Name: 24 Channel LED DMX512 and RDM Decoder / Master - 3A/CH - 12-24V - OLED Display - DS-DMX243
Brand: Super Bright LEDs
SKU: DS-DMX243
Price: 269.99 USD
Availability: InStock

Overview

DS series 24 Channel DMX512 and RDM Decoder converts DMX and RDM signals to PWM for single color, CCT and/or RGB LED lighting products. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 24 channels, it allows a max of 3A and 120W per channel for controlling larger projects.

Selectable 16bit (65536 levels) or 8bit (256 levels) grey levels customize the smoothness of color fades. Choose between 4 PWM frequencies, with a maximum of 8000Hz to reduce flicker and enhance quality for audiovisual applications. Settings and features are easily accessible with OLED display menus and operated with 4 control buttons. 5-pin XLR, 3-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation and signal amplifier function improves signal transmission efficiency and anti-interference. Common anode screw-down terminals for connection to LED light strips or fixtures. Stand alone function allows for easy testing, as well as control of RGB LEDs when no DMX signal is present. This feature includes 10 built-in RGB programs with adjustable speed and brightness levels.

Product Details:

Easy operation with OLED display and 4 buttons
PWM frequency 250/500/2000/8000Hz selectable
16bit (65536 levels) /8bit (256 levels) grey level selectable
Output dimming curve gamma value 0.1-9.9 selectable
Protects against: over-heat, over-load, short circuit
1-24 channel configuration
Max load current: 120.5A
5-pin XLR, 3-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation and signal amplifier
DMX address selection OLED display
60W at 12V or 120W at 24V
Rated IP20 for dry locations
RoHs, CE certificate, FCC
5 year warranty

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps Per Channel	5 Amps/CH
Channels	24 Channels
Control Type	DMX512
Dimensions	12.76" x 4.57" x 1.52"
DMX In/Out	RJ45, Screw Terminals, XLR3, XLR5
IP Rating .	IP20
Max Input Current	120.5 A
Operating Temperature	-30~+55 °C (-22~+131 °F)
Output Current Draw per Channel	3 A x 24 CH, max 72 A
Product Weight	2lb 8oz (1.13kg)
Standards And Certifications	CE, FCC
Voltage	12-24 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

DMX Adapters

DMX Connectors

DMX Cables

12V Power Supplies

Wiring

24V Power Supplies

Accessories Links

Accessory Category

Accessory Type:

$5.99 ea.

DMX 5-Pin Male XLR5 Cable Connector Part Number: DMX5M
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin male XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Female XLR5 Cable Connector Part Number: DMX5F
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin female XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Male XLR3 Cable Connector Part Number: DMX3M
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin male XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Female XLR3 Cable Connector Part Number: DMX3F
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin female XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.

$12.99 ea.

RJ45 Male to RJ45 Male - DMX Signal Cable - 3m / 8m / 15m Part Number: DMXRJ45M-RJ45M-xM
In stock

The DMX signal cable connects a male RJ45 to a male RJ45, preventing lossless transmission of the signal. The cable is constructed of a shielded copper cable and zinc alloy connectors for secure connectivity with no interference.

$21.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
In stock

This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
$46.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
In stock

DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
$49.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
In stock

Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.

$0.85 per Foot

22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4Wire
In stock

22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
$0.59 per Foot

PVC Jacketed 22 Gauge Wire - Five Conductor Power Wire - 22 AWG - 5 Wire Part Number: WP22-5CMR
In stock

This 5-conductor, 22-gauge power wire is designed for low-voltage RGBW LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.
$0.49 per Foot

PVC Jacketed 22 Gauge Wire - Three Conductor Power Wire - 22 AWG - 3 Wire Part Number: WP22-3CMR
In stock

This 3-conductor, 22-gauge power wire is designed for low-voltage variable color temperature LED light strip installations. The UL-Listed, PP-insulated wire can be used inside walls and is CMR rated to prevent the spread of fire along the cable. Wire markings indicate every 2 feet. Price per foot.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 24 Channel LED DMX512 and RDM Decoder / Master - 3A/CH - 12-24V - OLED Display - DS-DMX243

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

24 Channel LED DMX512 and RDM Decoder / Master - 3A/CH - 12-24V - OLED Display - DS-DMX243

Features

Product Photos

Overview

Specifications