Toggle Nav
My Cart 0
Top
Shop By Category
Account
Site Tools
5m Single Color LED Strip Light - Eco™ Series Tape Light - 12V/24V - IP54 Weatherproof

5m Single Color Weatherproof LED Strip Light - Eco Series Tape Light - IP64 - 12V / 24V

Part Number
EC-IP54-Color-5m

Features

  • IP64 Weatherproof rated
  • 3M™ adhesive backing for surface mounting
  • 0-100% dimmable
  • Lifetime warranty
View more details
In Stock

Starting at $51.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
9 photos

Overview

Description
This flexible LED strip light produces brilliant illumination in a wide range of high-quality color tones, and is a top choice for ambient and accent lighting. A strong, ultra-thin silicone spray coating protects against water and debris. Peel-and-stick 3M™ adhesive backing enables fast, easy mounting. Backed by a lifetime warranty.
Product Details:
  • Dependable, industry-standard 3528 SMD LEDs
  • 80+ CRI rating ensures vibrant, natural-looking color tones
  • 18 LEDs/ft
  • 12V input for operation with a vehicle; 24V for longer runs
  • Run 12V strips up to 5m; run 24V strips up to 12.5m
  • Strip width measures 8mm
  • Lifetime exceeds 50000 hours
  • CE certified and UL listed
  • Lifetime warranty
UL Listed
UL Listed
CE
CE
Lifetime
Lifetime
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Sign Lighting
  • LED Backlights
  • Task Lighting
  • Accent Lighting
  • Off Grid Lighting
  • Retail
  • Coves
  • Under-Cabinets
  • Bias Lighting
  • Display Cases
  • Trade Shows
  • TV backlighting
  • Automotive Accent Lighting

Specifications

Ambient Operating Temperature -20~+45 °C (-4~+113 °F)
Certifications/Compliance CE, UL Listed
Dimmable Yes
Efficacy 82 lm/W
Environmental Rating Suitable for Wet Locations, Weatherproof
Finish White
IP Rating IP64
LED Beam Angle 120°
LED Density 18 LEDs/ft
LED Type 3528 SMD
Length 16.4ft (5m)
Power Consumption 23 Watts
Rated Life (L70) 50000 Hours
Series Eco
Strip Width 8mm (0.31in)
Wattage per Foot 1.4 W/ft (4.7 W/m)
Print Specifications
Swipe left to see additional specifications
Part NO Color Temperature Current Draw Current Draw per Foot LEDs per Segment Max Run (Class 2) Minimum Cut Length Operating Voltage Wire Length
STW-BAMB-B3C-08B5M-12V Amber 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BAMB-B6C-08B5M-24V Amber 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BBLU-B3C-08B5M-12V Blue 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BBLU-B6C-08B5M-24V Blue 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BGRE-B3C-08B5M-12V Green 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BGRE-B6C-08B5M-24V Green 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BPIN-B3C-08B5M-12V Pink 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BPIN-B6C-08B5M-24V Pink 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BRED-B3C-08B5M-12V Red 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BRED-B6C-08B5M-24V Red 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BULV-B3C-08B5M-12V UV (Blacklight) 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BULV-B6C-08B5M-24V UV (Blacklight) 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)
STW-BYEL-B3C-08B5M-12V Yellow 1.9 A 116mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC 483mm (19in)
STW-BYEL-B6C-08B5M-24V Yellow 950 mA 58mA 6 Up to 41ft (12.5m) 100mm (3.9in) 24 VDC 508mm (20in)

All specifications are subject to change without notice. All products are RoHS compliant.

Documents
EC-IP54-Color-5m Specification Sheet

Accessories & Power Supplies

All Accessories
Channels
Controllers
12V Power Supplies
Connectors
Remotes
Installation Supplies
24V Power Supplies

Accessories Links

Accessory Category
  1. GIZA aluminum channels with flat lenses

    $16.99 ea.
    GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
    In stock
    The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
  2. PDS-NK LED aluminum strip channel - flush mount - 13mm

    $15.99 ea.
    PDS-NK Aluminum Channel - Recessed - For Strips Up To 14mm - 1m / 2m Part Number: C1588
    In stock
    The KLUS® PDS-NK aluminum channel is a recessed profile housing for LED strip lights up to 14mm wide with a small exposed bezel for an appealing look. The recessed design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with an optional clear or frosted lens. Choose silver anodized, black, or white in 3.3ft (1m) or 6.6ft (2m) lengths.
  3. Corner mount silver PAC-ALU aluminum channel

    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - 1m / 2m Part Number: B4370ANODA
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  4. Silver and black MICRO-HG aluminum channel with optional frosted lenses

    $42.99 ea.
    MICRO-HG Aluminum Channel - Surface - For Strips Up To 11mm - 2m Part Number: C1419
    In stock
    KLUS® designed their MICRO-HG Aluminum Channel to minimize glare for optimal visual comfort with LED strip lights up to 11mm wide. Use with an optional lens, clear for greater efficiency and optimal brightness, or frosted for diffused lighting. Available in 6.6 ft (2m) length in anodized silver or black.
  5. KLUS TRIADA aluminum channel

    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - 1m / 2m Part Number: B4476ANODA
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  6. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  7. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  8. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  9. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  10. Silver and white GIZA-LL aluminum channels with optional frosted lenses

    $61.99 ea.
    GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 2m Part Number: C0758
    In stock
    The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for line-of-light illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach a waterproof rating for wet area use when installed with a cover, end caps, and neutral silicone sealant.
  11. MICRO-NK silver anodized aluminum LED strip channel - low profile flush mount with bezel

    $13.99 ea.
    MICRO-NK Aluminum Channel - Recessed - For Strips Up To 11mm - 1m / 2m Part Number: C1587
    In stock
    The KLUS® MICRO-NK aluminum channel is a low-profile (6mm height) recessed extrusion for LED strip lights up to 11mm wide with an exposed bezel for an appealing presentation. KLUS designed this recessed extruded aluminum channel to reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths, silver anodized or black, with an optional clear or frosted lens.
  12. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver.

  13. View all

    All Accessories

    96 additional compatible accessories

    View All Compatible Accessories
  1. GIZA aluminum channels with flat lenses

    $16.99 ea.
    GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
    In stock
    The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
  2. PDS-NK LED aluminum strip channel - flush mount - 13mm

    $15.99 ea.
    PDS-NK Aluminum Channel - Recessed - For Strips Up To 14mm - 1m / 2m Part Number: C1588
    In stock
    The KLUS® PDS-NK aluminum channel is a recessed profile housing for LED strip lights up to 14mm wide with a small exposed bezel for an appealing look. The recessed design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with an optional clear or frosted lens. Choose silver anodized, black, or white in 3.3ft (1m) or 6.6ft (2m) lengths.
  3. Corner mount silver PAC-ALU aluminum channel

    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - 1m / 2m Part Number: B4370ANODA
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  4. Silver and black MICRO-HG aluminum channel with optional frosted lenses

    $42.99 ea.
    MICRO-HG Aluminum Channel - Surface - For Strips Up To 11mm - 2m Part Number: C1419
    In stock
    KLUS® designed their MICRO-HG Aluminum Channel to minimize glare for optimal visual comfort with LED strip lights up to 11mm wide. Use with an optional lens, clear for greater efficiency and optimal brightness, or frosted for diffused lighting. Available in 6.6 ft (2m) length in anodized silver or black.
  5. KLUS TRIADA aluminum channel

    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - 1m / 2m Part Number: B4476ANODA
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  6. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  7. Silver and white GIZA-LL aluminum channels with optional frosted lenses

    $61.99 ea.
    GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 2m Part Number: C0758
    In stock
    The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for line-of-light illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach a waterproof rating for wet area use when installed with a cover, end caps, and neutral silicone sealant.
  8. MICRO-NK silver anodized aluminum LED strip channel - low profile flush mount with bezel

    $13.99 ea.
    MICRO-NK Aluminum Channel - Recessed - For Strips Up To 11mm - 1m / 2m Part Number: C1587
    In stock
    The KLUS® MICRO-NK aluminum channel is a low-profile (6mm height) recessed extrusion for LED strip lights up to 11mm wide with an exposed bezel for an appealing presentation. KLUS designed this recessed extruded aluminum channel to reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths, silver anodized or black, with an optional clear or frosted lens.
  9. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver.
  10. TAMI aluminum channels with frosted lenses

    $9.99 ea.
    TAMI Aluminum Channel - Surface - For Strips Up To 12mm - Silver - 1m / 2m Part Number: B5390ANODA-Frosted Cover
    In stock
    The KLUS® TAMI aluminum channel offers a professional mounting solution for surface mounting LED strip lights up to 12mm wide. The low-profile (7mm deep) extruded aluminum channel can reach a waterproof rating for wet areas when sealed. The included frosted lens provides smooth lighting with less visible hot spots. Available in anodized or non-anodized silver in lengths of 3.3ft (1m) or 6.6ft (2m).
  11. 1m silver PAC-ALU aluminum channel
    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - Silver - 1m Part Number: B4370ANODA_1
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. - Silver - 1m
  12. 1m adjustable KLUS REGULOR aluminum channel
    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - Silver - 1m Part Number: B468+43ANODA_1
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. - Silver - 1m

  13. View all

    Channels

    20 additional compatible accessories

    View All Compatible "Channels " Accessories
  1. 4 Channel DMX512 Decoder - 12-24 VDC - 4 A/CH - Address Digital Display
    $24.99 ea.
    4 Channel DMX512 Decoder - 12-24 VDC - 4 A/CH - Address Digital Display Part Number: DMX4-4CH-4A
    In stock

    The 4-channel LED DMX Decoder translates DMX512 signals to single-color, tunable white, RGB, or RGBW LED strip lights and fixtures. It can control up to 4 separate constant voltage single-color LED products or one a single RGBW light bar or flexible strip light. Decoder can run in standalone mode using the digital display or under DMX512 digital control signals using an RJ45 or XLR3 input/output interface. Connect up to 4 amps per channel, 16 amps total for the decoder. Control a maximum load of 192W for 12 VDC or 384W for 24 VDC. Includes one male and one female XLR3 connector.

  2. MiBoxer 2-in-1 Wireless LED Strip Controller - Single-Color / Tunable White LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC
    $24.99 ea.
    MiBoxer 2-in-1 Wireless LED Strip Controller - Single-Color / Tunable White LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC Part Number: FUT035W-V2
    In stock
    Control a single-color CCT or tunable white CCT LED strip light from anywhere using the MiBoxer LED Controller. Download the Smart Life app onto any compatible smart device to control the brightness, set a timer, and create a scene or an automation like a before-bed routine or a gradual wake-up plan. Use the ‘music rhythm’ setting to control your lights with music or use the “Biorhythm” setting to set your lighting to according to the sun. With tunable white LED tape lights, you can also control the color temperature. Operate multiple controllers simultaneously using the group control feature. For hands-free operation, connect to an Amazon Alexa or Google Assistant. No Wi-Fi hub is required for use. Also compatible with an optional remote control.
  3. MCBRF-4A Single Color LED Mini Dimmer with Dynamic Modes - RF Remote: Shown Connected To LED Strip And Power Supply (Sold Separately).
    $9.99 / set
    Single Color LED Controller with Dynamic Modes - RF Remote - Mini Single Color LED Controller Part Number: MCBRF-4A
    In stock
    Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included.
  4. LDK-8A 12~24 Volt DC Single Color LED Dimmer
    $9.99 ea.
    LDK-8A 12~24 Volt DC Single Color LED Dimmer - Single Color LED Dimmer Part Number: LDK-8A
    In stock

    Our LDK-8A is a universal single-color LED dimmer switch that can dim most 12V DC or 24V DC LED products from 0%-100% using a Pulse Width Modulation (PWM) circuit knob control. The plastic housing has screw terminals for power in and out connections with a maximum load of 8 Amps.

  5. LED Dual Slide Switch and Dimmer for Standard Wall Switch Box
    $32.99 ea.
    12-24V LED Dual Slide Switch and Dimmer for Standard Wall Switch Box - 120W Max Part Number: DLVDW-120W
    In stock

    LED dual slide switch and dimmer combo designed to fit in standard wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.

  6. Single Color LED Controller - Wireless RF Remote w/ Dynamic Modes
    $24.99 ea.
    Single Color LED Controller - Wireless RF Remote with Dynamic Modes - Mini Single Color LED Controller Part Number: MCBRF-15A
    In stock
    This LED controller with wireless RF remote is perfect for operating your single-color LED light strips. Choose from 8 dynamic light modes with adjustable speed and brightness levels, and control your light strip from up to 50-feet away in open air. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The waterproof remote has a maximum load capacity of 15 amps and is compatible with LED light strips that operate with in a 5-24V DC range. Wire leads connect to your light strip. Pair up to 3 remotes with the controller. Includes remote battery.
  7. SLVD-60W - LED Dimmer for Standard Wall Switch Box

    $22.99 ea.
    LED Switch and Dimmer for Standard Wall Switch Box - 60W Max Part Number: SLVDx-60W
    In stock
    LED switch and dimmer combo designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
  8. Wireless LED 1 Channel EZ Dimmer Controller
    $29.99 ea.
    Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8A
    In stock

    Designed for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.

  9. Wireless LED 4 Channel EZ Dimmer Controller w/ Channel Pairing
    $59.99 ea.
    Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8A
    In stock

    Designed for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.

  10. MLD-5A-CPS Single Color LED Mini Dimmer with Dynamic Modes - CPS
    $6.99 ea.
    Single Color LED Controller with Dynamic Modes - CPS - Mini LED Dimmer Part Number: MLD-5A-CPS
    In stock
    Universal single color mini LED dimmer and dynamic mode controller can dim any 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). Includes controller mounted push buttons for mode, speed and brightness adjustment. Features 8 dynamic flashing modes with adjustable speeds and power cycle mode retention. Maximum load is 5 Amps. Features 3.5" CPS power plug for easy plug and play installation. Price for each.
  11. MLD-5A 12 Volt DC Single Color LED Mini Dimmer with Dynamic Modes
    $6.99 ea.
    Single Color LED Controller with Dynamic Modes - Mini LED Dimmer Part Number: MLD-5A
    In stock
    Universal single color mini LED dimmer can dim any 5~24V DC LED product from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles
  12. LPIR-6A - Mini PIR Motion Sensor Switch
    $12.99 ea.
    Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6A
    In stock

    This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each.

  13. View all

    Controllers

    45 additional compatible accessories

    View All Compatible "Controllers" Accessories
  1. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  3. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  4. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock

    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.

  5. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  6. Mean Well LED Power Supply - LPV series 20W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  7. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  8. Magnitude Dimmable LED Power Supply

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-AR
    In stock

    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal NEMA 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.

  9. LED Switching Power Supply - DiodeDrive® Series - 150W Enclosed Power Supply - 12V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock

    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will withstand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.

  10. LED Switching Power Supply - DiodeDrive® Series - 240W Enclosed Power Supply - 12V

    $49.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock

    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to withstand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, without energy waste or risk of circuit overload.

  1. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  2. Solderless Clamp On LED Strip Light to Pigtail Adapter - 8mm Single Color Strips - 22-18 AWG
    $1.49 ea.
    Solderless Clamp On LED Strip Light to Pigtail Adapter - 8mm Single Color Strips - 22-18 AWG - STN8-2PC Part Number: STN8-2PC
    In stock
    Use this solderless adapter to connect your 8-mm single-color LED strip light to 22-18 gauge pigtail power wire. The clear connector easily clamps onto strip ends and pigtail wire with out stripping insulation. A secure-snap closure holds wire and strip in place.
  3. Solderless Clamp On Pigtail Adapter for 8mm Single Color LED Strip Lights - 6"
    $0.99 ea.
    Solderless Clamp On Pigtail Adapter for 8mm Single Color LED Strip Lights - 6 Part Number: STN8-2HCPT-15
    In stock
    Use this solderless pigtail adapter to connect your 8-mm single-color LED strip light to power. The adapter has 6" power wire and a secure-snap closure that holds the strip end securely in place.
  4. 6" Interconnect Jumper for 8mm Single Color LED Strip Lights
    $0.99 ea.
    6" Interconnect Jumper for 8mm Single Color LED Strip Lights - STN8-2HCHC-15 Part Number: STN8-2HCHC-15
    In stock
    Use this 6" interconnect jumper to join 8-mm single-color LED strip lights across gaps, cabinet lips, corners, and more. A secure-snap closure holds strip segments in place.
  5. Direct Connect Clamp for 8mm Single Color LED Strip Lights
    $0.59 ea.
    Direct Connect Clamp for 8mm Single Color LED Strip Lights - STN8-2HC Part Number: STN8-2HC
    In stock
    Use this direct-connect clamp to join 8-mm single-color LED strip lights. A secure-snap closure holds strip segments in place.
  1. Single Color Dimming LED RF Remote - Wireless Control
    $22.99 ea.
    Single Color Dimming LED RF Remote - Wireless Control - DS-DM Part Number: DS-DM
    In stock
    DS series RF Remote pairs with a compatible receiver to customize the brightness of single color LEDs.
  1. 3M Automotive Adhesion Promoter
    $4.99 ea.
    3M Adhesion Promoter - Single Pack Part Number: 06396
    In stock

    3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.

  2. 8mm Flat Power Wire for NFLS Flexible LED Light Strips
    $1.95 per Foot
    Flat Power Wire - 2 Conductor - 8mm - 8mm 1 Feet Part Number: NFLS8-FPW
    In stock
    This flat power cable is designed for creating discrete light installations with single-color LED strip lights. Easily hide it under paint, wallpaper, spackle, trim, and molding. The 2-conductor wire can be used for powering LED strip lights, connecting strip segments, and more. Easily secure this flat power cable to any surface with its adhesive backing, and forget about mounting wire clips. The power wire can carry 5 amps of current and has a max run of 10'. This power wire has a solder point every 12". Price per foot.
  1. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W

    $19.99 ea.
    Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-S
    In stock
    24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.
  3. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  4. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  5. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  6. Mean Well LED Switching Power Supply - LRS Series 100-350W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - LRS Series 100-350W Enclosed Power Supply - 24V DC Part Number: LRS-x-24
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. The 100W and 200W cool by air convection, and the 350W has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  7. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  8. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock

    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.

  9. Dimmable LED Driver - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V

    $39.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V Part Number: CVPSD-xWP-24V-JB
    In stock

    The DiodeDrive Constant Voltage LED Driver is a Class 2 power supply for indoor lighting systems compatible with TRIAC dimmers. It has two screw terminals and six conduit knockouts with easy wire access shielded within the durable, vented enclosure. Built-in features include a junction box and protection against overload, short-circuit, and over-temperature. Available with a maximum wattage of 25W or 60W. The optional 6ft power cord has a 5-15 plug.

  10. Mean Well LED Power Supply - LPV series 20W Single Output LED Power Supply - 24V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  11. Dimmable LED Driver - DiodeDrive® Series - 120W Enclosed Power Supply - 24V

    $99.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V Part Number: CVPSD-120WM-24V-JB-x
    In stock
    DiodeDrive Constant Voltage 120W LED Driver can effectively power strip lights, light bars, and more, up to 120-watts. This power supply has an integrated junction box, as well as short-circuit, overload, and over-temperature protection. It has 6 total knockouts, for easy powering access. Shielded in a durable, vented enclosure, the TRIAC dimmable device runs cool in both indoor and outdoor settings. Optional 6ft power cord has a 5-15 plug.
  12. Dimmable LED Driver - DiodeDrive® Series - 200W Enclosed Power Supply - 24V

    $129.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V Part Number: CVPSD-200WM-24V-JB-x
    In stock
    Effectively power tape lights, linear bars, and more with DiodeDrive Constant Voltage 200W LED Driver. Housed in a durable, vented enclosure, the black ETL power supply runs cool in both indoor and outdoor applications. Designed with a built in junction box, as well as short-circuit, overload, and over-temperature protection. with 7 knockouts and easy wiring access, this TRIAC dimmable device has compact utility for residential and commercial use. Optional 6ft power cord has a 5-15 plug.

  13. View all

    24V Power Supplies

    13 additional compatible accessories

    View All Compatible "24V Power Supplies " Accessories

Reviews

4.4 / 5 stars
22 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m Single Color Weatherproof LED Strip Light - Eco Series Tape Light - IP64 - 12V / 24V

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.