LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display

LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A

Part Number
DMX2-3CH-8A
In Stock
$39.99 ea.

Overview

This DMX 512 decoder can control up to 3 different single-color 12-24 VDC LED products or any 1 RGB LED light bar or strip. The decoder can run in stand-alone mode using address code buttons or under DMX512 digital control signals using XLR-3 or RJ45 DMX512 input/output interfaces. The DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by a DMX512 console. The decoder allows for 256 brightness levels. Maximum load is 8 amps per channel. Includes male and female 3-pin XLR connectors.
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps 8 Amps
Amps Per Channel 8 Amps/CH
Channels 3 Channels
Control Type DMX512
DMX In/Out RJ45, XLR3
Input Connection Type Screw Terminals
IP Rating IP20
Operating Temperature -40~+85 °C (-40~+185 °F)
Volts 12~24 VDC
Print Specifications

Accessories & Power Supplies

  1. View all

    All Accessories

    1 additional compatible accessories

  1. LQC-x - Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  1. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  2. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  3. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  4. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  5. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  6. Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC

    $39.99 ea.
    Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JB
    In stock
    This enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers.
  7. Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC

    $8.99 ea.
    Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. Magnitude Dimmable LED Power Supply

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  9. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $31.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  10. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $33.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  11. Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC

    $99.99 ea.
    Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC Part Number: KVP-12120-TDL
    In stock
    This enclosed dimmable LED driver/power supply has a maximum load of 120 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The sealed driver allows for indoor or outdoor use. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers.
  12. Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC

    $53.99 ea.
    Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC Part Number: RSP-x-12
    In stock
    * Universal AC input / Full range
    * Built-in active PFC function, PF>0.93
    * Protections: Short circuit / Overload / Over voltage / Over temperature
    * Built-in constant current limiting circuit
    * Remote ON-OFF control(Optional)
    * LED indicator for power on
    * 100% full load burn-in test
    * Fixed switching frequency at PFC:67KHz PWM:134KHz
    * 3 years warranty
    * Made by Mean Well
  13. View all

    Power Supplies

    19 additional compatible accessories

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs