Vehicle Information
Year: 2002 Make: Ford Model: Focus
SubModel: Sedan
Select a new vehicle
![[]](/images/graphics/box_unchecked.png)
Fog/Driving Light
Front Sidemarker
![[]](/images/graphics/box_checked.png)
High & Low Beam Headlamp
Back Up Light
High Mount Stop Light
License Plate
Narrow Results
Visual ViewSearch:
No Stock Bulb Found
Color
White
UV (Blacklight)
Blue
Green
Amber
Red
Cool White
Natural White
Warm White
Polarized
LED Car Bulb FAQ and Notes
LED Car Bulb Cross Reference
Lens and Bulb Color
Color Temperature Comparison
Clearance LED Car Bulbs
Part Number: 194 Cross Reference: WLED Part Number Aliases:194ST, 194LL 
IMPORTANT NOTES AND GUIDELINES. PLEASE READ:- LED Emitting Color Should Match Lens Color ...Read More
For best results the LED color should be the same as the lens color. If bulb is behind a clear lens, use the appropriate color for turn and brake light functions.
- Your vehicle may require an LED compatible Flasher or Load Resistor ...Read More
LED brake/tail lamps will not flash with thermal flasher units due to their extremely low current draw. Also, with stock flasher units, the turn signals may flash faster than normal (Hyper-Flash). These installations will require an electronic flasher unit, available here (for some vehicles) or at your auto parts store. Try to find flashers designed to work with LED bulbs, they will say "LED compatible". Often HEAVY DUTY flashers will also work with LED bulbs.
We offer some LED Flashers but we do not know which one (if any) will fit your vehicle. You will have to compare the pin-out of your flasher with the pin-outs of the flashers we offer, to see if we have a match, BEFORE you order one. Sorry but we do not have a flasher application list or the expertise to tell you which of our flashers will fit your vehicle.
Another fix is the installation of Load Resistors which are wired across (in parallel with) the turn signal bulbs to simulate the load of a standard filament bulb. One Load Resistor is required for each bulb.
Links:
Flashers
Load Resistors
1.
Part Number: WLED-xHP6-AC | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
Dimensions: 25.00mm(L) x 14.90mm(W) x 5.75mm(H)
Select Color:
Recommended Selection(s): Miniature Wedge Base Bulb (194/168 type)with 6 High Power LEDs. 12 Volt AC/DC, 360 Viewing Angle. Non-Polarized bulb.
2.
Part Number: WLED-xHP5 | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
Dimensions: 25.35mm(L) x 12.14mm(W) x 11.06mm(H)
Select Color:
Recommended Selection(s): WLED series tower type 12VDC replacement miniature wedge base lamp with 5 radially mounted high power SMD LEDs. Replaces 194/168/912 size wedge base bulbs. 360 degree viewing angle eliminates hot spots maximizing assembly housing illumination.
3.
Part Number: WLED-x5-CBT | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
Volts
12 VDC
Dimensions: 26.12mm(L) x 11.30mm(W) x 11.30mm(H)
Select Color:
Recommended Selection(s): WLED series tower type 12VDC CAN bus replacement miniature wedge base lamp with 5 radially mounted high power SMD LEDs. Replaces 194/168/912 size wedge base bulbs. Error free LED bulbs are specifically designed with built-in load resistors to allow them to be used with CAN(Controller Area Network) Bus equipped vehicles without triggering the OBC (on-board computer), commonly found in European vehicles such as BMW, Audi, Mercedes, Volkswagen, Porsches. CAN Bus bulbs should not be used in non CAN Bus applications
4.
Part Number: WLED-x5 | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
LED Package
3 mm (T-1)
Dimensions: 24.10mm(L) x 14.00mm(W) x 14.00mm(H)
Select Color:
Recommended Selection(s): WLED series 12VDC replacement miniature wedge base lamp with 4 radially mounted LEDs aiming out the sides and one high flux LED on top. Replaces 194/168/912 size wedge base bulbs. 220 degree viewing angle eliminates hot spots maximizing assembly housing illumination.
5.
Part Number: WLED-xHP | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
Dimensions: 20.10mm(L) x 10.00mm(W) x 10.00mm(H)
Select Color:
Recommended Selection(s): WLED series 12VDC replacement miniature wedge base lamp with 1 high power SMD LED. Replaces 194/168/912 size wedge base bulbs. Wide 120 degree beam pattern.
6.
Part Number: WLED-x-x | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Base
Miniature Wedge
Dimensions: 21.50mm(L) x 9.85mm(W) x 9.85mm(H)
Select Color:
Recommended Selection(s): Select Beam Angle:
Recommended Selection(s): WLED series 12VDC replacement miniature wedge base lamp with 1 wide angle LED. Replaces 194/168/912 size wedge base bulbs. Select from wide 90 or 120 degree beam patterns.
7.
Part Number: WLED-x4-x | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Base
Miniature Wedge
LED Package
3 mm (T-1)
Dimensions: 25.75mm(L) x 11.00mm(W) x 11.00mm(H)
Select Color:
Recommended Selection(s): Select Beam Angle:
Recommended Selection(s): WLED series 12VDC replacement miniature wedge base lamp with 4 narrow or wide angle LEDs. Replaces 194/168/912 size wedge base bulbs. Select from narrow 32 or wide 90 degree beam patterns.
8.
Part Number: WLED-x6 | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Base
Miniature Wedge
LED Package
3 mm (T-1)
Dimensions: 16.50mm(L) x 11.00mm(W) x 11.00mm(H)
Select Color:
Recommended Selection(s): WLED series 12VDC replacement miniature wedge base lamp with 6 LEDs. Replaces 194/168/912 size wedge base bulbs. Narrow 35 degree beam pattern.
9.
Part Number: WLED-xHP13-T | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Oversize
Yes
Base
Miniature Wedge
Dimensions: 39.36mm(L) x 11.56mm(W) x 11.56mm(H)
Select Color:
Recommended Selection(s): WLED series tower type 12VDC replacement miniature wedge base lamp with 13 radially mounted high power SMD LEDs. Replaces 194/168/912 size wedge base bulbs. 360 degree viewing angle eliminates hot spots maximizing assembly housing illumination.
10.
Part Number: WLED-xHP15-T | UPC: | Stock: In Stock
Relative Intensity
Cross Reference Number
921/T5, WLED
Beam Angle
Oversize
Yes
Base
Miniature Wedge
Dimensions: 38.45mm(L) x 12.03mm(W) x 12.03mm(H)
Select Color:
Recommended Selection(s): WLED series tower type 12VDC replacement miniature wedge base lamp with 15 radially mounted high power SMD LEDs. Replaces 194/168/912 size wedge base bulbs. 360 degree viewing angle eliminates hot spots maximizing assembly housing illumination.
