LBFA-DT LuxBar Mini Touch Dimmer - Touch Dimmer

Part Number: LBFA-DT
Manufacturer Part Number:
$12.99 ea.
In Stock
box-open-solid
truck-fast-solid
On orders $300 and up within the contiguous U.S.
Item does not qualify

Overview

LBFA series touch dimmer for LBFA linear light fixtures. Dimmer can be placed anywhere on the series and must be used with included 24 VDC power supply. Includes the power connector (LBFA-PDT), two direct interconnect jumpers (LBFA-I), 1 flat type mounting clip (LBFA-MC1), and user manual.
2 Years
2 Years
2 Years
2 Years

Specifications

Amps 1.60 Amps
Amps Per Channel 1.6 Amps/CH
Channels 1 Channel
Control Type In-line Wired
Input Connection Type 5.5 mm x 2.1 mm DC Barrel
Input Voltage 24 VDC
Voltage 24 VDC
Warranty 2 Year
Model LBFA-D LuxBar 24VDC Dimmers Specifications
Mini Touch Dimmer 2 Channel Dimmer 4 Channel Dimmer
SPECIFICATIONS LBFA-DT LBFA-D2 LBFA-D4
PRICE
$14.95
$49.95
$59.95
DC INTPUT/OUTPUT VOLTAGE 24V ±5% 24V ±5% 24V ±5%
OUTPUT RATED CURRENT 1.6A (1600ma) 1.6A (1600ma) per channel / 3.2A (3200ma) total 1.6A (1600ma) per channel / 6.4A (6400ma) total
DC OUTPUT POWER 40W 80W 160W
COMPATIBLE POWER SUPPLY CPS-24VDC-24W or CPS-24VDC-48W CPS-24VDC-24W or CPS-24VDC-48W SP-240-24, S-320-24 or RD-150-24
MAX NO. OF LBFA-W2 FIXTURES (max run* = 72) 72 145 290
MAX NO. OF LBFA-W6 FIXTURES (max run* = 24) 24 48 96
MAX NO. OF LBFA-W12 FIXTURES (max run* = 12) 12 24 48
MAX NO. OF LBFA-W24 FIXTURES (max run* = 6) 6 12 24
MAX NO. OF LBFA-W36 FIXTURES (max run* = 4) 4 8 16
MAX NO. OF LBFA-W48 FIXTURES (max run* = 3) 3 6 12
To determine how many LED products can be connected to a power supply:
divide the total current capability of the power supply by the current draw of the LED product
WEIGHT 233g 233g
WORKING TEMP., HUMIDITY 0°C~+40°C, 20%~80% RH 0°C~+40°C, 20%~80% RH
STORAGE TEMP., HUMIDITY -20°C~+80°C, 10%~90% RH -20°C~+80°C, 10%~90% RH
*Maximum number of units in one run connected end to end - for higher quantities, multiple runs back to the power supply must be made to prevent excessive voltage drop
Instructions Manual for Model LBFA-DT Mini Touch Dimmer
Safety Precautions
  • Do not scratch the sensing area. Do not disassemble, repair, or modify the device
  • Disconnect the power (adapter) before installing/removing this dimmer.
  • Do not use this device near water, or moisture for indoor use only.
  • This product should only be operated from the type of power source indicated on the label.
Part Definition
diagram
1.) Dimmer I/O socket - connect to adapter or light bar (bi-directional)
2). Sensor area - sensing region for on/off or dimming control
Recommended Power Supply:
CPS-24VDC-48W (24VDC/2A/48W) Max 40W or 11.8ft (360cm) of LBFA LuxBar series Light Fixtures
Operating Voltage:
DC 24V±5%
Operating Description
On/Off: Use your finger to touch the sensor area shortly.
Dimming:
Continue to hold the finger on the sensor area, it will dim the light bar brightness
Brightness Setting Memory: The previous selected brightness is stored until power is removed from the dimmer
diagram
System Configuration
Mini dimmer can be installed at any place in a light bar chain or network. Several scenarios are illustrated below.
Scenario 1: Dimmer at the end of a chain
diagram
Scenario 2: Dimmer at the middle of a chain
diagram
Scenario 3: Dimmer at the beginning of a chain
diagram
Scenario 4: Dimmer at a branching of a network
diagram
Installation Guide
Step 1: Refer to section IV and configure the preferred dimmer position
Step 2: Connect dimmer to the light bar or adapter with corresponding cables or accessories.
Step 3: Use the specific power line included with kit to connect the adapter when a mini dimmer is installed in a light bar chain or network.
Step 4: Plug in the power (adapter) to AC line.

Accessories & Power Supplies

Reviews

Customer Submitted Photos
Write Your Own Review
You're reviewing: LBFA-DT LuxBar Mini Touch Dimmer - Touch Dimmer
Upload up to 3 image(s)
spinner
check-circle You submitted your review for moderation

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

Review Guidelines

Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs
loader
Loading...