LED Clearance or Side Marker Light - 2-1/2" Round - 4 LEDs - Clear Lens
Part Number
M4C-xHB4
Overview
Designed to accept industry standard 2-pin plugs, this 2.5” round LED light meets DOT FMVSS 108 requirements for use as a side marker light or clearance light. Mounts flush with compatible grommet or flange (sold separately). Each weatherproof light boasts 4 high-flux red LEDs that operate with in a wide 9-14.8 VDC range and consumes 90% less energy than incandescent lamps. A sonically sealed clear polycarbonate lens allows for a clean look on trucks and trailers. The truck/trailer lights are available in amber and red. Lifetime warranty on all truck/trailer lights. Also see similar colored-lens version.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Emergency Vehicle Lighting
- Trucks
- Trailer Lights
- RV Lights
- LED Boat Lights
- Campers
- horticulture centers
Similar Round Tail Lamps
| Color Options | Size | DOT/SAE ID Code | Mount Type | Price | ||
|
White
|
4 in
|
|
Flange
|
$13.99
ea.
|
|
|
Amber
Red
|
4 in
|
|
Flange
|
$12.99
ea.
|
|
|
White
|
4 in
|
|
Flange
|
$14.99
ea.
|
|
|
Red
|
4 in
|
|
Flange
|
$16.99
ea.
|
|
|
White
|
4 in
|
|
Flange
|
$24.99
ea.
|
|
|
Amber
Red
|
4 in
|
|
Flange
|
$24.99
ea.
|
|
|
Amber
Red
|
4 in
|
|
Flange
|
$24.99
ea.
|
|
|
Amber
Red
White
|
4 in
|
|
Flange
|
$24.99 - $29.99
ea.
|
|
Specifications
| Current Draw | 0.04A (40mA) |
|---|---|
| DOT Standard | FMVSS 108 |
| IP Rating | IP65 |
| Material | Polycarbonate |
| Mount Type | Flange |
| PC Rated | No |
| Standards And Certifications | DOT Compliant |
| Volts | 9~14.8 VDC |
.
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$6.99 ea.Grommet for 2-1/2" Round Peterson Clearance and Side Marker Lights - Flush Mount Part Number: B142-18In stockFlush mount 6.5" round trailer light using the black open back grommet. Fits 3" mounting holes.
-
$0.23 ea.16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164In stockUse this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.08 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
$2.99 ea.Branch Deflector Bracket for 2-1/2" Round Trailer Lights Part Number: M4-SAIn stockPolycarbonate surface mount adapter with PVC grommet for 2-1/2" round marker lamps. Allows quick and easy mounting of M4 series lamps. Flange and grommet only. Measures 146mm(5.75 in) x 78mm(3.07 in) x 31mm(1.22 in). Price for each. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$7.99 ea.Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2 Pin PL-10 Plug - 10-1/2" Long Part Number: B421-49In stockHardwire LED truck and trailer lights to power using the 2-wire PL-3 pigtail harness. Stripped hot wire and ground wire with ring terminal. Right angle plug for single or double contact.
-
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide. -
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each. -
$2.49 ea.2-1/2" Round Grommet for Trailer Lights Part Number: GR-25In stockDesigned for 2 1/2 inch round M4 series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights with out a built-on flange. -
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each. -
$3.49 ea.Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back Part Number: A55GBIn stockMount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.
-
View all
All Accessories1 additional compatible accessories
-
$6.99 ea.Grommet for 2-1/2" Round Peterson Clearance and Side Marker Lights - Flush Mount Part Number: B142-18In stock
Flush mount 6.5" round trailer light using the black open back grommet. Fits 3" mounting holes.
-
$3.49 ea.Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back Part Number: A55GBIn stock
Mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.
-
$4.99 ea.Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back Part Number: A57GBIn stockRecess mount a 2.5" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.23 ea.16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164In stockUse this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.08 ea.Hole Snap-In Strain Relief Bushing Part Number: PSB-xIn stockEliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
-
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each. -
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$1.99 ea.Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1In stockHigh performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack. -
$0.99 per Foot4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4In stockThis 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
-
$7.99 ea.Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2 Pin PL-10 Plug - 10-1/2" Long Part Number: B421-49In stock
Hardwire LED truck and trailer lights to power using the 2-wire PL-3 pigtail harness. Stripped hot wire and ground wire with ring terminal. Right angle plug for single or double contact.
-
$2.99 ea.Branch Deflector Bracket for 2-1/2" Round Trailer Lights Part Number: M4-SAIn stockPolycarbonate surface mount adapter with PVC grommet for 2-1/2" round marker lamps. Allows quick and easy mounting of M4 series lamps. Flange and grommet only. Measures 146mm(5.75 in) x 78mm(3.07 in) x 31mm(1.22 in). Price for each.
-
$2.49 ea.2-1/2" Round Grommet for Trailer Lights Part Number: GR-25In stockDesigned for 2 1/2 inch round M4 series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights with out a built-on flange.
-
$2.49 ea.2-1/2" Round Grommet for Trailer Lights Part Number: GR-25In stockDesigned for 2 1/2 inch round M4 series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights with out a built-on flange.
-
$1.99 ea.Right Angle 2-Wire Pigtail for Trailer Lights - 2-Pin PL-10 Plug - 6" Lead Part Number: PL-2SIn stockDesigned for MSM, M4, and M5 series marker lights, the right angle 2-pin plug feature 6 inch wires allowing for easy installation.
Reviews
5 / 5 stars
2 reviews
5 / 5 stars
2 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs