Name: LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A
Brand: Super Bright LEDs
SKU: DMX2-3CH-8A
Price: 39.99 USD
Availability: InStock

Overview

This DMX 512 decoder can control up to 3 different single-color 12-24 VDC LED products or any 1 RGB LED light bar or strip. The decoder can run in stand-alone mode using address code buttons or under DMX512 digital control signals using XLR-3 or RJ45 DMX512 input/output interfaces. The DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by a DMX512 console. The decoder allows for 256 brightness levels. Maximum load is 8 amps per channel. Includes male and female 3-pin XLR connectors.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps	8 Amps
Amps Per Channel	8 Amps/CH
Channels	3 Channels
Control Type	DMX512
DMX In/Out	RJ45, XLR3
Input Connection Type	Screw Terminals
IP Rating .	IP20
Operating Temperature	-40~+85 °C (-40~+185 °F)
Voltage	12-24 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

DMX Adapters

DMX Cables

DMX Connectors

DMX Terminators

12V Power Supplies

Connectors

Wiring

DMX Controllers

DMX Decoders

Accessories Links

Accessory Category

Accessory Type:

$5.99 ea.

DMX 5-Pin Male XLR5 Cable Connector Part Number: DMX5M
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin male XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Female XLR5 Cable Connector Part Number: DMX5F
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin female XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Male XLR3 Cable Connector Part Number: DMX3M
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin male XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Female XLR3 Cable Connector Part Number: DMX3F
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin female XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.

$3.99 ea.

DMX Terminator for XLR3 - Single Part Number: DMX3T
In stock

The DMX terminator plugs into any XLR 3-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.
$6.99 ea.

DMX Terminator for XLR5 - Single Part Number: DMX5T
In stock

The DMX terminator plugs into any XLR 5-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.

$0.49 ea.

TB-4P 4 Position Terminal Block - 4 Position Part Number: TB-4P
In stock

4 position terminal block for controllers with V+ RGB positions. Comes with required terminal blocks.
$0.69 ea.

TB-6P 6 Position Terminal Block - 6 Position Part Number: TB-6P
In stock

6 position terminal block for controllers and amplifiers with V+ RGB and + - positions. Comes with required terminal blocks.

$0.59 per Foot

PVC Jacketed 22 Gauge Wire - Five Conductor Power Wire - 22 AWG - 5 Wire Part Number: WP22-5CMR
In stock

This 5-conductor, 22-gauge power wire is designed for low-voltage RGBW LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.
$0.49 per Foot

PVC Jacketed 22 Gauge Wire - Three Conductor Power Wire - 22 AWG - 3 Wire Part Number: WP22-3CMR
In stock

This 3-conductor, 22-gauge power wire is designed for low-voltage variable color temperature LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.

$299.99 ea.

SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and USB Power Cord Included Part Number: SLESA-U9
In stock

Easily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The standalone mode controls up to 256 DMX channels and live mode controls up to 512 channels. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. Standalone function has 20 kb of memory. A USB power cable and programming software are included.
$574.99 ea.

SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10
In stock

Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi.

$17.99 ea.

LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC Part Number: DMX3-3CH-8A
In stock

The DMX512 decoder can control up to 3 different LED constant voltage products or any one RGB light bar or strip. Run the decoder under DMX512 digital control signals using the RJ45 or XLR3 input/output interfaces. For manual use, set the starting address of the driver using the DIP switches. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector. Includes one male and one female XLR3 connector.
$19.99 ea.

LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX4-3CH-8A
In stock

The DMX512 decoder can control up to 3 different constant voltage LED products or any one RGB light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 or XLR3 input/output interface. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A

Product Photos

Overview

Specifications