Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller - EZD-1C-WM
Part Number
EZD-1C-WM
Customers Also Viewed
Overview
Designed for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing, this single-color wireless LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer knob transmits an RF signal to the wireless receiver from up to 300' away in open air. The wall-mounted wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Battery Type | 1 x CR2032 |
|---|---|
| Channels | 1 Channel |
| Control Type | Handheld (RF) Remote |
| Radio Frequency | 868 MHz |
| Remote Range | Up to 98.4 ft (30 m) |
| Standards And Certifications | CE, FCC |
| Voltage | 3 VDC |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$29.99 ea.Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8AIn stockDesigned for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.
-
$59.99 ea.Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8AIn stockDesigned for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$29.99 ea.Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8AIn stock
Designed for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.
-
$59.99 ea.Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8AIn stock
Designed for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Reviews
4.5 / 5 stars
4 reviews
4.5 / 5 stars
4 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*