Linkable LED Under Cabinet Light Bar - Seamless Connection - 413 lm/ft


Features
- Slim design illuminates hard-to-see spaces
- Linkable up to 16’ in versatile configurations
- Change direction while maintaining continuous beam
- 410 lumens per foot
- 12VDC
Frequently Bought Together
Loading recommendations...
Overview
- Compatible with multiple connector options (sold seperately)
- Integrated back-mounted sliding magnets
- Included mounting clips
- Included 8" cord with barrel plug
- Dimmable with controller (sold seperately)
- Available in 4000K
- 12VDC
- 30000 hours L70 lifespan
- IP20 rated for dry conditions
- 3 year warranty
- Bookshelves
- Cove Lighting
- Displays
- Off Grid Lighting
- RV Lights
- Showcases
- Trade Shows
- Under-Cabinets
Specifications
Color Temperature
Color Temperature
![]() Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
4000K |
---|---|
CRI | 80+ |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
324mA |
Dimmable | Yes |
Environmental Rating
Environmental Rating
![]() |
Non-weatherproof, Suitable for Dry Locations |
Input Connection Type | 5.5 mm x 2.1 mm DC Barrel |
IP Rating
IP Rating
![]() |
IP20 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
![]() |
120° |
LED Color | Natural 4000K |
LED Type | 2835 SMD |
LEDs per Segment | 30 |
LED Lifetime | 30000 Hours |
Operating Voltage | 12 VDC |
Output Connection Type | LSLB |
Strip Width | 12.75mm (0.5in) |
Wattage per Foot | 4.3 W/ft |
Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Efficacy | Length | Lumens Per Foot | Wattage |
---|---|---|---|---|---|
LSLB-NW08-12V | 240 mA | 95 lm/W | 8 in. | 413 lm/ft | 2.9 Watts |
LSLB-NW12-12V | 360 mA | 95 lm/W | 12 in. (1 ft) | 410 lm/ft | 4.3 Watts |
LSLB-NW20 | 540 mA | 93 lm/W | 20 in. | 402 lm/ft | 7 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs