Name: 120V LED Strip Light - White Highlight Series Tape Light - Plug and Play - 5m / 25m - High CRI - IP65 Waterproof
Brand: Super Bright LEDs
SKU: HL-IP65-90CRI-xm-120V
Price: 149.99 USD
Availability: OutOfStock
Rating: 5 (2 reviews)

Overview

Description

At 120 volts, this strip light is designed to eliminate the need for external drivers. Efficient, easy-to-install, and slim, the strips are ideal for updating and enhancing any space while maintaining a low profile. Perfect for a wide range of applications to enhance the look of any space, indoor or outdoor. Mount using our optional Mounting Kit (sold separately).

Note:
Any modification that is required should only be done with the power turned off/un-plugged and by a licensed electrician.

Product Details:

Available in 5m or 25m
Slim 17mm width
Segment Length: 100mm (3.94 in)
Max run: 50m
IP65 weatherproof rating
120 VAC
ETL Listed
5 year warranty

A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
Brightness	427 lm/ft
Certifications/Compliance	ETL Listed
CRI	90+
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	36mA
Dimmable	Yes
Efficacy	100 lm/W
Environmental Rating Learn more about environmental rating	Suitable for Wet Locations, Waterproof
Finish	White
IP Rating	IP65
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	24 LEDS/ft
LED Type	2835 SMD
LEDs per Segment	8
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Up to 164ft (50m)
Minimum Cut Length	100mm (3.9in)
Operating Voltage	120 VAC
Rated Life (L70)	36000 Hours
Series	HighLight
Strip Width	17mm (0.66in)
Wattage per Foot	4.3 W/ft (14 W/m)
Wire Length	19in (48.3cm)

Print Specifications

Part NO	CCT Value CCT Value	Color Temperature Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	Current Draw Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	Length	Power Consumption
STAC-A30K90-C8D-14S25M-120V	3000K	Warm 3000K	2.9 A	82ft (25m)	350 Watts
STAC-A30K90-C8D-14S5M-120V	3000K	Warm 3000K	580 mA	16.4ft (5m)	70 Watts
STAC-A40K90-C8D-14S25M-120V	4000K	Natural 4000K	2.9 A	82ft (25m)	350 Watts
STAC-A40K90-C8D-14S5M-120V	4000K	Natural 4000K	580 mA	16.4ft (5m)	70 Watts
STAC-A50K90-C8D-14S25M-120V	5000K	Cool 5000K	2.9 A	82ft (25m)	350 Watts
STAC-A50K90-C8D-14S5M-120V	5000K	Cool 5000K	580 mA	16.4ft (5m)	70 Watts

Accessories & Power Supplies

All Accessories

Channels

Installation Supplies

Waterproofing

Connectors

Dimmers

Powercord

Wiring

Mounting

Accessories Links

Accessory Category

Accessory Type:

$16.99 ea.

GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
In stock

The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
$61.99 ea.

GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 2m Part Number: C0758
In stock

The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for line-of-light illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach a waterproof rating for wet area use when installed with a cover, end caps, and neutral silicone sealant.

$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
$29.99 ea.

3M-FTS Double-Sided Foam Tape Strip - Double-Sided Foam Tape Strip Part Number: 3M 4492
In stock

High performance 3M Double Coated Polyethylene Foam Tape Strips - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. 72 yard reel, which measures 1/4in wide x 216ft long.
$0.39 ea.

22-16 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2216
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-16 AWG Black/White wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
$0.04 ea.

18-16 AWG Orange Twist-On Wire Connector Part Number: WN-O1816
In stock

Use these 18-16 AWG orange wire connectors for closed-end connections and secure splices. The twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. These wire connectors can be removed and reused.

$0.99 ea.

Solderless End Cap - 120V Highlight Series Strip Light Part Number: STAC-EC
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!
$6.99 ea.

PVC Sealant 1 oz. - 120V Highlight Series Strip Light Part Number: STAC-PVC1OZ
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!

$9.99 ea.

Hardwire Adapter Kit - 120V Highlight Series Strip Light Part Number: STAC-PT50
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!
$6.99 ea.

Solderless L-Connector - 120V Highlight Series Strip Light Part Number: STAC-2LC
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!
$3.99 ea.

Solderless Butt Connector - 120V Highlight Series Strip Light Part Number: STAC-2DC
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!
$7.99 ea.

Solderless 1ft Jumper Connector - 120V Highlight Series Strip Light Part Number: STAC-2J12
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!
$11.99 ea.

Wall Plug Adapter Kit - 120V Highlight Series Strip Light Part Number: STAC-1-15P-50
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!

$21.99 ea.

Single-Pole Switch and Slide LED Dimmer - 120V - White Part Number: DND-LED1-1-x
In stock

Use this white 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The single-pole dimmer can be used to control lights from one location. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level without flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
$22.99 ea.

3-Way Switch and Slide LED Dimmer - 120V Part Number: DND-LED3-1-x
In stock

Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The 3-way dimmer can be used to control lights from 2 locations or can be used for single-pole installation. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).

$7.99 ea.

Power Cord for Power Supplies - Power Cord for Power Supplies Part Number: _POWERCORD
In stock

Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.

$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.

$2.99 ea.

Mounting Kit - 120V Highlight Series Strip Light Part Number: STAC-CLIP
In stock

Accessory for driverless 120V Strip Light for indoor or outdoor applications! Plug-and-play for quick installation and dimmable. Shop now!

Reviews

100%

5 / 5 stars

2 reviews

Write Your Own Review

Write a Review

You're reviewing: 120V LED Strip Light - White Highlight Series Tape Light - Plug and Play - 5m / 25m - High CRI - IP65 Waterproof

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

120V LED Strip Light - White Highlight Series Tape Light - Plug and Play - 5m / 25m - High CRI - IP65 Waterproof

Features

Product Photos

Overview

Specifications