Name: 2016 Tunable White LED Strip Light/Tape Light - 24V - IP20 - 511 Lumens/ft - NFLS-VCTH1200
Brand: Super Bright LEDs
SKU: NFLS-VCTH1200
Price: 79.99 USD
Availability: InStock
Rating: 4.8 (8 reviews)

Overview

This tunable white LED strip light emits 511 lumens of powerful illumination per foot. Color temperature can be adjusted from 2700K to 6500K with a tunable white controller (sold separately). The 16.4' high-density LED strip light operates on 24 VDC and can be used in longer runs than 12V strips. Easily cut it into separate 12-LED segments and install it with its peel-and-stick 3M™ adhesive backing. This strip is designed to last 30,000 hours. It's great for cabinets, under-cabinet lighting, toe-kicks, coves, bookshelves, or other indoor applications where space is limited. The light strip must be used with a class 2 power supply.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

LED Backlights
Task Lighting
Accent Lighting
Off Grid Lighting
Retail
Coves
Under-Cabinets
Bias Lighting
Display Cases
Trade Shows

Specifications

Brightness	511 lm/ft
CCT Value	2700-6500K
Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	Tunable CCT
CRI	90+
Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	2.97A (2970mA)
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	181mA
Dimmable	Yes
Efficacy	118 lm/W
Environmental Rating Learn more about environmental rating	Non-weatherproof
Finish	White
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	73 LEDs/ft
LED Type	2016 SMD
LEDs per Segment	12
Length	16.4ft (5m)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Up to 16.4ft (5m)
Minimum Cut Length	50mm (1.97in)
Operating Voltage	24 VDC
Power Consumption	71 Watts
Rated Life (L70)	30000 Hours
Strip Width	10mm (0.39in)
Wattage per Foot	4.5 W/ft (14.8 W/m)
Wire Length	8in (20.3cm)

Print Specifications

Accessories & Power Supplies

All Accessories

24V Power Supplies

Controllers

Channels

Installation Supplies

Connectors

Wiring

Accessories Links

Accessory Category

Accessory Type:

$0.99 per Foot

PVC Jacketed 18 Gauge Wire - Three Conductor Power Wire - 18 AWG - 3 Wire Part Number: WP18-3CMR
In stock

This 3-conductor, 18-gauge power wire is designed for low-voltage variable color temperature LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.
$1.95 per Foot

Flat Power Wire - 3 Conductor - 10mm - NFLS10-FPW-3 (per foot) Part Number: NFLS10-FPW-3
In stock

This flat power cable is designed for creating discrete light installations with tunable white LED strip lights. Easily hide it under paint, wallpaper, spackle, trim, and molding. The 3-conductor wire can be used for powering 10-mm LED strip lights, connecting strip segments, and more. Easily secure this flat power cable to any surface with its adhesive backing, and forget about mounting wire clips. The power wire can carry 6 amps of current per channel and has a max run of 10'. This power wire has a solder point every 19.5".

$0.49 per Foot

PVC Jacketed 22 Gauge Wire - 3 Conductor Power Wire - WP22-3 Part Number: WP22-3
In stock

This 3-conductor, 22-gauge power wire is designed for low-voltage CCT LED lighting strips. It is UL-Listed, PP-insulated, and CMR rated flame-retardant. 2.2 amps per channel. Price per foot.

Reviews

95%

4.8 / 5 stars

8 reviews

Write Your Own Review

Write a Review

You're reviewing: 2016 Tunable White LED Strip Light/Tape Light - 24V - IP20 - 511 Lumens/ft - NFLS-VCTH1200

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

2016 Tunable White LED Strip Light/Tape Light - 24V - IP20 - 511 Lumens/ft - NFLS-VCTH1200

Features

Product Photos

Videos