LED Tail Brake/Turn Bulbs
All of Our LED Bulbs Feature: |
||
|
|
|
  
If your car is not listed look at your bulbs and use the "more info" buttons near our bulbs to compare physical dimensions to find matches |
||
1157 Dual & 1156 Single Contact BA15 LED
Automotive Bulbs
Motorcycle Tail/Brake & License Plate Bulb15mm Bayonet base bulbs for tail/brake/turn light applications. 1157 (BAY15D) - Dual Contact and Dual Intensity. 1156 (BA15S) - Single Contact and Single Intensity. Select LED color to match vehicle lens color. 12VDC operation
9-LED & 15-LED 67 & 68 Bulbs, 12-LED / 19-LED / 30-LED 1156 & 1157 Bulbs, 24-LED 1156 & 1157 Bulbs, 30-LED Right Angle 1156 & 1157 Bulbs. For turn signal bulb installations see Flashers and Load Resistors.
9-LED & 15-LED 67 (BA15S) & 68 (BAY15D) Bulbs
9-LED with 67 & 68 base: 9 x 5mm LEDs, Narrow 15 or Wide 100 degree beam
15-LED with 67 base: 9 x 5mm LEDs, 6 x 3mm Radially Mounted LEDs, Narrow 30 degree beam. For turn signal bulb installations see Flashers and Load Resistors.
15
30
100
12-LED / 19-LED / 30-LED 1156 & 1157 Bulbs
12 x 5mm LEDS / 19 x 5mm LEDs / 30 x 5mm LEDs. Narrow 18 degree beam or Wide 100 degree beam.. For turn signal bulb installations see Flashers and Load Resistors.
18
100
24-LED 1156 & 1157 Bulbs
18 x 5mm LEDs, 6 x 3mm Radially Mounted LEDs. Narrow 18 degree beam, Wide 100 degree beam. For turn signal bulb installations see Flashers and Load Resistors.
18
100
30-LED Right Angle 1156 Bulbs
30 x 5mm LEDs, Facing 90 degree right angle from base. Typical Motorcycle Bulb. Narrow 35 degree beam. For turn signal bulb installations see Flashers and Load Resistors.
35
2 Watt LED Adjustable Right Angle 1156 & 1157 Bulbs
2 Watt LED 12VDC replacement bulb for aimable right angle applications. Typical Motorcycle Bulb. Wide 140 degree beam aimed 90 degrees from rotatable base allows beam to point any direction around the axis of the base. For turn signal bulb
installations see Flashers and Load Resistors.
140
2 Watt 67 & 68 Bulbs
67 and 68 base bulbs with High Power 3 X 2W Chip LEDs and a wide 90 degree focused beam.
For turn signal bulb installations see Flashers and Load Resistors.
12~24VDC
90
1157 Dual & 1156 Single Contact BA15 High Power SMD LED Automotive Bulbs
15mm Spider and Tower Type Bayonet base bulbs for tail/brake/turn light applications. 1157 (BAY15D) - Dual Contact and Dual Intensity. 1156 (BA15S) - Single Contact and Single Intensity. Select LED color to match vehicle lens color. 12VDC operation
18-LED Tower Type 1156 & 1157 Bulbs, 45-LED Tower Type 1156 & 1157 Bulbs, 30-LED Spider Light 1156 & 1157 Bulbs. For turn signal bulb installations see Flashers and Load Resistors.
18-LED Tower Type 1156 & 1157 Bulbs
3 x Foward Firing SMD LEDs, 15 x Radially Mounted 5050SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal installations see
360
45-LED Tower Type 1156 & 1157 Bulbs
9 x Foward Firing SMD LEDs, 36 x Radially Mounted SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal installations see
360
30-LED Spider Light 1156 & 1157 Bulbs
6 x SMD LEDs on 5 spring loaded expandable circuit boards. Spring loaded circuit boards fold into center axis then expand outward when in lamp housing for 3 inch diameter of lens coverage - 120 degree beam. For turn signal installations see
120
1157 Dual & 1156 Single Contact BA15 High Power 3 & 4 Watt LED Automotive Bulbs
15mm Bayonet base bulbs for tail/brake/turn light applications. 1157 (BAY15D) - Dual Contact and Dual Intensity. 1156 (BA15S) - Single Contact and Single Intensity. Select LED color to match vehicle lens color. 12VDC operation
4 Watt High Power 1156 & 1157 Bulbs, High Power 3 Watt 1156 & 1157 Bulbs. For turn signal bulb installations see Flashers and Load Resistors.
4 Watt High Power 1156 & 1157 Bulbs
4 Watt 3x1W series: 3 x 1.3Watt High Power LEDs, 90 degree beam with lens, 130 degree beam without lens. For turn signal bulb installations see Flashers and Load Resistors.
3 Watt High Power 1156 & 1157 Bulbs
3 Watt LX3 series: 1 x 3Watt Luxeon LED, 130 degree beam. For turn signal bulb installations see Flashers and Load Resistors.
3 Watt High Power 1156 & 1157 Bulbs w/ Reflector Lens
1 x 3 Watt High Power LED behind integrated reflector lens emits 320 degree beam that maximizes tail/brake/turn reflective housings, eliminating hot spots.
Integrated Brake Flasher: Internal Brake Flashing Technology flashes LED 3 times then resumes steady on brake/bright mode - every 1 min interval of brake/bright pressed repeats 3x flash
320
1 Watt High Power 1156 & 1157 Bulbs w/ Stock Lens
1 Watt High Power CREE XPE LED behind integrated replica stock lens emits 180 degree beam that maximizes tail/brake/turn reflective housings.
For turn signal bulb installations see Flashers and Load Resistors.
180
BA15 Empty Bases and Wired Sockets
Single Contact Single Intensity (BA15S - 1156), Dual Contact Single Intensity (BA15D - 1142), Dual Contact Dual Intensity (BAY15D - 1157) 15mm Bayonet Base - Wired sockets have 5 1/4 inch long power wires, screw mount base 1 1/4 inch apart
G4/MR16/MR11 to BA15 Adapter
Convert BA15S single intensity single contact base with parallel locking pins, BA15D single intensity dual contact base with parallel locking pins, or BAY15D dual intensity dual contact base with offset locking pins to fit G4/MR16/MR11 base lamps
3156 & 3157 Wedge Base LED Bulbs
16mm Wedge base bulbs for tail / brake / turn light applications. 3157 - Dual Contact and Dual Intensity. 3156 - Single Contact and Single Intensity. Select LED color to match vehicle lens color. 12VDC operation
High Power 3156 & 3157 Bulbs, 18-LED Tower Type 3156 & 3157 Bulbs, 25-LED 3156 & 3157 Bulbs.
See 3157 Motorcycle Tail/Brake and License Plate Illumination Bulb
For turn signal bulb installations see Flashers and Load Resistors.
High Power 3156 & 3157 Bulbs
3Watt LX3 series: 1 x 3Watt Luxeon LED, 130 degree beam.
130
See 3157 Motorcycle Tail/Brake and License Plate Illumination Bulb
For turn signal bulb installations see Flashers and Load Resistors.
18-LED Tower Type 3156 & 3157 Bulbs
3 x Foward Firing SMD LEDs, 15 x Radially Mounted SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp.
360
See 3157 Motorcycle Tail/Brake and License Plate Illumination Bulb
For turn signal bulb installations see Flashers and Load Resistors.
25-LED 3156 & 3157 Bulbs
19 x 5mm LEDs, 6 x 3mm Radially Mounted LEDs. 35 degree beam.
35
See 3157 Motorcycle Tail/Brake and License Plate Illumination Bulb
For turn signal bulb installations see Flashers and Load Resistors.
45-LED Tower Type 3156 & 3157 Bulbs
9 x Foward Firing SMD LEDs, 36 x Radially Mounted SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal bulb installations see Flashers and Load Resistors.
360
18 and 45 LED Tower Type 3157 Bulbs with CK Wiring
3 x Foward Firing SMD LEDs, 15 x Radially Mounted SMD LEDs or 9 x Foward Firing SMD LEDs, 36 x Radially Mounted SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal bulb installations see Flashers and Load Resistors.
360
High Power 3156 & 3157 Bulbs with Reflector Lens
1 x 3 Watt High Power LED behind integrated reflector lens emits 320 degree beam that maximizes tail/brake/turn reflective housings, eliminating hot spots.
Integrated Brake Flasher: Internal Brake Flashing Technology flashes LED 3 times then resumes steady on brake/bright mode - every 1 min interval of brake/bright pressed repeats 3x flash
For turn signal bulb installations see Flashers and Load Resistors.
320
7440 & 7443 Wedge Base LED Bulbs
16mm Wedge base bulbs for tail / brake / turn light applications. 7443 - Dual Contact and Dual Intensity. 7440 - Single Contact and Single Intensity. Select LED color to match vehicle lens color. 12VDC operation
High Power 7440 & 7443 Bulbs, 15-LED 7440 & 7443 Bulbs, High Power 7440 & 7443 Bulbs. For turn signal bulb installations see Flashers and Load Resistors.
High Power 7440 & 7443 Bulbs
3Watt LX3 series: 1 x 3Watt Luxeon LED 130 degree beam.
15-LED 7440 & 7443 Bulbs
9 x 5mm LEDs, 6 x 3mm Radially Mounted LEDs, 35 degree beam.
High Power 7440 & 7443 Bulbs
HP3 series: 3 x 6 chip SMD LEDs, 120 degree beam. For turn signal bulb installations
see Flashers and Load Resistors.
18-LED 7440 & 7443 Tower Wedge Bulbs
3 x Foward Firing 5050SMD LEDs, 15 x Radially Mounted 5050SMD LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal bulb installations see Flashers and Load Resistors.
45-LED 7440 & 7443 Tower Wedge Bulbs
THIS IS OUR BRIGHTEST 7440 and 7443 WEDGE BULB. 9 x Foward Firing SMD LEDs, 36 x Radially Mounted LEDs, 120 degree beam LEDs, 360 degree beam lamp. These bulbs emulate standard incandescent stock bulb with entire lamp housing illumination and no hotspot. For turn signal bulb installations see Flashers and Load
High Power 7440 & 7443 Bulbs with Reflector Lens
1 x 3 Watt High Power LED behind integrated reflector lens emits 320 degree beam that maximizes tail/brake/turn reflective housings, eliminating hot spots.
Integrated Brake Flasher: Internal Brake Flashing Technology flashes LED 3 times then resumes steady on brake/bright mode - every 1 min interval of brake/bright pressed repeats 3x flash
For turn signal bulb installations see Flashers and Load Resistors.
320
LED License Plate Light Fixtures
Surface mount LED fixtures with Cool White or Warm White LEDs designed for vehicle license plate illumination. Also used for general lighting applications such as lighting box truck, RV/camper/popup, utility and fully enclosed motorcycle trailers, engine and battery compartments, cabinets, bilges, storage compartments, utility rooms, and genset spaces.
LPC-W4, LPC-W2, LPC-W5 LED License Plate Lights
LPC-W2 LED License Plate Lights
License Plate Light with 2 High Power SMD LEDs. Waterproof Polycarbonate design - 6.5" long power wires, 20 gauge - Includes chrome plated brass bezel, rubber gasket and 2 stainless steel mounting screws - Current Draw: 0.04Amp (40ma) @ 12 VDC.
Information:
Available Colors:
LPC-W5 License Plate Lights
Universal License Plate Light with 5 White narrow beam LEDs mounted at an arc array to spread beam pattern. Mounting holes are 3 1/4" apart - Waterproof with Stainless Steel base and rubber grommet - Current Draw: 0.035Amp (35ma) @ 12VDC
Information:
Available Colors:
LPC-W4 LED License Plate Lights
Universal License Plate Light with 4 White High Flux LEDs. Waterproof polycarbonate design includes black plastic bezel housing with 2 mounting screw holes. 6 inch power wires. Current Draw: .020Amp (20ma) @12VDC
Information:
LED Strobe Modules and Bulbs
Increase safety by heightening vehicle LED tail and brake light visiblity or add safety strobe mode to existing tail lights using LED Strobe Modules or replace them with LED Brake Light Flasher Bulbs. These are ideal for emergency vehicles. Easy installation for LED tail or brake lamps - 12~24VDC operation.
FL2S-10A Brake Light Strobe Module, LSC-100A Brake Light Strobe Module, LSC-100B Pulsing Strobe Module, and LED Brake Light Flasher Bulbs.
*Please check local laws before installing strobe modules.
FL2S-10A LED Brake Light Strobe Module
Upon applying the brake, strobe module heightens visibility by causing brake light bulb to flash 20 times for 2 seconds (10Hz), and then remain in constant on mode for as long as brake is applied. Use for LED brake lights & reverse lights only, 10 Amp maximum load, Weatherproof.
LSC-100A LED Brake Light Strobe Module
Upon applying the brake, strobe module causes LEDs to flash 4x rapidly for 0.4 seconds and then slowly 4x for 2.6 seconds, then remain in constant on bright mode for as long as brake is applied. Use for LED brake lights & reverse lights only. 1.25 Amp max load - Weatherproof.
LSC-100B Continuous Pulsing Strobe Module
Continuous Pulsing Strobe module will cause LED lights bulb to flash 6x rapidly in 1 second. Use for LED warning/hazard lights. 1.25 Amp max load - Weatherproof. Mount using included double-sided adhesive.
LED Brake Light Flasher Bulbs
1 x 3 Watt High Power LED behind integrated reflector lens emits 320 degree beam that maximizes tail/brake/turn reflective housings, eliminating hot spots.
Integrated Brake Flasher: Internal Brake Flashing Technology flashes LED 3 times then resumes steady on brake/bright mode - every 1 min interval of brake/bright pressed repeats 3x flash.
MSC2-24W LED Strobe Controller
Multi-function Strobe Controller with right and left outputs and 10 alternating dynamic strobe modes. LED indicator lights on controller demonstrate the mode selected. Use for LED emergency, warning and hazard lights. 12~24VDC operation - 2 Amp max load. Mount using included double-sided adhesive.
Electronic LED Flashers
Many types of LED compatible car and universal motorcycle/scooter flashers
You should definitely use one of these instead of Load Resistors if we have one to fit your vehicle. They operate at the correct flash rate with LED or standard filament bulbs. 10~15 Volts DC - Flash Rate: 80 per minute.
Load Resistor Kits
One Load Resistor is required for each bulb. LED bulbs may cause some vehicles to indicate a bulb is burnt out (because of their low power consumption). Some cars indicate this by turning on a bad bulb indicator. This can be remedied with load resistors wired across the LED bulbs to simulate a filament bulb load.
RL-650 Tail Light Load Resistor, RL-2525 Marker Lamp Load Resistor
RL-650 Tail Light Load Resistor
6 Ohm, 50 Watt resistors can be connected across the turn signal bulbs to simulate the load of a regular filament bulb (2 Amp load). Measuers 1.96"L x .64"W x .60"H. Leads are 7.5 inches long. Used for 1156/1157, 3156/3157, 7440/7443 bulbs.
RL-2525 Marker Lamp Load Resistor
25 Ohm, 25 Watt resistors can be connected across marker lamps to simulate the load of a regular filament bulb. Measures 1.08"L x .59"W x .62"H. Leads are 7.5 inches long. Used for 194, BA9s and small LED marker assemblies.
Don't see what you're looking for here ?
Check our Other Bulb category for RV, Marine and Other Application bulbs which include
PCB series lamps - designed for RV and Boat overhead lighting applications
1142 bulbs - dual contact 15mm with no connection to metal base (single intensity)
24 and 6 Volt DC - 15mm bayonet base bulbs - Sailboat and Antique vehicle applications
|
 |
|
