LED Fog Light Kit for Jeep Wrangler JK/JL and Gladiator JT - 4,000 Lumens - Fog / Driving Beam
Part Number:
SL3-JL-x-W-KIT
Manufacturer Part Number:
Starting at
$124.99
per Pair
Starting at
Was
Features
- LED Fog Light Kit for Jeep Wrangler JK/JL and Gladiator JT with plastic bumpers
- Jeep-specific design for no-drill installation
- SL3 SAE Series features DOT-compliant fog and driving beams
- Available in an 8º x 24º driving beam or a 6º x 36º fog beam
- Advanced TIR optics for smooth, uniform lighting
- Durable powder-coated steel brackets for no-drill install
- Heavy duty aluminum housing and polycarbonate lens
- Lifetime Warranty
Related Products
Overview
Use this LED pod light kit to upgrade your Jeep Wrangler or Gladiators fog lights. Fits your Jeep Wrangler JK (2007-2017) , Jeep Wrangler JL (2018+) or Jeep Gladiator (2020+) with factory front bumpers. For fitment, see the vehicle compatibility information below. Replace or upgrade your existing fog lights with durable 3” LED pod lights for various off-road lighting applications. Built to withstand rugged outdoor conditions, the pod lights are IP67 waterproof rated with an aluminum housing and a polycarbonate lens. Advanced TIR optics maximize the illumination while creating a smooth, uniform light beam. The DOT-compliant 8º x 24º driving beam pattern is ideal for long-range lighting with wide area coverage. The DOT-compliant 6º x 36º fog beam pattern works for close-range front and side area coverage. See our SL3 Series for individual round LED pod lights.
What's Inside:
- Two (2) 3-inch round LED pod lights
- Two (2) steel mounting brackets with stainless steel mounting hardware for Jeep JK / JL / JT
- Two (2) Deutsch DT 2-Pin to 2504 / 5202 adapter wiring harnesses
Info Center
News, Tips, Tutorials
Beam Patterns for Off-Road Lights
In order to choose a light with the proper beam pattern for your...
How Do LED Infrared Lights Work?
Infrared (IR) LED light emits light not visible to the naked human eye...
How to Install a Light Bar
If you’re dying to install your new LED light bar but aren’t sure how, we can walk you through the process...
Installing a Combination Beam LED Light Bar
A step by step guide for easy installation of the Combination Beam LED Light Bar.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
|---|---|
| Brand | Super Bright LEDs |
| Color Temperature | 6500K |
|
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
3.4 A @ 12 VDC |
|
Environmental Rating
Environmental Rating
|
Waterproof |
| Finish | Black |
| Input Voltage | 12-36 VDC |
|
IP Rating
IP Rating
|
IP67 |
| LED Color | White |
| Lumens | 4000 Lumens |
| Rows Of LEDs | Dual |
| Series | SL3 Series |
| Warranty | Lifetime |
| Wattage | 40 Watts |
| Part NO |
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
Beam Pattern
Beam Pattern
Spot Lights
Spot lights give off a narrow and concentrated beam of light that allows for greater visibility at further distances. With light output stretching beyond that of standard headlights. Spot lights are best used to navigate dark back roads for everything from recreational vehicles to work trucks and search and rescue vehicles. Flood Lights Flood lights are best at illuminating a wider area at a shorter distance than typical headlights. These are great for use on vehicles performing tasks at night such as roadwork or harvesting, as well as use on curvy roads and side roads. Combo Beams
Combo vehicle lights are a combination of a spot light and a flood light that are always on simultaneously. This allows for the light to cover both short and long distances at the same time for a variety of tasks. Selectable Multibeams
Selectable multibeams contain both a spot light and a flood light. With this, you gain the ability to have either the spot light or the flood light, or both on at the same time. Selectable multi-beams are extremely versatile in that you get three beam patterns in a single light. However it does require additional wiring to operate both beams independently through either multiple rocker switches, or a momentary switch. Combo + Side Shooters
Side shooters illuminate a full 180 degrees or more through the use of a combo beam vehicle light. Side shooters contain an extra row of vertically or horizontally stacked and angled LED lights. This row is what gives the side shooter the ability to expand beyond a normal flood light's field of view. Side shooters are best used while stationary or at very low speeds where the field of view is critical. |
|---|---|---|
| SL3-JL-DL-W-KIT | 6° x 36° | Driving |
| SL3-JL-FOG-W-KIT | 8° x 24° | Fog |
Compatibility:
Brackets are compatible with original factory and aftermarket bumpers with 4-bolt mounting style fog lights. When determining the fitment, check that your existing lights use the 4-bolt style mounting flange before ordering. This kit will not replace 3-bolt and 2-bolt style fog lights.
2007–2018 Jeep Wrangler (JK)
- 2007–2009 with factory fog lamp option, except X trim
- 2010 with factory fog lamp option, except Sport trim
- 2011–2012, except Sport trim
- 2013 except Sport, 10th Anniversary Rubicon, and Moab trims
- 2014, except Sport and Rubicon X trims
- 2015–2016, except Sport and Rubicon Hard Rock trims
- 2017 with LED Lighting Group except for Rubicon Hard Rock trim
- 2018 with LED Lighting Group, except Freedom Edition, Golden Eagle, and Rubicon Recon trims
2018–2023 Jeep Wrangler (JL)
- 2018 with LED Lighting Group except for Rubicon trim with Steel Bumper Group option
- 2019 with LED Lighting Group except Moab trim and Rubicon trim with Steel Bumper Group option
- 2020 with LED Lighting Group except for Rubicon with Steel Bumper Group option
- 2021 with LED Lighting Group except Rubicon (including 4xE) trim with Steel Bumper Group option
- 2022–2023 with LED Lighting Group except 392 trim and Rubicon (including 4xE) trim with Steel Bumper Group option
2020–2023 Jeep Gladiator (JT)
- 2020, except Sport trim and Rubicon trim with Steel Front Bumper or Launch Edition options
- 2021–2022 with LED Lighting Group except for Rubicon trim with Steel Bumper Group option
- 2023 with LED Lighting Group except for High Altitude with Capability Package option and Rubicon with Steel Front Bumper option
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
