LED Hideaway Strobe Lights - Mini Emergency Vehicle LED Warning Lights with Built-In Controller - Surface or Flush Mount
Part Number:
DMSTRB-x6
Manufacturer Part Number:
calcPageSize())"
/>
calcPageSize())"
class="absolute inset-0 object-contain object-center w-full m-auto max-h-screen-75"
:class="{ 'cursor-pointer': !fullscreen }"
width="700"
height="700"
:loading="active!==index ? 'lazy' : 'eager'"
:src="fullscreen ? image.full : image.img"
x-transition.opacity.duration.500ms x-show="active===index"
/>
calcActive())">
Starting at
$24.99
ea.
Starting at
Was
Features
- 18 strobe patterns
- Synchronize strobe patterns with up to 3 additional lightheads
- Meets or exceeds SAE J595 Class 1
- Rugged construction resists vibration and rough road conditions
- Available in single and models
- 12-24 VDC
- Lifetime warranty
Loading recommendations...
Overview
These LED hideaway strobe lights are SAE J595 Class 1 certified for use as police lights, emergency vehicle lights, fire truck lights, or ambulance lights, and they can also be used on maintenance, service, or construction vehicles. The vehicle strobe lights can be flush mounted with the included rubber gasket (0.90" hole) or surface mounted with the gasket and L-bracket. They emit bright white, red, amber, alternating amber/white, or alternating blue/red illumination. The LED hideaway lights feature 18 flash patterns that can be synchronized between 4 strobes and easily controlled with a compatible switch. A weatherproof aluminum housing and polycarbonate lens are built to withstand impact with road debris and exposure to wet conditions. Mount the waterproof lights in exterior or interior vehicle locations, such as headlight or tail light housings, running boards, grilles, bumpers, front or rear windows, door panels, and more. Installation hardware is included. The durable LED lights operate within a wide 12-24 VDC range.
Applications:
- Emergency Vehicles
- Farm Equipment
- Hazard Lights
- Law Enforcement
- Public Safety Vehicles
- Roadside Assistance Vehicles
- Utility Vehicles
- Warning Lights
- Waste Removal Vehicles
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
---|---|
Brand | Super Bright LEDs |
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
120 mA |
Finish | Black |
Input Connection Type | Pigtail |
Input Voltage | 12-24 VDC |
IP Rating
IP Rating
|
IP67 |
LED Type | 3535 SMD |
Mount Type | Bracket |
Product Materials | Aluminum, Polycarbonate |
Warranty | Lifetime |
Wattage | 6 Watts |
Part NO | Certifications/Compliance | LED Color | Series |
---|---|---|---|
DMSTRB-A6 | CE, DOT Compliant, SAE Class 1 | Amber | |
DMSTRB-A6-4PK | CE, DOT Compliant, SAE Class 1 | Amber | |
DMSTRB-AW6 | CE, DOT Compliant, SAE Class 1 | Amber / White | |
DMSTRB-AW6-4PK | CE, DOT Compliant, SAE Class 1 | Amber / White | |
DMSTRB-R6 | CE, DOT Compliant, SAE Class 1 | Red | |
DMSTRB-R6-4PK | CE, DOT Compliant, SAE Class 1 | Red | |
DMSTRB-RB6 | CE, DOT Compliant, SAE Class 1 | Red / Blue | |
DMSTRB-RB6-4PK | CE, DOT Compliant, SAE Class 1 | Red / Blue | |
DMSTRB-W6 | CE, DOT Compliant, SAE Class 1 | White | |
DMSTRB-W6-4PK | CE, DOT Compliant, SAE Class 1 | White |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs