIR-5A-x
Overview
Adjustable PIR switch automatically activates connected 12VDC LED lights when human motion is detected. Adjustable sensitivity and light-on time. Can be set to remain on for any period of time between 30 seconds and 9 minutes. Motion detection range is with in 7 meters and 160 degrees from center of PIR sensor. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series power supplies. Single channel - 5 Amp maximum load. 12VDC operation.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Similar PIR Sensors and Proximity Switches
| Type | Amps | Amps Per Channel | Special Features | Price | ||
|
|
3 Amps
|
3 Amps/CH
|
|
$7.99
ea.
|
|
|
|
3 Amps
|
3 Amps/CH
|
|
$9.99
ea.
|
|
|
PIR Motion Sensor
|
8 Amps
|
8 Amps/CH
|
Motion Sensor
|
$7.99
ea.
|
|
|
|
5 Amps
|
5 Amps/CH
|
|
$18.99
ea.
|
|
|
PIR Motion Sensor
|
6 Amps
|
6 Amps/CH
|
Motion Sensor
|
$12.99
ea.
|
|
Specifications
| Input Connection Type | 5.5 mm x 2.1 mm DC Barrel |
|---|---|
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders. -
$2.99 ea.CPS-C21 CPS Power Adapter for LB1 & RLBN series Light Bars - Adapter Part Number: CPS-C21In stockCPS power adapter cable for connecting LB1 and RLBN series light bars to a 12 volt power source. 60.9cm(24in) length. -
$1.99 ea.LB4 series CPS Power Adapter Cable - Adapter CPS-Cable Part Number: CPS-LB4In stockLB4 adapter cable with 5.5mm barrel plug to connect CPS series power supplies to LB4 product. 2 foot length. -
$0.85 ea.CPS series Male to Male Direct Barrel Connectors - Male to Male Part Number: CPS-M2MIn stockStandard 5.5mm male to male direct connector for CPS series Compact Power supplies or BPS Battery Power supply. Can be used to extend lengths of power wires. -
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length. -
$2.49 ea.LBFA-PRA50 LuxBar Right Angle Power Connector - 50cm[19.7in] Part Number: LBFA-PRA50In stockLBFA-PRA50 Right Angle Power Connector for LBFA LuxBar series light fixtures. Provides power using 5.5mm barrel plug found on all CPS power supplies. 19.7in (50cm) in length. -
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each. -
$6.99 ea.Single Color LED Controller with LC2 Connector - In-Line Controller with Dynamic Modes - Mini Single Color LED Controller - LC2 Part Number: MLD-5ALC2In stockFor use with LC2 connectors. Universal single color mini LED dimmer can dim any 12VDC LED products from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles. -
$1.99 ea.NFLS8-2CHCPS 8mm Flexible Light Strip CPS Adapter Cable Clamp - Adapter CPS Cable Clamp Part Number: NFLS8-2CHCPSIn stock8mm Flexible Light Strip CPS Adapter Cable Clamp with 5.5mm barrel plug. Use for connecting NFLS-x Flexible Light Strips and Strip segments seen above. 23.62cm(9.3in) length. -
$7.99 ea.iSensor Proximity Switch - Open-Close On-Off Switch - IR switch Part Number: PLS-3AIn stockUniversal Proximity Sensor automatically powers LED Lights on when the sensor is activated (not blocked or covered). When cabinet, closet, or cubbie door is closed on proximity sensor, LED lights turn off, when door opens up, lights turn on automatically. Connects 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. Proximity range is with in 6" from IR sensor. 3M double sided adhesive included
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
View all
All Accessories1 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders.
-
$2.99 ea.CPS-C21 CPS Power Adapter for LB1 & RLBN series Light Bars - Adapter Part Number: CPS-C21In stockCPS power adapter cable for connecting LB1 and RLBN series light bars to a 12 volt power source. 60.9cm(24in) length.
-
$1.99 ea.LB4 series CPS Power Adapter Cable - Adapter CPS-Cable Part Number: CPS-LB4In stockLB4 adapter cable with 5.5mm barrel plug to connect CPS series power supplies to LB4 product. 2 foot length.
-
$0.85 ea.CPS series Male to Male Direct Barrel Connectors - Male to Male Part Number: CPS-M2MIn stockStandard 5.5mm male to male direct connector for CPS series Compact Power supplies or BPS Battery Power supply. Can be used to extend lengths of power wires.
-
$1.49 ea.CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PTIn stockPigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
-
$2.49 ea.LBFA-PRA50 LuxBar Right Angle Power Connector - 50cm[19.7in] Part Number: LBFA-PRA50In stockLBFA-PRA50 Right Angle Power Connector for LBFA LuxBar series light fixtures. Provides power using 5.5mm barrel plug found on all CPS power supplies. 19.7in (50cm) in length.
-
$6.99 ea.Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPSIn stockUniversal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each.
-
$6.99 ea.Single Color LED Controller with LC2 Connector - In-Line Controller with Dynamic Modes - Mini Single Color LED Controller - LC2 Part Number: MLD-5ALC2In stockFor use with LC2 connectors. Universal single color mini LED dimmer can dim any 12VDC LED products from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles.
-
$1.99 ea.NFLS8-2CHCPS 8mm Flexible Light Strip CPS Adapter Cable Clamp - Adapter CPS Cable Clamp Part Number: NFLS8-2CHCPSIn stock8mm Flexible Light Strip CPS Adapter Cable Clamp with 5.5mm barrel plug. Use for connecting NFLS-x Flexible Light Strips and Strip segments seen above. 23.62cm(9.3in) length.
-
$7.99 ea.iSensor Proximity Switch - Open-Close On-Off Switch - IR switch Part Number: PLS-3AIn stockUniversal Proximity Sensor automatically powers LED Lights on when the sensor is activated (not blocked or covered). When cabinet, closet, or cubbie door is closed on proximity sensor, LED lights turn off, when door opens up, lights turn on automatically. Connects 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. Proximity range is with in 6" from IR sensor. 3M double sided adhesive included
-
$9.99 ea.iSensor Proximity Switch - Touchless On-Off Switch - IR Switch Part Number: TLS-3AIn stockUniversal Infrared Sensor automatically powers on LED Lights when sensor is activated by any object with in 6" infrared detection range. Connect any 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. 3M double sided adhesive included.
-
$1.99 ea.Universal 12V Vehicle Cigarette Lighter Power Adapter - Vehicle Power Adapter Part Number: VPA-8AIn stockUniversal 12VDC cigarette lighter adapter for LED products that are suitable for vehicle applications. Converts plug into universal 5.5mm DC jack barrel connector for CPS accessories and adapters. -
View all
Connectors22 additional compatible accessories
Reviews
4 / 5 stars
10 reviews
4 / 5 stars
10 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*