LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display

LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45

Part Number
DS-WDMX45

Features

  • 1 to 4 channel operation
  • Converts DMX512 signals to Single Color, Tunable White, RGB, or RGBW LED strips and fixtures
  • Easily selects mode and address with digital display
  • Fully waterproof case
  • Overheat, overload, and short circuit protection
  • Control 60W at 12V, 120W at 24V, or 180W at 36V
  • 5 year warranty
View more details
In Stock
$75.99 ea.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Loading...

Overview

DS series DMX512 Decoder allows LED lights to be connected to and controlled with DMX systems. with a fully waterproof case, the device can be used both indoor or outdoor with out the need for a protective enclosure. Digital display with simple buttons make it easy to control LEDs like strip lights or landscape fixtures. Select modes and assign addresses for up to 4 channels, 5 amps per channel, with a maximum power of 60-watts at 12 VDC or 180-watts at 36 VDC.

Pair with a Waterproof LED Strip.
Product Details:
  • 1-4 channel configuration
  • Wire length on each end: 10.5"
  • DMX IN and OUT
  • DMX address selction LED display
  • 60W-180W
  • 12 VDC, 24 VDC, 36 VDC
  • Rated IP67 for wet locations
  • RoHs, CE certificate
  • 5 year warranty
CE
CE
5 Years
5 Years
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps 20.5 Amps
Amps Per Channel 5 Amps/CH
Channels 4 Channels
Control Type DMX512
DMX In/Out Pigtail
Input Connection Type Pigtail
IP Rating IP67
Operating Temperature -30~+55 °C (-22~+131 °F)
Standards And Certifications CE
Voltage 12-36 VDC
Print Specifications

Accessories & Power Supplies

  1. RJ45 Male to RJ45 Male - DMX Signal Cable - 3m / 8m / 15m

    $12.99 ea.
    RJ45 Male to RJ45 Male - DMX Signal Cable - 3m / 8m / 15m Part Number: DMXRJ45M-RJ45M-xM
    In stock
    The DMX signal cable connects a male RJ45 to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  2. XLR3 Male to RJ45 Male - DMX Adapter - 20cm / 1m

    $9.99 ea.
    XLR3 Male to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX3M-RJ45M-x
    In stock
    The DMX adapter connects a female 3-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  3. XLR3 Female to RJ45 Male - DMX Adapter - 20cm / 1m

    $9.99 ea.
    XLR3 Female to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX3F-RJ45M-x
    In stock
    The DMX adapter connects a female 3-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  4. XLR5 Male to RJ45 Male - DMX Adapter - 20cm / 1m

    $12.99 ea.
    XLR5 Male to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX5M-RJ45M-x
    In stock
    The DMX adapter connects a male 5-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  5. XLR5 Female to RJ45 Male - DMX Adapter - 20cm / 1m

    $12.99 ea.
    XLR5 Female to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX5F-RJ45M-x
    In stock
    The DMX adapter connects a female 5-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  6. XLR5 Male to XLR5 Male - DMX Signal Cable - 20cm / 1m

    $8.99 ea.
    XLR5 Male to XLR5 Male - DMX Signal Cable - 20cm / 1m Part Number: DMX5M5M-x
    In stock
    The DMX signal cable connects a male 5-pin XLR to a male 5-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  7. XLR3 Female to XLR3 Female - DMX Signal Cable - 20cm / 1m

    $6.99 ea.
    XLR3 Female to XLR3 Female - DMX Signal Cable - 20cm / 1m Part Number: DMX3F3F-x
    In stock
    The DMX signal cable connects a female 3-pin XLR to a female 3-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  8. View all

    All Accessories

    1 additional compatible accessories

  1. RJ45 Male to RJ45 Male - DMX Signal Cable - 3m / 8m / 15m

    $12.99 ea.
    RJ45 Male to RJ45 Male - DMX Signal Cable - 3m / 8m / 15m Part Number: DMXRJ45M-RJ45M-xM
    In stock
    The DMX signal cable connects a male RJ45 to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  2. XLR5 Male to XLR5 Male - DMX Signal Cable - 20cm / 1m

    $8.99 ea.
    XLR5 Male to XLR5 Male - DMX Signal Cable - 20cm / 1m Part Number: DMX5M5M-x
    In stock
    The DMX signal cable connects a male 5-pin XLR to a male 5-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  3. XLR3 Female to XLR3 Female - DMX Signal Cable - 20cm / 1m

    $6.99 ea.
    XLR3 Female to XLR3 Female - DMX Signal Cable - 20cm / 1m Part Number: DMX3F3F-x
    In stock
    The DMX signal cable connects a female 3-pin XLR to a female 3-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  4. XLR5 Female to XLR5 Female - DMX Signal Cable - 20cm / 1m

    $8.99 ea.
    XLR5 Female to XLR5 Female - DMX Signal Cable - 20cm / 1m Part Number: DMX5F5F-x
    In stock
    The DMX signal cable connects a female 5-pin XLR to a female 5-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  5. XLR3 Male to XLR3 Male - DMX Signal Cable - 20cm / 1m

    $6.99 ea.
    XLR3 Male to XLR3 Male - DMX Signal Cable - 20cm / 1m Part Number: DMX3M3M-x
    In stock
    The DMX signal cable connects a male 3-pin XLR to a male 3-pin XLR, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  1. XLR3 Male to RJ45 Male - DMX Adapter - 20cm / 1m

    $9.99 ea.
    XLR3 Male to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX3M-RJ45M-x
    In stock
    The DMX adapter connects a female 3-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  2. XLR3 Female to RJ45 Male - DMX Adapter - 20cm / 1m

    $9.99 ea.
    XLR3 Female to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX3F-RJ45M-x
    In stock
    The DMX adapter connects a female 3-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  3. XLR5 Male to RJ45 Male - DMX Adapter - 20cm / 1m

    $12.99 ea.
    XLR5 Male to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX5M-RJ45M-x
    In stock
    The DMX adapter connects a male 5-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  4. XLR5 Female to RJ45 Male - DMX Adapter - 20cm / 1m

    $12.99 ea.
    XLR5 Female to RJ45 Male - DMX Adapter - 20cm / 1m Part Number: DMX5F-RJ45M-x
    In stock
    The DMX adapter connects a female 5-pin XLR to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.
  5. View all

    DMX Adapters

    18 additional compatible accessories

  1. LQC-x - Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  1. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  2. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  3. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $49.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  1. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  2. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  3. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V

    $33.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V Part Number: CVPS-xWH-24V
    In stock
    DiodeDrive Class 2 switching power supply is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Guaranteed with a 7 year warranty, the reliable device is designed for constant voltage operation. Widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.

Reviews

5 / 5 stars
1 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.