Name: 3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W - DS-DMX36
Brand: Super Bright LEDs
SKU: DS-DMX36
Price: 49.99 USD
Availability: InStock

Overview

DS series 3 Channel DMX Decoder allows up to 3 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-directional communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 3 channels, it allows a max of 6A and 144W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.

Product Details:

12 VDC, 24 VDC
Green terminal DMX signal IN and OUT
Max load current 18A
PWM frequency 2000/500Hz selectable
Operating temperature: -22°–131° F (-30°–55° C)
CE certificate
Protected against: overheat, overload, and short circuit protection
Rated IP20 for dry locations

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Amps Per Channel	6 Amps/CH
Channels	3 Channels
Control Type	DMX512
DMX In/Out	Screw Terminals
Input Connection Type	Screw Terminals
IP Rating .	IP20
Max Input Current	18.5 A
Operating Temperature	-30~+55 °C (-22~+131 °F)
Output Current Draw per Channel	6 A per channel (x3)
Standards And Certifications	CE
Voltage	12-24 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

DMX Adapters

DMX Connectors

DMX Cables

Wiring

DMX Terminators

12V Power Supplies

24V Power Supplies

Accessories Links

Accessory Category

Accessory Type:

$2.99 ea.

DMX 3-Pin Male XLR3 Cable Connector Part Number: DMX3M
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin male XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Female XLR3 Cable Connector Part Number: DMX3F
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin female XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Male XLR5 Cable Connector Part Number: DMX5M
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin male XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Female XLR5 Cable Connector Part Number: DMX5F
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin female XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.

$3.99 ea.

DMX Terminator for XLR3 - Single Part Number: DMX3T
In stock

The DMX terminator plugs into any XLR 3-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.
$6.99 ea.

DMX Terminator for XLR5 - Single Part Number: DMX5T
In stock

The DMX terminator plugs into any XLR 5-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.

$49.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
In stock

Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
$46.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
In stock

DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
$21.99 ea.

LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
In stock

This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W - DS-DMX36

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W - DS-DMX36

Features

Product Photos

Overview

Specifications