Linkable LED Linear Light Bar Fixture - Up To 270 lm/ft - 3000K / 4000K / 5700K
Part Number:
LBFA-xWxx-V3
Manufacturer Part Number:
Starting at
$16.99
ea.
Starting at
Was
In Stock
Features
- Plug-and-play connections
- Delivering 270 lm/ft with 1 LED chip per inch
- Flat, angled, and aimable mounts available
- 24 VDC for longer runs
- Sleek and durable aluminum housing
Overview
The LuxBar LED Linear Light Bar Fixture is an extremely versatile solution for many indoor lighting needs such as under-cabinet lighting, cove lighting, bookshelf lighting, and showcase lighting. Scalable aluminum fixtures are available in 6, 12, 24, 36 or 48-inch lengths. Each light fixture has one powerful SMD LED per inch of length. The LEDs have an output of 112-670 lumens and emit a wide 115° beam angle. With a CRI (color rendering index) of 80+, light from this LED fixture will represent the true color of any object or surrounding. Durable end connectors allow for hassle-free connection and removal of power cables. The non-weatherproof light fixture has 24V DC operation and is designed to last 40,000 hours.
Product Details:
- Aluminum housing
- IP20 rated for dry locations
- Flat, angled, and aimable mounts available
- Linkable with interconnect jumper
- Dimmable with touch dimmer switch
- 24 VDC operation
- 5-year warranty
Documents
LBFA-xWxx-V3 Specification Sheet Applications:
- Bookshelves
- Cove Lighting
- Off Grid Lighting
- Showcases
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| CRI | 80+ |
|---|---|
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
140mA |
| Dimmable | Yes |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof |
| Input Connection Type | LBFA |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
115° |
| LED Type | 5630 SMD |
| LED Lifetime | 40000 Hours |
| Operating Voltage | 24 VDC |
| Output Connection Type | LBFA |
| Wattage per Foot | 3.4 W/ft |
| Part NO |
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
LED Color | LEDs per Segment | Length | Lumens Per Foot |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
Wattage |
|---|---|---|---|---|---|---|---|---|
| LBFA-CW24-V3 | 5700K | 280 mA | Cool 5700K | 24 | 24 in. (2 ft) | 240 lm/ft | 6 | 6.6 Watts |
| LBFA-CW12-V3 | 5700K | 140 mA | Cool 5700K | 12 | 12 in. (1 ft) | 240 lm/ft | 12 | 3.3 Watts |
| LBFA-CW36-V3 | 5700K | 420 mA | Cool 5700K | 36 | 36 in. (3 ft) | 240 lm/ft | 4 | 10 Watts |
| LBFA-CW48-V3 | 5700K | 560 mA | Cool 5700K | 48 | 48 in. (4 ft) | 240 lm/ft | 3 | 13.9 Watts |
| LBFA-CW6-V3 | 5700K | 70 mA | Cool 5700K | 6 | 6 in. | 240 lm/ft | 24 | 1.7 Watts |
| LBFA-NW12-V3 | 4000K | 140 mA | Natural 4000K | 12 | 12 in. (1 ft) | 220 lm/ft | 12 | 3.3 Watts |
| LBFA-NW24-V3 | 4000K | 280 mA | Natural 4000K | 24 | 24 in. (2 ft) | 220 lm/ft | 6 | 6.6 Watts |
| LBFA-NW36-V3 | 4000K | 420 mA | Natural 4000K | 36 | 36 in. (3 ft) | 220 lm/ft | 4 | 10 Watts |
| LBFA-NW48-V3 | 4000K | 560 mA | Natural 4000K | 48 | 48 in. (4 ft) | 220 lm/ft | 3 | 13.9 Watts |
| LBFA-NW6-V3 | 4000K | 70 mA | Natural 4000K | 6 | 6 in. | 220 lm/ft | 24 | 1.7 Watts |
| LBFA-WW12-V3 | 3000K | 140 mA | Warm 3000K | 12 | 12 in. (1 ft) | 270 lm/ft | 12 | 3.4 Watts |
| LBFA-WW24-V3 | 3000K | 280 mA | Warm 3000K | 24 | 24 in. (2 ft) | 270 lm/ft | 6 | 6.7 Watts |
| LBFA-WW36-V3 | 3000K | 420 mA | Warm 3000K | 36 | 36 in. (3 ft) | 270 lm/ft | 4 | 10.3 Watts |
| LBFA-WW48-V3 | 3000K | 560 mA | Warm 3000K | 48 | 48 in. (4 ft) | 270 lm/ft | 3 | 13.9 Watts |
| LBFA-WW6-V3 | 3000K | 70 mA | Warm 3000K | 6 | 6 in. | 270 lm/ft | 24 | 1.7 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
