Square LED truck and trailer lights combo box with license plate lights - 4-1/2" stop / turn / tail lights - universal stud mount - 17 LEDs

Square LED Truck and Trailer Lights Combo Box with License Plate Lights - 4-1/2" Stop / Turn / Tail Lights - Universal Stud Mount - 17 LEDs

Part Number
TLS-RHP17

Features

  • Two light units included
  • Side LEDs for license plate lighting
  • IP66 weatherproof rated sealed construction
  • Surface mount hardware included
  • DOT, SAE, CE, and RoHS compliant
  • Lifetime warranty
View more details
In Stock
$49.99 per Pair

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Loading...

Overview

This 4-1/2" square 17 LED trailer light kit meets DOT FMVSS 108 requirements for use as turn signal lights, side reflectors, stop lights, and tail lights and includes both right-hand and left-hand lamps along with stainless steel mounting hardware. The left unit features white LEDs for license plate lighting. A sonically sealed polycarbonate lens and weatherproof housing allow for use in harsh outdoor conditions. A wiring and installation kit is also available (see accessories).

Dimensions: 5.49" (13.95cm) x 1.89" (4.8cm) x 4.49" (11.4cm)

Product Details:

  • Durable plastic housing
  • Sealed polycarbonate lens
  • IP66 rated
  • Universal stud mount
  • Pigtail connector
  • 12 VDC range
  • CE, DOT, SAE, and RoHS compliant
  • Lifetime Warranty
CE
CE
DOT
DOT
Lifetime
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Tail Lights
  • Brake Lights
  • Utility Vehicles
  • Flatbed Truck Lights
  • RV Lights
  • Campers
  • Public Safety Vehicles
  • Wide Load Transport Light
  • Security Vehicle Lighting

Specifications

Current Draw 0.14A (140mA), 0.29A (290mA)
DOT Standard FMVSS 108
IP Rating IP66
Mount Type Stud
Standards And Certifications CE, DOT Compliant
Voltage 12 VDC
PC Rated No
Print Specifications

Accessories & Power Supplies

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  4. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  5. View all

    All Accessories

    1 additional compatible accessories

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  4. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  5. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  6. View all

    Installation Supplies

Reviews

4.7 / 5 stars
43 reviews

Write Your Own Review

Write a Review

You're reviewing: Square LED Truck and Trailer Lights Combo Box with License Plate Lights - 4-1/2" Stop / Turn / Tail Lights - Universal Stud Mount - 17 LEDs

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.