Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Back
Waterproof LED Light Bar - 3'3" Super Flexible LED Bar with 30 SMDs/ft. - 5-mm Through Hole LED - 269 Lumens

Outdoor Single-Color LED Strip Light - Super Flexible with Through Hole LEDs - 12V - Waterproof IP67 - 85 Lumens/ft

Part Number
WFLB-x96

Features

  • Waterproof for outdoor use
  • 12 VDC
  • Side emitting & conforms to most shapes
  • Can be cut every 1"
  • 5-Year warranty
  • 0-100% Dimmable
View more details
In Stock

Starting at $22.99 ea.
Add to Wish List Compare

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Share:
main product photo
14 photos

Overview

This super-flexible, waterproof LED strip light operates on 12 VDC. Using 5-mm through hole LEDs, it emits up to 85 lumens of cool white, warm white, UV (blacklight), blue, green, yellow, orange, or red illumination per foot. The 3.2' side-emitting LED light strip is completely encapsulated in rubber, can be easily cut into separate 3-LED segments, and will conform to most shapes up to a 0.25" radius. Each strip has a 20" power wire on both ends for connecting multiple units together. It will appear at full brightness for 10,000 hours. After 10,000 hours of use, a decline in lumen output might be noticeable. This LED strip light is great for landscape lighting, vehicles, boats, marine lighting, and many more indoor or outdoor applications.
5 Years
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Walkway
  • LED Stair Lights
  • Accent Lighting
  • Off Grid Lighting
  • Outdoor Accent Lights
  • Automotive Accent Lighting
  • Bias Lighting
  • LED Boat Lights
  • RV LED Lighting
  • Trade Shows
  • Marine LED Lighting

Specifications

Current Draw per Foot 203mA
Dimmable Yes
Finish Copper
IP Rating IP67
LED Beam Angle 80°
LED Type 5mm
LEDs per Segment 3
Length 3.3ft (1m)
Max Run (Class 2) Up to 9.5ft (2.9m)
Minimum Cut Length 30mm (1.2in)
Operating Voltage 9~14.8 VDC
Power Consumption 7.7 Watts
Rated Life (L70) 10000 Hours
Wattage per Foot 2.5 Watts
Wire Length 20in(50.8cm)
Print Specifications
Swipe left to see additional specifications
Part NO Brightness CCT Value Color Temperature Current Draw
WFLB-B96 85 lm/ft (280 lm/m) Blue 0.46A (460mA)
WFLB-CW96 85 lm/ft (280 lm/m) 6500K Cool 6500K 0.43A (430mA)
WFLB-G96 85 lm/ft (280 lm/m) Green 0.64A (640mA)
WFLB-O96 85 lm/ft (280 lm/m) Orange 0.64A (640mA)
WFLB-R96 85 lm/ft (280 lm/m) Red 0.53A (530mA)
WFLB-UV96 85 lm/ft (280 lm/m) UV (Blacklight) 0.64A (640mA)
WFLB-WW96 83 lm/ft 2700K Warm 2700K 0.43A (430mA)
WFLB-Y96 85 lm/ft (280 lm/m) Yellow 0.64A (640mA)
All specifications are subject to change without notice.

Accessories & Power Supplies

All Accessories
Controllers
Power Supplies
Installation Supplies
Connectors
Mounting

Accessories Links

Accessory Category
  1. DS-CO4Waterproof 4 Channel Receiver with RF Remote - 4 Amps/Channel
    $69.99 ea.
    Waterproof 4 Channel Receiver - 5 Amps/Channel - DS-CO4 Part Number: DS-CO4
    In stock
    DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remotes to customize the operation of LED lighting.
  2. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  3. MiBoxer LED Controller - RGB+CCT Light Strip - 6 Amps / Channel - 12-24 VDC
    $15.99 ea.
    MiBoxer LED Controller - RGB+CCT Light Strip - 6 Amps / Channel - 12-24 VDC Part Number: FUT039
    In stock

    Use the LED controller to adjust the settings of RGB+CCT LED strip lights. The controller has a 30m communication range with a synchronization function that allows multiple controllers to be controlled simultaneously. Control multiple lighting zones on one controller using a compatible remote control or using the MiBoxer app on your smartphone. For smartphone control, the controller must be paired with Wi-Fi LED Controller Hub. Compatible remote controls and Wi-Fi controllers are sold separately.

  4. Wireless Single Color LED Dimmer Remote w/ Magnetic Remote Dock for EZ Dimmer Controller
    $19.99 ea.
    Wireless Single Color LED Dimmer Remote with Magnetic Remote Dock for EZ Dimmer Controller - EZD-1C5 Part Number: EZD-1C5
    In stock
    Designed for use with in the EZ Dimmer series, this wireless LED dimmer remote features a magnetic remove dock and provides on/off control, 5 zone control, dim/brighten capability, and matching controls for all zones at once. The dimmer transmits an RF signal to the wireless receiver from up to 65ft away in open air.
  5. Magnitude Dimmable LED Driver - Super Compact - 12 Volt

    $109.99 ea.
    Magnitude Dimmable LED Driver - Super Compact - 12 Volt Part Number: ExR12DC
    In stock
    The Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  6. MiBoxer 5-in-1 Waterproof LED Controller - RGB+CCT - IP67 - 6 Amps/Channel - 12-24 VDC
    $59.99 ea.
    MiBoxer 5-in-1 Waterproof LED Controller - RGB+CCT - IP67 - 6 Amps/Channel - 12-24 VDC Part Number: WL5-WP
    In stock

    Easily control an indoor or outdoor LED strip light using an RF remote or a 2.4 GHz Wi-Fi connection. The waterproof IP67 controller is constructed with a PC plastic shell and reinforced strain relief to protect the internal elements from water intrusion. The controller has a 30m communication range with a synchronization function that allows multiple controllers to be controlled simultaneously. Group multiple controllers together to expand the communication range with the auto-transmitting function. Control individual lighting zones on one controller using a compatible remote control or using the MiBoxer app on your smartphone. For smartphone control or to use the controller with Alexa or Google Assistant, the controller must be paired with Wi-Fi LED Controller Hub. Compatible remote controls and Wi-Fi controllers are sold separately.

  7. LPIR-6A - Mini PIR Motion Sensor Switch
    $12.99 ea.
    Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6A
    Out of stock
    This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is with in 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates with in a 12-24 VDC range. Price for each.
  8. LVDx-60W LED Dimmer for Standard Wall Switch Box

    $14.99 ea.
    LVDx-60W LED Dimmer for Standard Wall Switch Box Part Number: LVDx-60W
    In stock
    LED dimmer designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
  9. MLD-5A 12 Volt DC Single Color LED Mini Dimmer with Dynamic Modes
    $6.99 ea.
    Single Color LED Controller with Dynamic Modes - Mini LED Dimmer Part Number: MLD-5A
    In stock
    Universal single color mini LED dimmer can dim any 5~24V DC LED product from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles
  10. Magnitude Dimmable LED Driver - 20-40W - 12 Volt DC

    $64.99 ea.
    Magnitude Dimmable LED Driver - 20-40W - 12 Volt DC Part Number: SLTLxL12DC
    In stock
    The compact Magnitude dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of either 20 or 40 watts. The 12-volt driver is encased in a durable, low-profile plastic enclosure that allows easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Includes auto reset, over-current, and short-circuit protection as well as 2 entry points to screw terminals for easy wire access. Efficiency of 82% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  11. CPS-PT Pigtail CPS Power Adapter Cable
    $1.49 ea.
    CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PT
    In stock
    Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
  12. WFLB-x96-MB-K Mounting Clips w/screws

    $0.15 ea.

    Mounting Clips for 38" Waterproof Flexible Light Bar - Mounting Clips with screws Part Number: WFLB-x96-MB-K
    In stock
    Plastic mounting clip for the WFLB series flexible light bars. Attach using 0.093 in. diameter screw holes and included screws or foam tape. Includes 2 screws per clip.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. DS-CO4Waterproof 4 Channel Receiver with RF Remote - 4 Amps/Channel
    $69.99 ea.
    Waterproof 4 Channel Receiver - 5 Amps/Channel - DS-CO4 Part Number: DS-CO4
    In stock
    DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remotes to customize the operation of LED lighting.
  2. MiBoxer LED Controller - RGB+CCT Light Strip - 6 Amps / Channel - 12-24 VDC
    $15.99 ea.
    MiBoxer LED Controller - RGB+CCT Light Strip - 6 Amps / Channel - 12-24 VDC Part Number: FUT039
    In stock

    Use the LED controller to adjust the settings of RGB+CCT LED strip lights. The controller has a 30m communication range with a synchronization function that allows multiple controllers to be controlled simultaneously. Control multiple lighting zones on one controller using a compatible remote control or using the MiBoxer app on your smartphone. For smartphone control, the controller must be paired with Wi-Fi LED Controller Hub. Compatible remote controls and Wi-Fi controllers are sold separately.

  3. Wireless Single Color LED Dimmer Remote w/ Magnetic Remote Dock for EZ Dimmer Controller
    $19.99 ea.
    Wireless Single Color LED Dimmer Remote with Magnetic Remote Dock for EZ Dimmer Controller - EZD-1C5 Part Number: EZD-1C5
    In stock
    Designed for use with in the EZ Dimmer series, this wireless LED dimmer remote features a magnetic remove dock and provides on/off control, 5 zone control, dim/brighten capability, and matching controls for all zones at once. The dimmer transmits an RF signal to the wireless receiver from up to 65ft away in open air.
  4. MiBoxer 5-in-1 Waterproof LED Controller - RGB+CCT - IP67 - 6 Amps/Channel - 12-24 VDC
    $59.99 ea.
    MiBoxer 5-in-1 Waterproof LED Controller - RGB+CCT - IP67 - 6 Amps/Channel - 12-24 VDC Part Number: WL5-WP
    In stock

    Easily control an indoor or outdoor LED strip light using an RF remote or a 2.4 GHz Wi-Fi connection. The waterproof IP67 controller is constructed with a PC plastic shell and reinforced strain relief to protect the internal elements from water intrusion. The controller has a 30m communication range with a synchronization function that allows multiple controllers to be controlled simultaneously. Group multiple controllers together to expand the communication range with the auto-transmitting function. Control individual lighting zones on one controller using a compatible remote control or using the MiBoxer app on your smartphone. For smartphone control or to use the controller with Alexa or Google Assistant, the controller must be paired with Wi-Fi LED Controller Hub. Compatible remote controls and Wi-Fi controllers are sold separately.

  5. LPIR-6A - Mini PIR Motion Sensor Switch
    $12.99 ea.
    Mini PIR Motion Sensor Switch with Built In Timer - 12-24 VDC - 6 Amps - Mini PIR switch Part Number: LPIR-6A
    Out of stock
    This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is with in 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates with in a 12-24 VDC range. Price for each.
  6. LVDx-60W LED Dimmer for Standard Wall Switch Box

    $14.99 ea.
    LVDx-60W LED Dimmer for Standard Wall Switch Box Part Number: LVDx-60W
    In stock
    LED dimmer designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
  7. MLD-5A 12 Volt DC Single Color LED Mini Dimmer with Dynamic Modes
    $6.99 ea.
    Single Color LED Controller with Dynamic Modes - Mini LED Dimmer Part Number: MLD-5A
    In stock
    Universal single color mini LED dimmer can dim any 5~24V DC LED product from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles
  8. LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC with included Male and Female XLR3 connectors
    $19.99 ea.
    LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX4-3CH-8A
    In stock
    The DMX512 decoder can control up to 3 different constant voltage LED products or any one RGB light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 or XLR3 input/output interface. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector.
  9. LED DMX512 Decoder - 4 Channel - 5 Amp - 12-24V - Digital Display
    $45.99 ea.
    4 Channel LED DMX512 Decoder - 5A/CH - 12-24V - Digital Display - 60-120W - DS-DMX45 Part Number: DS-DMX45
    In stock
    DS series 4 Channel DMX Decoder allows up to 4 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 4 channels, it allows a max of 5A and 120W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
  10. MiBoxer LED Dimmer - Wireless Single-Color LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC
    $23.99 ea.
    MiBoxer LED Dimmer - Wireless Single-Color LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC Part Number: FUT036W
    In stock

    Control a single-white LED strip light from anywhere using a smartphone or tablet to access the customization settings and functions. Use the app to select between the pre-programmed modes, adjust the brightness, and use the timer function. For hands-free operation, connect to an Alexa or Google Assistant. The controller is also compatible with Bluetooth control and optional remote control.

  11. Single Color LED Dimmer - Wireless RF Remote - 8 Amps
    $12.99 / set
    Single Color LED Dimmer - Wireless RF Remote - 8 Amps - LED Dimmer with RF Remote Part Number: LDBRF-8A
    In stock
    This LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate with in a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery.
  12. LDP-2A 12 Volt DC Single Color LED Dimmer

    $7.99 ea.
    LDP-2A 12 Volt DC Single Color LED Dimmer Part Number: LDP-2A-C
    In stock
    Universal single color LED dimmer can dim any 12VDC LED products from 0 to 100% using Pulse Width Modulation (PWM) circuit knob control. Has male and female 5.5mm barrel power connector for connecting in-line with our CPS series power supplies. Maximum load is 2 amps. Available with black or white finish.

  13. View all

    Controllers

    55 additional compatible accessories

    View All Compatible "Controllers" Accessories
  1. Magnitude Dimmable LED Driver - Super Compact - 12 Volt

    $109.99 ea.
    Magnitude Dimmable LED Driver - Super Compact - 12 Volt Part Number: ExR12DC
    In stock
    The Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  2. Magnitude Dimmable LED Driver - 20-40W - 12 Volt DC

    $64.99 ea.
    Magnitude Dimmable LED Driver - 20-40W - 12 Volt DC Part Number: SLTLxL12DC
    In stock
    The compact Magnitude dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of either 20 or 40 watts. The 12-volt driver is encased in a durable, low-profile plastic enclosure that allows easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Includes auto reset, over-current, and short-circuit protection as well as 2 entry points to screw terminals for easy wire access. Efficiency of 82% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  3. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  4. Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 12V Dimmable

    $35.99 ea.
    Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 12V Dimmable Part Number: PWM-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  5. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive® provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  6. Magnitude Dimmable LED Driver - Compact - 12 Volt

    $114.99 ea.
    Magnitude Dimmable LED Driver - Compact - 12 Volt Part Number: ExL12DC
    In stock
    The compact Magnitude dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Includes 2 knock-outs for easy wire access as well as auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  7. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $29.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. 12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply
    $3.99 ea.
    12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-D
    In stock
    Use this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders.
  9. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $31.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive® Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  10. Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC

    $99.99 ea.
    Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC Part Number: KVP-12120-TDL
    In stock
    This enclosed dimmable LED driver/power supply has a maximum load of 120 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The sealed driver allows for indoor or outdoor use. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers.
  11. Magnitude Dimmable LED Power Supply

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  12. 12V DC Battery Power Supply - 8-Cell AA Battery Holder

    $1.99 ea.
    12V DC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDC
    In stock

    Use these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a slim style with mounting holes, compact double-sided style, wide double-sided style, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see D-cell holder.

  13. View all

    Power Supplies

    23 additional compatible accessories

    View All Compatible "Power Supplies" Accessories
  1. 3M Automotive Adhesion Promoter
    $4.99 ea.
    3M Adhesion Promoter - Single Pack Part Number: 06396
    In stock
    3M Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. 3M Adhesion Promoter 06396 is specifically formulated for automotive applications. It comes in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Apply promoter only to areas that will be fully covered with tape. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primed surfaces remain free from contaminants prior to tape application.
  1. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  2. CPS-PT Pigtail CPS Power Adapter Cable
    $1.49 ea.
    CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PT
    In stock
    Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
  1. WFLB-x96-MB-K Mounting Clips w/screws

    $0.15 ea.

    Mounting Clips for 38" Waterproof Flexible Light Bar - Mounting Clips with screws Part Number: WFLB-x96-MB-K
    In stock
    Plastic mounting clip for the WFLB series flexible light bars. Attach using 0.093 in. diameter screw holes and included screws or foam tape. Includes 2 screws per clip.

Reviews

Write Your Own Review

Write a Review

You're reviewing: Outdoor Single-Color LED Strip Light - Super Flexible with Through Hole LEDs - 12V - Waterproof IP67 - 85 Lumens/ft

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs