MICRO-ALU LED strip channel - surface / flush mount - 11mm

MICRO-ALU LED Strip Channel - Surface / Flush Mount - 11mm

Part Number
B1888

Features

  • Low-profile surface or flush mount
  • Compatible with optional lenses
  • Accommodates LED strips up to 11mm wide
  • Able to reach an IP67 waterproof rating
  • 4-year warranty
View more details
In Stock

$9.99 ea.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Overview

The KLUS® MICRO-ALU Series LED strip channel offers a professional mounting solution for surface or flush mounting LED strip lights up to 11mm wide. Made from extruded aluminum, the low-profile 6mm deep channel can reach a waterproof rating for wet areas when installed with a cover, end caps, and neutral silicone sealant (see accessories). Available in 1m or 2m lengths, in silver, black, or white anodized aluminum and non-anodized silver. Use a clear lens for optimal brightness or a frosted lens for smooth lighting with less visible hot spots. See similar TAMI LED Strip Channel - Universal or premade LED Linear Light Bar Fixture.

See our selection of LED strip lights

Product Details:
  • Extruded Aluminum
  • Mount with 3M-FTS Double-Sided tape or brackets (see accessories)
  • Able to reach a waterproof rating
  • 4-year warranty
4 Years
4 Years
Super Bright LEDs, Inc. offers a 4-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Cabinets
  • Display Lighting
  • Kitchen Lighting
  • Windows
  • Task Lighting
  • Bookshelf Lighting
  • Under-Cabinets
  • Commercial Kitchen Lighting
  • Gardens
  • Bathroom Lighting

Specifications

Brand Klus
Mount Type Surface
Strip Width 11mm (0.43in)
Print Specifications
Swipe left to see additional specifications
Part NO Finish Length Lens Material Shipping Exclusions and Details
B1888ANODA_1 Silver Anodized 3.3ft (1m) Not Included Aluminum
B1888ANODA_1-C Silver Anodized 3.3ft (1m) Clear Aluminum
B1888ANODA_1-F Silver Anodized 3.3ft (1m) Frosted Aluminum
B1888ANODA_2 Silver Anodized 6.6ft (2m) Not Included Aluminum Excessive Length
B1888ANODA_2-C Silver Anodized 6.6ft (2m) Clear Aluminum Excessive Length
B1888ANODA_2-F Silver Anodized 6.6ft (2m) Frosted Aluminum Excessive Length
B1888K7_1 Black Anodized 3.3ft (1m) Not Included Aluminum
B1888K7_1-C Black Anodized 3.3ft (1m) Clear Aluminum
B1888K7_1-F Black Anodized 3.3ft (1m) Frosted Aluminum
B1888K7_2 Black Anodized 6.6ft (2m) Not Included Aluminum Excessive Length
B1888K7_2-C Black Anodized 6.6ft (2m) Clear Aluminum Excessive Length
B1888K7_2-F Black Anodized 6.6ft (2m) Frosted Aluminum Excessive Length
B1888L9010_1 White 3.3ft (1m) Not Included
B1888L9010_1-C White 3.3ft (1m) Clear
B1888L9010_1-F White 3.3ft (1m) Frosted
B1888L9010_2 White 6.6ft (2m) Not Included Excessive Length
B1888L9010_2-C White 6.6ft (2m) Clear Excessive Length
B1888L9010_2-F White 6.6ft (2m) Frosted Excessive Length
B1888NA_1 Silver Non-Anodized 3.3ft (1m) Not Included
B1888NA_1-C Silver Non-Anodized 3.3ft (1m) Clear
B1888NA_1-F Silver Non-Anodized 3.3ft (1m) Frosted
B1888NA_2 Silver Non-Anodized 6.6ft (2m) Not Included Excessive Length
B1888NA_2-C Silver Non-Anodized 6.6ft (2m) Clear Excessive Length
B1888NA_2-F Silver Non-Anodized 6.6ft (2m) Frosted Excessive Length
Product Characteristics
The extrusion made from high quality aluminum (also available in a double-anodized version) is designed for flexible or rigid LED strips that are 8 - 10mm wide. One of the accessories offered for the extrusion are covers that shade and protect LEDs inside the profile. There are few types of covers: cover K (frosted or transparent), HS (frosted or transparent) or clear focusing covers, which allow you to obtain a 60 degree light angle. Covers are made of polycarbonate. Standard polypropylene end caps, electricity -conductive end caps, and mounting brackets (made from steel, zinc or chrome finish) can be used for the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and consequently deteriorate the quality of their light output. The extrusion can be mounted to surfaces with the use of double sided adhesive tape or mounting brackets. The mounting bracket guarantees easy and secure mounting of the extrusion surface. They can also work as connector between two extrusions.
Applications
The extrusion with the LED light source is mostly used as interior lighting, especially to light cabinets, stairs, glass cases, or as a decoration light for a niche in drywall ceilings.
Product Dimensions
dimensions
Advantages
Small dimensions allow the profile to fit in a variety of locations such as housings interiors, exhibits, shelving units, and stair cases. They are lightweight, easily release heat, and environment friendly.

Accessories & Power Supplies

  1. Klus 1547 - LED Profile Lens, Standard Frosted

    $9.99 ea.
    KA-BIS Cover Frosted Part Number: 17064
    In stock
    Use this frosted LED channel lens to create a complete light bar fixture and diffuse light for less hot spots. It's compatible with KLUS MICRO-ALU LED channels. Choose 3.3' or 6.6' lengths.
  2. KA-BIS Cover Clear

    $9.99 ea.
    KA-BIS Cover Clear Part Number: 17065
    In stock
    Use this clear LED channel lens to create a complete light bar fixture and show full light output. Use it with KLUS MICRO-ALU LED channels. Choose 3.3' or 6.6' lengths.
  3. Mounting Clips for WFL Waterproof LED Light

    $0.99 ea.

    Mounting Clips for WFL Waterproof LED Light - Mounting Clips with screws Part Number: WLF-MC
    In stock
    Set of mounting clips with included screws for WLF series Waterproof Light Fixture. One set includes 2 clips and 2 screws.
  4. View all

    All Accessories

    1 additional compatible accessories

  1. Klus 1547 - LED Profile Lens, Standard Frosted

    $9.99 ea.
    KA-BIS Cover Frosted Part Number: 17064
    In stock
    Use this frosted LED channel lens to create a complete light bar fixture and diffuse light for less hot spots. It's compatible with KLUS MICRO-ALU LED channels. Choose 3.3' or 6.6' lengths.
  2. KA-BIS Cover Clear

    $9.99 ea.
    KA-BIS Cover Clear Part Number: 17065
    In stock
    Use this clear LED channel lens to create a complete light bar fixture and show full light output. Use it with KLUS MICRO-ALU LED channels. Choose 3.3' or 6.6' lengths.
  3. KA Cover Frosted

    $6.99 ea.
    KA Cover Frosted Part Number: 17035
    In stock
    Providing good light diffusion for KLUS® strip channels, the KA lens fits most standard sized extrusions. with frosted polycarbonate, LED strip illumination is smooth, for a line of light free of hot spots.
  4. LIGER Cover Black

    $16.99 ea.
    LIGER Cover Black Part Number: 17040
    In stock
    The unique surface of the matte black LIGER lens turns white when LED strip lights beneath turn on. Compatible with most standard KLUS® strip channels, the polycarbonate cover is UV-resistant and ideal for extrusions with a minimum of 11mm deep. Best for applications that do not require maximum lumen output, as it does decrease brightness.
  5. Deep Frosted Lens for KLUS MICRO-ALU LED Channels - KLUS 17038

    $12.99 ea.
    M-K Cover Frosted Part Number: 17038
    In stock
    Use this frosted LED channel lens to achieve a solid line of light with no hot spots. It's compatible with KLUS MICRO-ALU LED channels. Choose 3.3' or 6.6' lengths.
  6. LIGER Cover Frosted

    $11.99 ea.
    LIGER Cover Frosted Part Number: 17037
    In stock
    Universal LIGER lens is compatible with most standard KLUS® strip channels. The frosted polycarbonate cover diffuses light emitted by LED strips, eliminating hot spots and creating a uniform line of light.
  7. KA Cover Clear

    $6.99 ea.
    KA Cover Clear Part Number: 17036
    In stock
    Providing good light diffusion for KLUS® strip channels, the KA lens fits most standard sized extrusions. with clear polycarbonate, LED strip illumination is unfiltered, allowing a brighter distribution of light.
  1. Mounting Clips for WFL Waterproof LED Light

    $0.99 ea.

    Mounting Clips for WFL Waterproof LED Light - Mounting Clips with screws Part Number: WLF-MC
    In stock
    Set of mounting clips with included screws for WLF series Waterproof Light Fixture. One set includes 2 clips and 2 screws.

Reviews

4.6 / 5 stars
70 reviews

Write Your Own Review

Write a Review

You're reviewing: MICRO-ALU LED Strip Channel - Surface / Flush Mount - 11mm

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs