5m White LED Strip Light - Radiant™ Series LED Tape Light - 12V/24V - IP20

5m White LED Strip Light - Radiant Series LED Tape Light - 12V / 24V - IP20

Part Number
RA-IP20-80CRI-5m

Features

  • 80+ CRI rating ensures vibrant, natural-looking color tones
  • 3M™ adhesive backing for surface mounting
  • 0-100% dimmable
  • Lifetime warranty
View more details
In Stock

$62.99 ea.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Loading...

Overview

This flexible LED strip light is the foundation of Super Bright LEDs’ Radiant Series. It is long-lasting, efficient, and perfect for any indoor application. Peel-and-stick 3M™ adhesive backing enables fast, easy mounting. Backed by a lifetime warranty.
Product Details:
  • 5050 SMD LEDs offer superior brightness
  • 18 LEDs/ft
  • 12V input for operation with a vehicle; 24V for longer runs
  • Run 12V strips up to 5m; run 24V strips up to 7m
  • Strip width measures 10mm
  • Lifetime exceeds 50000 hours
  • CE certified and UL listed
  • Lifetime warranty
UL Listed
UL Listed
CE
CE
Lifetime
Lifetime
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Sign Lighting
  • LED Backlights
  • Task Lighting
  • Accent Lighting
  • Off Grid Lighting
  • Retail
  • Coves
  • Under-Cabinets
  • Bias Lighting
  • Display Cases
  • Trade Shows
  • TV backlighting

LED Strip Lights FAQs

What is the difference between 12V and 24V strip lights?

Most LED strips are extremely similar despite differences in voltage. They look the same and are capable of similar light output. Despite this, there are some key differences between voltages which affect use for various applications. 12-volt DC strips can be connected directly to a vehicle's 12-volt DC electrical system. Higher voltage strips (e.g. 24 VDC, 36 VDC, or 48 VDC) on the other hand allow for longer runs and higher densities of LEDs over their 12-volt counterparts. 120 VAC strips offer incredibly long max runs and the ability to power from a standard wall outlet. For the maximum run of a strip see max run in the specification table. Read More »

How long of a run can I make my strip?

The max run of an LED strip is dependent on two primary things—voltage and density.

Higher voltage strips will generally give you a longer run than comparable lower voltage strips (e.g. 24 VDC would have a longer max run than 12 VDC with the same type of strip and density). Similarly, lower density strips have the potential for longer runs than high density strips.

So essentially, max run can be lengthened by choosing a higher voltage and/or lower density version of a strip, but a higher voltage could also provide a similar max run at an increased density where brightness or 'line of light' are more of a concern. If an install needs to extend beyond a strips max run, additional power feeds can also be run back to the power supply from other points in the run.

Please refer to the max run spec listed in the specification table of each product information page for specific information about each strip. Read More »

What is color temperature? Which one is best?

Graphic showing light output color temperature range

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Read More About: Lumens vs CCT vs CRI »

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Read More About: Lumens vs CCT vs CRI »

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

LED Strip Light Power Supply Calculator

Calculate the minimum power supply capacity needed for your installation. Minimum wattage is calculated as estimated wattage / 0.80 to give you the 20% wattage overhead necessary to improve power supply longevity.

Outdoor?

Calculate

Minimum Power Supply Wattage:
xx watts.

Shop Indoor Power Supplies

We've pre-filtered compatible power supplies for you based on voltage and weatherproofing requirements. Double check your wattage selection based on the calculation above before adding to cart. Many of our power supplies are offered in multiple wattages.

Specifications

Ambient Operating Temperature -20~+45 °C (-4~+113 °F)
Brightness 360 lm/ft (1180 lm/m)
Certifications/Compliance CE, UL Listed
CRI 80+
Dimmable Yes
Efficacy 305 lm/W
Environmental Rating Non-weatherproof, Suitable for Dry Locations
Finish White
IP Rating IP20
LED Beam Angle 120°
LED Density 18 LEDs/ft
LED Type 5050 SMD
Length 16.4ft (5m)
Power Consumption 64 Watts
Rated Life (L70) 50000 Hours
Series Radiant
Strip Width 10mm (0.39in)
Wattage per Foot 3.9 W/ft (12.8 W/m)
Wire Length 508mm (20in)
Print Specifications
Swipe left to see additional specifications
Part NO CCT Value Color Temperature Current Draw Current Draw per Foot LEDs per Segment Max Run (Class 2) Minimum Cut Length Operating Voltage
STN-A30K80-A3A-10B5M-12V 3000K Warm 3000K 5.33A (5330mA) 325mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC
STN-A30K80-A6A-10B5M-24V 3000K Warm 3000K 2.67A (2670mA) 163mA 6 Up to 23ft (7m) 100mm (3.9in) 24 VDC
STN-A40K80-A3A-10B5M-12V 4000K Natural 4000K 5.33A (5330mA) 325mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC
STN-A40K80-A6A-10B5M-24V 4000K Natural 4000K 2.67A (2670mA) 163mA 6 Up to 23ft (7m) 100mm (3.9in) 24 VDC
STN-A50K80-A3A-10B5M-12V 5000K Cool 5000K 5.33A (5330mA) 325mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC
STN-A50K80-A6A-10B5M-24V 5000K Cool 5000K 2.67A (2670mA) 163mA 6 Up to 23ft (7m) 100mm (3.9in) 24 VDC
STN-A65K80-A3A-10B5M-12V 6500K Cool 6500K 5.33A (5330mA) 325mA 3 Up to 16.4ft (5m) 50mm (1.97in) 12 VDC
STN-A65K80-A6A-10B5M-24V 6500K Cool 6500K 2.67A (2670mA) 163mA 6 Up to 23ft (7m) 100mm (3.9in) 24 VDC

Accessories & Power Supplies

  1. GIZA aluminum channels with flat lenses

    $16.99 ea.
    GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
    In stock
    The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
  2. PDS-NK LED aluminum strip channel - flush mount - 13mm

    $15.99 ea.
    PDS-NK Aluminum Channel - Recessed - For Strips Up To 14mm - 1m / 2m Part Number: C1588
    In stock
    The KLUS® PDS-NK aluminum channel is a recessed profile housing for LED strip lights up to 14mm wide with a small exposed bezel for an appealing look. The recessed design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with an optional clear or frosted lens. Choose silver anodized, black, or white in 3.3ft (1m) or 6.6ft (2m) lengths.
  3. B4370ANODA Dimensional Drawing

    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - 1m / 2m Part Number: B4370ANODA
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  4. B4476ANODA Dimensional Drawing

    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - 1m / 2m Part Number: B4476ANODA
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  5. NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m

    $43.99 ea.
    NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m Part Number: 18026NA
    In stock
    Use the KLUS® NISA-KRA Aluminum Channel for lighting niches and suspended ceilings. Consisting of the TENIKRA mounting strip and ONISA extrusion, the NISA-KRA can be mounted horizontally or vertically with screws and houses a single LED strip up to 10mm wide. The step-shaped TENIKRA strip allows for drywall edge mounting and, once sealed, forms a thin finished edge. Available in 3.3 ft (1m) and 6.6 ft (2m) lengths with an optional clear or frosted lens.
  6. C1419 Dimensional Drawing

    $42.99 ea.
    MICRO-HG Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: C1419
    In stock
    KLUS® designed their MICRO-HG Aluminum Channel to minimize glare for optimal visual comfort with LED strip lights up to 11mm wide.Use with an optional lens, clear for greater efficiency and optimal brightness, or frosted for diffused lighting. Available in 3.3 ft (1m) or 6.6 ft (2m) lengths in anodized silver or black.
  7. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  8. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  9. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  10. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  11. Silver and white GIZA-LL aluminum channels with optional frosted lenses

    $61.99 ea.
    GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: C0758
    In stock
    The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for "line of light" illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach an IP67 rating when sealed with optional accessories. Available in 3.3ft (1m) or 6.6ft (2m) lengths, white or silver anodized.
  12. MICRO-NK silver anodized aluminum LED strip channel - low profile flush mount with bezel

    $13.99 ea.
    MICRO-NK Aluminum Channel - Recessed - For Strips Up To 11mm - 1m / 2m Part Number: C1587
    In stock
    The KLUS® MICRO-NK aluminum channel is a low-profile (6mm height) recessed extrusion for LED strip lights up to 11mm wide with an exposed bezel for an appealing presentation. KLUS designed this recessed extruded aluminum channel to reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths, silver anodized or black, with an optional clear or frosted lens.
  13. View all

    All Accessories

    1 additional compatible accessories

  1. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W

    $19.99 ea.
    Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-S
    In stock
    24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.
  3. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  4. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  5. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  6. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  7. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  8. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  9. Dimmable LED Driver - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V

    $39.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V Part Number: CVPSD-xWP-24V-JB
    In stock
    DiodeDrive Constant Voltage LED Driver is a Class 2 power supply for indoor lighting systems with a max wattage of 25 or 60. with 2 entry point screw terminals, as well as 6 knockouts, wire access is easy and shielded in a durable, vented enclosure. Built-in features include a junction box, as well as short-circuit, overload, and over-temperature protection. Optional 6ft power cord has a 5-15 plug.
  10. Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V

    $99.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V Part Number: CVPSD-120WM-24V-JB-x
    In stock
    DiodeDrive Constant Voltage 120W LED Driver can effectively power strip lights, light bars, and more, up to 120-watts. This power supply has an integrated junction box, as well as short-circuit, overload, and over-temperature protection. It has 6 total knockouts, for easy powering access. Shielded in a durable, vented enclosure, the TRIAC dimmable device runs cool in both indoor and outdoor settings. Optional 6ft power cord has a 5-15 plug.
  11. Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V

    $129.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V Part Number: CVPSD-200WM-24V-JB-x
    In stock
    Effectively power tape lights, linear bars, and more with DiodeDrive Constant Voltage 200W LED Driver. Housed in a durable, vented enclosure, the black ETL power supply runs cool in both indoor and outdoor applications. Designed with a built in junction box, as well as short-circuit, overload, and over-temperature protection. with 7 knockouts and easy wiring access, this TRIAC dimmable device has compact utility for residential and commercial use. Optional 6ft power cord has a 5-15 plug.
  12. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  13. View all

    24V Power Supplies

    12 additional compatible accessories

  1. GIZA aluminum channels with flat lenses

    $16.99 ea.
    GIZA Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: B5556ANODA
    In stock
    The KLUS® GIZA Aluminum Channel can house LED strip lights up to 20mm wide and provide a single diffused "line of light" with an optional lens. It has multiple surface mount installation options and can reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths with an optional flexible or rigid frosted lens.
  2. PDS-NK LED aluminum strip channel - flush mount - 13mm

    $15.99 ea.
    PDS-NK Aluminum Channel - Recessed - For Strips Up To 14mm - 1m / 2m Part Number: C1588
    In stock
    The KLUS® PDS-NK aluminum channel is a recessed profile housing for LED strip lights up to 14mm wide with a small exposed bezel for an appealing look. The recessed design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with an optional clear or frosted lens. Choose silver anodized, black, or white in 3.3ft (1m) or 6.6ft (2m) lengths.
  3. B4370ANODA Dimensional Drawing

    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - 1m / 2m Part Number: B4370ANODA
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  4. B4476ANODA Dimensional Drawing

    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - 1m / 2m Part Number: B4476ANODA
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  5. NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m

    $43.99 ea.
    NISA-KRA Aluminum Channel - Cove - For Strips Up To 10mm - 1m / 2m Part Number: 18026NA
    In stock
    Use the KLUS® NISA-KRA Aluminum Channel for lighting niches and suspended ceilings. Consisting of the TENIKRA mounting strip and ONISA extrusion, the NISA-KRA can be mounted horizontally or vertically with screws and houses a single LED strip up to 10mm wide. The step-shaped TENIKRA strip allows for drywall edge mounting and, once sealed, forms a thin finished edge. Available in 3.3 ft (1m) and 6.6 ft (2m) lengths with an optional clear or frosted lens.
  6. C1419 Dimensional Drawing

    $42.99 ea.
    MICRO-HG Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: C1419
    In stock
    KLUS® designed their MICRO-HG Aluminum Channel to minimize glare for optimal visual comfort with LED strip lights up to 11mm wide.Use with an optional lens, clear for greater efficiency and optimal brightness, or frosted for diffused lighting. Available in 3.3 ft (1m) or 6.6 ft (2m) lengths in anodized silver or black.
  7. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  8. Silver and white GIZA-LL aluminum channels with optional frosted lenses

    $61.99 ea.
    GIZA-LL Aluminum Channel - Surface - For Strips Up To 20mm - 1m / 2m Part Number: C0758
    In stock
    The KLUS® GIZA-LL Aluminum Channel is a shallow extrusion for constructing primary or decorative lighting fixtures. The GIZA-LL can house one or two 10mm LED strip lights or a single strip up to 20mm wide. Use the optional frosted LIGER-22 cover and an LED strip with a minimum of 40 LEDs/ft for "line of light" illumination. This profile channel has multiple installation options and can be bent within its minimum radius to create regular and irregular curves for decorative fixtures. It can reach an IP67 rating when sealed with optional accessories. Available in 3.3ft (1m) or 6.6ft (2m) lengths, white or silver anodized.
  9. MICRO-NK silver anodized aluminum LED strip channel - low profile flush mount with bezel

    $13.99 ea.
    MICRO-NK Aluminum Channel - Recessed - For Strips Up To 11mm - 1m / 2m Part Number: C1587
    In stock
    The KLUS® MICRO-NK aluminum channel is a low-profile (6mm height) recessed extrusion for LED strip lights up to 11mm wide with an exposed bezel for an appealing presentation. KLUS designed this recessed extruded aluminum channel to reach a waterproof rating for wet area use. Available in 3.3ft (1m) or 6.6ft (2m) lengths, silver anodized or black, with an optional clear or frosted lens.
  10. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver (1m only).
  11. TAMI aluminum channels with frosted lenses

    $9.99 ea.
    TAMI Aluminum Channel - Surface - For Strips Up To 12mm - Silver - 1m / 2m Part Number: B5390ANODA-Frosted Cover
    In stock
    The KLUS® TAMI aluminum channel offers a professional mounting solution for surface mounting LED strip lights up to 12mm wide. The low-profile (7mm deep) extruded aluminum channel can reach a waterproof rating for wet areas when sealed. The included frosted lens provides smooth lighting with less visible hot spots. Available in anodized or non-anodized silver in lengths of 3.3ft (1m) or 6.6ft (2m).
  12. C1919 Dimensional Drawing

    $14.99 ea.
    TAPO Aluminum Channel - Surface - For Strips Up To 10mm - 1m / 2m Part Number: C1919
    In stock
    KLUS® designed their TAPO Aluminum Channel as a simple, economical profile housing for LED strip lights up to 10mm wide for full cover illumination. Use the TAPO strip channel with the included T-Cover lens and end caps to make simple fixtures with various applications.
  13. View all

    Channels

    28 additional compatible accessories

  1. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  3. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  4. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  5. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  6. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  7. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  9. Magnitude Dimmable LED Power Supply

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  10. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $49.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  1. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  2. View all

    Connectors

    17 additional compatible accessories

  1. SLVD-60W - LED Dimmer for Standard Wall Switch Box

    $22.99 ea.
    LED Switch and Dimmer for Standard Wall Switch Box - 60W Max Part Number: SLVDx-60W
    In stock
    LED switch and dimmer combo designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
  2. View all

    Controllers

    50 additional compatible accessories

Reviews

4.9 / 5 stars
55 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m White LED Strip Light - Radiant Series LED Tape Light - 12V / 24V - IP20

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.