120V White LED Strip Light - Highlight Series Tape Light - Plug and Play - TRIAC Dimmable - High CRI - IP65 - 3000K / 4000K / 5000K - 5m / 25m
Part Number:
STACD-AxK90-C8D-14SxM-120V
Manufacturer Part Number:
Starting at
$149.99
ea.
Starting at
Was
In Stock
Features
- Easy plug-and-play installation
- TRIAC dimmable
- 90+ CRI provides vibrant color rendering
- Available in 5m or 25m lengths
Overview
The 120V White Plug and Play LED Strip Light is designed for versatile indoor and outdoor use. It features TRIAC dimmable technology and a 90+ CRI for accurate color rendering. It is available in 3000K, 4000K, or 5000K to suit your application. Waterproof construction allows for use in wet locations, and plug-and-play installation simplifies setup. Ideal for under-cabinet lighting, outdoor lighting, and residential accents. This tape light is available in 16.4 ft (5 m) and 82 ft (25 m) lengths.
Note: Any modification that is required should only be done with the power turned off/unplugged and by a licensed electrician.
Note: Any modification that is required should only be done with the power turned off/unplugged and by a licensed electrician.
Product Details:
- Max run (Class 2): up to 164 ft (50 m)
- IP65 waterproof, suitable for wet locations
- 120° beam
- 120 VAC
- ETL Listed
- 5-year warranty
STACD Series 120 VAC Strips Specification Sheet Applications:
- Accent Lighting
- Ambient Home Lighting
- Cove Lighting
- Exhibitions
- Museums
- Offices
- Photography Lighting
- Retail Shops
- Task Lighting
- Trade Shows
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Specifications
| Ambient Operating Temperature | -20 to 45 °C (-4 to 113 °F) |
|---|---|
| Certifications/Compliance | ETL Listed |
| CRI | 90+ |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
36mA |
| Dimmable | Yes |
| Dimmer Type | TRIAC |
| Efficacy | 90 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Wet Locations, Waterproof |
| Finish | White |
| Input Connection Type | 1-15P Plug |
|
IP Rating
IP Rating
|
IP65 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Density | 24 LEDS/ft |
| LED Type | 2835 SMD |
| LEDs per Segment | 8 |
| LED Lifetime | 36000 Hours |
| Lumens Per Foot | 384 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
164 ft (50 m) |
| Minimum Cut Length | 100mm (3.9in) |
| Operating Voltage | 120 VAC |
| Series | HighLight |
| Strip Width | 17mm (0.66in) |
| Wattage | 70 Watts |
| Wattage per Foot | 4.3 W/ft |
| Wire Length | 18 in. |
| Part NO |
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
LED Color | Length |
|---|---|---|---|---|
| STACD-A30K90-C8D-14S25M-120V | 3000K | 2.9 A | Warm 3000K | 82 ft (25 m) |
| STACD-A30K90-C8D-14S5M-120V | 3000K | 580 mA | Warm 3000K | 16.4 ft (5 m) |
| STACD-A40K90-C8D-14S25M-120V | 4000K | 2.9 A | Natural 4000K | 82 ft (25 m) |
| STACD-A40K90-C8D-14S5M-120V | 4000K | 580 mA | Natural 4000K | 16.4 ft (5 m) |
| STACD-A50K90-C8D-14S25M-120V | 5000K | 2.9 A | Cool 5000K | 82 ft (25 m) |
| STACD-A50K90-C8D-14S5M-120V | 5000K | 580 mA | Cool 5000K | 16.4 ft (5 m) |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
