Outdoor Single-Color LED Strip Light - Super Flexible with Through Hole LEDs - 12V - Waterproof IP67 - 1m

Part Number:
WFLB-x96-C
Manufacturer Part Number:

calcActive())">
Starting at
$22.99
ea.
Starting at
Was
In Stock
Features
- Side emitting & conforms to most shapes
- Can be cut every 1"
- 1m (3.3ft) with 85 Lumens/ft
- Waterproof for outdoor use
- 0-100% Dimmable
Loading recommendations...
Overview
This super-flexible, waterproof LED strip light operates on 12 VDC. Using 5-mm through hole LEDs, it emits up to 85 lumens of UV (blacklight), green, or red illumination per foot. The 3.2' side-emitting LED light strip is completely encapsulated in rubber, can be easily cut into separate 3-LED segments, and will conform to most shapes up to a 0.25" radius. Each strip has a 20" power wire on both ends for connecting multiple units together. It will appear at full brightness for 10,000 hours. After 10,000 hours of use, a decline in lumen output might be noticeable. Mount using the included 4 mounting clips and screws. This LED strip light is great for landscape lighting, vehicles, boats, marine lighting, and many more indoor or outdoor applications.
Product Details:
- Waterproof for outdoor use
- 0-100% Dimmable
- 4 mounting clips and screws included
- 12 VDC
- 5-Year warranty
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
203mA |
---|---|
Dimmable | Yes |
Dimmer Type | PWM |
Environmental Rating
Environmental Rating
![]() |
Suitable for Wet Locations, Waterproof |
Finish | Copper |
Input Connection Type | Pigtail |
IP Rating
IP Rating
![]() |
IP67 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
![]() |
80° |
LED Density | 30 LEDs/ft |
LED Type | 5mm |
LEDs per Segment | 3 |
Length | 3.3 ft (1 m) |
LED Lifetime | 10000 Hours |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. ![]() ![]() |
Up to 9.5ft (2.9m) |
Minimum Cut Length | 30mm (1.2in) |
Operating Voltage | 9-14.8 VDC |
Series | Eco |
Strip Width | 13.5mm (0.53in) |
Wattage | 7.7 Watts |
Wattage per Foot | 2.5 W/ft |
Wire Length | 1.6 ft (48.7 cm) |
Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
LED Color |
---|---|---|
WFLB-G96 | 640 mA | Green |
WFLB-O96 | 640 mA | Orange |
WFLB-R96 | 530 mA | Red |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs