Waterproof LED Light Bar - 3'3" Super Flexible LED Bar with 30 SMDs/ft. - 5-mm Through Hole LED - 269 Lumens

Outdoor Single-Color LED Strip Light - Super Flexible with Through Hole LEDs - 12V - Waterproof IP67 - 1m - UV-BlackLight

brand logo
Part Number


  • Side emitting & conforms to most shapes
  • Can be cut every 1"
  • 1m (3.3ft) with 85 Lumens/ft
  • Waterproof for outdoor use
  • 0-100% Dimmable
View more details
In Stock
Only %1 left

Starting at $35.99 ea.
Free Shipping
On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify


This super-flexible, waterproof LED strip light operates on 12 VDC. Using 5-mm through hole LEDs, it emits up to 85 lumens of cool white, warm white, UV (blacklight), blue, green, yellow, orange, or red illumination per foot. The 3.2' side-emitting LED light strip is completely encapsulated in rubber, can be easily cut into separate 3-LED segments, and will conform to most shapes up to a 0.25" radius. Each strip has a 20" power wire on both ends for connecting multiple units together. It will appear at full brightness for 10,000 hours. After 10,000 hours of use, a decline in lumen output might be noticeable. Mount using the included 4 mounting clips and screws. This LED strip light is great for landscape lighting, vehicles, boats, marine lighting, and many more indoor or outdoor applications.
Product Details:
  • Waterproof for outdoor use
  • 0-100% Dimmable
  • 4 mounting clips and screws included
  • 12 VDC
  • 5-Year warranty


  • Accent Lighting
  • Bias Lighting
  • Boats and Marine
  • Horticulture Centers
  • Off Grid Lighting
  • Outdoor Accent Lights
  • RV Lights
  • Stairways
  • Trade Shows
  • Vehicle Accent Lighting
  • Walkways
5 Years
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

LED Strip Lights FAQs

What is the difference between 12V and 24V strip lights?

Most LED strips are extremely similar despite differences in voltage. They look the same and are capable of similar light output. Despite this, there are some key differences between voltages which affect use for various applications. 12-volt DC strips can be connected directly to a vehicle's 12-volt DC electrical system. Higher voltage strips (e.g. 24 VDC, 36 VDC, or 48 VDC) on the other hand allow for longer runs and higher densities of LEDs over their 12-volt counterparts. 120 VAC strips offer incredibly long max runs and the ability to power from a standard wall outlet. For the maximum run of a strip see max run in the specification table. Read More »

How long of a run can I make my strip?

The max run of an LED strip is dependent on two primary things—voltage and density.

Higher voltage strips will generally give you a longer run than comparable lower voltage strips (e.g. 24 VDC would have a longer max run than 12 VDC with the same type of strip and density). Similarly, lower density strips have the potential for longer runs than high density strips.

So essentially, max run can be lengthened by choosing a higher voltage and/or lower density version of a strip, but a higher voltage could also provide a similar max run at an increased density where brightness or 'line of light' are more of a concern. If an install needs to extend beyond a strips max run, additional power feeds can also be run back to the power supply from other points in the run.

Please refer to the max run spec listed in the specification table of each product information page for specific information about each strip. Read More »

What is color temperature? Which one is best?

Graphic showing light output color temperature range

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Read More About: Lumens vs CCT vs CRI »

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Read More About: Lumens vs CCT vs CRI »

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

LED Strip Light Power Supply Calculator

Calculate the minimum power supply capacity needed for your installation. Minimum wattage is calculated as estimated wattage / 0.80 to give you the 20% wattage overhead necessary to improve power supply longevity.



Minimum Power Supply Wattage:
xx watts.

Shop Indoor Power Supplies

We've pre-filtered compatible power supplies for you based on voltage and weatherproofing requirements. Double check your wattage selection based on the calculation above before adding to cart. Many of our power supplies are offered in multiple wattages.


LED Beam Angle 80°
Current Draw per Foot 203mA
Minimum Cut Length 30mm (1.2in)
Dimmable Yes
Finish Copper
Input Connection Type Pigtail
IP Rating IP67
LED Density 30 LEDs/ft
LED Lifetime 10000 Hours
LED Type 5mm
LEDs per Segment 3
Length 3.3ft (1m)
Max Run (Class 2) Up to 9.5ft (2.9m)
Operating Voltage 9-14.8 VDC
Power Consumption 7.7 Watts
Strip Width 13.5mm (0.53in)
Wattage per Foot 2.5 Watts
Wire Length 1.6 ft (48.7 cm)
Print Specifications
Swipe left to see additional specifications
Part NO Color Temperature CRI Current Draw LED Color Brightness Series
WFLB-B96 460 mA Blue 85 lm/ft (280 lm/m)
WFLB-CW96 6500K 70+ 430 mA Cool 6500K 85 lm/ft (280 lm/m)
WFLB-G96 640 mA Green 85 lm/ft (280 lm/m)
WFLB-O96 640 mA Orange 85 lm/ft (280 lm/m)
WFLB-R96 530 mA Red 85 lm/ft (280 lm/m)
WFLB-UV96 640 mA UV (Blacklight) 85 lm/ft (280 lm/m)
WFLB-WW96 2700K 70+ 430 mA Warm 2700K 83 lm/ft
WFLB-Y96 640 mA Yellow 85 lm/ft (280 lm/m)

Accessories & Power Supplies


4.5 / 5 stars
100 reviews

Customer Submitted Photos
Write Your Own Review

Write a Review

You're reviewing: Outdoor Single-Color LED Strip Light - Super Flexible with Through Hole LEDs - 12V - Waterproof IP67 - 1m - UV-BlackLight

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs