Name: 5m RGBA Tunable White LED Strip Light - Color-Changing LED Tape Light - 24V - IP20 - RGB+ACCT - 196.9in (16.40ft)
Brand: Super Bright LEDs
SKU: STN-L80-A12A-15J5M-24V
Price: 232.99 USD
Availability: InStock
Rating: 4 (1 reviews)

Overview

This flexible LED strip light produces bold, brilliant illumination with RGBA color-changing and tunable white lights, and is ideal for advanced lighting design, displays, and stage lighting. Use a DMX controller to adjust settings and customize a unique display of seamlessly blended color tones. Peel-and-stick 3M™ adhesive backing enables fast, easy mounting. Backed by a lifetime warranty.

Product Details:

24 VDC input
Maximum run up to 5m
29 LEDs/ft
Strip width measures 15mm
3M™ adhesive backing for surface mounting
Pigtail connection
0-100% dimmable
Lifetime exceeds 50000 hours
CE certified and UL listed
Lifetime warranty

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

LED Backlights
Accent Lighting
Off Grid Lighting
Coves
Under-Cabinets
Display Cases
Trade Shows

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
Brightness	387 lm/ft (1270 lm/m)
CCT Value	1600K, 3000-6500K
Certifications/Compliance	CE, UL Listed
Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	RGB+Amber+Tunable CCT
CRI	80+
Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	4.8 A
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	293mA
Dimmable	Yes
Efficacy	55 lm/W
Environmental Rating Learn more about environmental rating	Non-weatherproof, Suitable for Dry Locations
Finish	White
IP Rating	IP20
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Density	29 LEDs/ft
LED Type	5050 SMD
LEDs per Segment	12
Length	16.4ft (5m)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Up to 13.1ft (4m)
Minimum Cut Length	125mm (4.92in)
Operating Voltage	24 VDC
Power Consumption	115 Watts
Rated Life (L70)	50000 Hours
Series	DynamicColor
Strip Width	15mm (0.59in)
Wattage per Foot	7 W/ft (23 W/m)
Wire Length	508mm (20in)

Print Specifications

Accessories & Power Supplies

All Accessories

Channels

24V Power Supplies

Installation Supplies

Accessories Links

Accessory Category

Accessory Type:

$4.99 ea.

3M Adhesion Promoter - Single Pack Part Number: 06396
In stock

3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.

Reviews

80%

4 / 5 stars

1 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m RGBA Tunable White LED Strip Light - Color-Changing LED Tape Light - 24V - IP20 - RGB+ACCT - 196.9in (16.40ft)

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

5m RGBA Tunable White LED Strip Light - Color-Changing LED Tape Light - 24V - IP20 - RGB+ACCT - 196.9in (16.40ft)

Features

Product Photos

Videos