LED Forklift Safety/Warning Light with Sequential Flashing Arrow Beam Pattern

LED Forklift Safety / Warning Light with Sequential Flashing Arrow Beam Pattern

Part Number
SWL-x20-SFA

Features

  • Projects sequential flashing red or blue arrow on ground up to 20’ away
  • Durable aluminum housing and stainless steel hardware
  • Easily mounted on the top (front or rear) of industrial vehicles
  • Lifetime warranty
View more details
In Stock

$79.99 ea.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Frequently Bought Together

Overview

LED Forklift Safety/Warning Light projects a red or blue arrow that indicates the direction of the forklift, either from the back or front. This allows enough time for pedestrians to see the light and safely move out of the vehicle’s path. The line of the arrow flashes sequentially, alerting pedestrians of the oncoming machinery, even around blind corners. Constructed with durable, impact-resistant aluminum housing to seal out moisture and stainless steel hardware. Easily mounted on the top (front or rear) of forklifts, order-pickers, or other material-handling equipment.
Product Details:
  • Pigtail electrical connection
  • IP67 rated for wet conditions
  • 50,000 hour L70 lifespan
  • Arrow beam pattern
  • CE Listed
CE
CE
Lifetime
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Safety Lighting
  • Material Handling
  • Industrial Vehicles
  • Forklift Lighting
  • Order Picker Lighting
  • Automated Guided Vehicles
  • Sweepers

Specifications

Brand Super Bright LEDs
Beam Pattern Arrow
Current Draw 1.67A (1670mA)
Finish Black
Input Connection Type Pigtail
IP Rating IP67
LED Lifetime 50000 Hours
Length 3.2in (0.27ft)
Lumen 600 Lumen
Material Aluminum Housing, Polycarbonate Lens, Stainless Steel Hardware
Operating Temperature -40~+80 °C (-40~+176 °F)
Power Consumption 20 Watts
Standards And Certifications CE
Volts 12~60 VDC
Wire Length 14in (35.5cm)
Print Specifications
Swipe left to see additional specifications
Part NO Color Options
SWL-B20-SFA Blue
SWL-R20-SFA Red

Accessories & Power Supplies

  1. Installation Kit for Blue LED Forklift Light

    $21.99 / kit

    Installation Kit for Single Mount LED Forklift Lights - Single Mount Forklift Lighting Kit Part Number: SWL-KIT-SINGLE
    In stock

    Use this single-mount kit for LED forklift lights with one mounting point to provide security and visibility on forklifts and other warehouse equipment.

  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Screw/Adhesive Cable Tie Mounting Bases

    $0.04 ea.
    Screw/Adhesive Cable Tie Mounting Bases Part Number: CTMB-x
    In stock
    Use these cable tie mounting bases to secure wires and cables to surfaces. Mounting bases can be attached by using their included adhesive pads or screw holes. Cable ties and screws are sold separately. Available in 3/4", 1-1/8", and 1-1/2" sizes. Price per unit.
  4. Work Light Round Magnet Base

    $5.99 ea.

    Work Light Round Magnet Base - Magnet Base Part Number: WL-MB
    In stock
    3" Round Magnet Base encased in steel cup with 0.33" center mounting hole. Includes foam pad to prevent scratches and nut and bolt for attaching LED Work Light or LED Off Road Light Bar. For use on steel surfaces such as vehicles, refrigerators, machinery, filing cabinets, beams, and doors.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  1. Installation Kit for Blue LED Forklift Light

    $21.99 / kit

    Installation Kit for Single Mount LED Forklift Lights - Single Mount Forklift Lighting Kit Part Number: SWL-KIT-SINGLE
    In stock

    Use this single-mount kit for LED forklift lights with one mounting point to provide security and visibility on forklifts and other warehouse equipment.

  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  1. Screw/Adhesive Cable Tie Mounting Bases

    $0.04 ea.
    Screw/Adhesive Cable Tie Mounting Bases Part Number: CTMB-x
    In stock
    Use these cable tie mounting bases to secure wires and cables to surfaces. Mounting bases can be attached by using their included adhesive pads or screw holes. Cable ties and screws are sold separately. Available in 3/4", 1-1/8", and 1-1/2" sizes. Price per unit.
  2. Work Light Round Magnet Base

    $5.99 ea.

    Work Light Round Magnet Base - Magnet Base Part Number: WL-MB
    In stock
    3" Round Magnet Base encased in steel cup with 0.33" center mounting hole. Includes foam pad to prevent scratches and nut and bolt for attaching LED Work Light or LED Off Road Light Bar. For use on steel surfaces such as vehicles, refrigerators, machinery, filing cabinets, beams, and doors.

Reviews

Write Your Own Review

Write a Review

You're reviewing: LED Forklift Safety / Warning Light with Sequential Flashing Arrow Beam Pattern

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs