Name: 4" Low Voltage Brass Down Light - 12V - LED Ready Fixture with RGB+CCT MR16 Bulb - Optional RF Remote
Brand: Super Bright LEDs
SKU: WSR-LRR-RGBMR16-V-x
Price: 68.95 USD
Availability: OutOfStock

Overview

Description

The 4” up or down drop-in landscape fixture has a corrosion resistant solid brass housing designed for outdoor applications. The included RGB + tunable white MR16 bulb has various color-changing and tunable white modes. Adjust speed, brightness, saturation, and bulb color with the remote or smart device using the Wi-Fi Hub. Bulb is equipped with a memory setting and will return to the selected mode prior to being powered off. To prevent water intrusion, the fixture is sealed with a weathertight silicone o-ring. The 12V down light is versatile and can be used as downlighting on deck posts or landscape lighting. Connect the down light to the existing 12V landscape system, or pair with a low-voltage transformer for a new system. Can be mounted for up or down lighting. Installation hardware is included.

Also available with a single-color MR16 bulb or as a fixture only.

Product Details:

Control up to 8 light groups with RF remote or MiBoxer app
RF remote has a 100’ communication range
Solid brass housing with a glass lens
25° beam angle
IP54 waterproof rating
Surface mount using the included hardware
12V AC/DC
5-year warranty

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Deck Lighting
Deck posts
Houseboat Lighting
Landscape Lighting
RV, Campers and Motorhomes

Specifications

Beam Angle Spot Lights Spot lights give off a narrow and concentrated beam of light that allows for greater visibility at further distances. With light output stretching beyond that of standard headlights. Spot lights are best used to navigate dark back roads for everything from recreational vehicles to work trucks and search and rescue vehicles. Flood Lights Flood lights are best at illuminating a wider area at a shorter distance than typical headlights. These are great for use on vehicles performing tasks at night such as roadwork or harvesting, as well as use on curvy roads and side roads. Combo Beams Combo vehicle lights are a combination of a spot light and a flood light that are always on simultaneously. This allows for the light to cover both short and long distances at the same time for a variety of tasks. Selectable Multibeams Selectable multibeams contain both a spot light and a flood light. With this, you gain the ability to have either the spot light or the flood light, or both on at the same time. Selectable multi-beams are extremely versatile in that you get three beam patterns in a single light. However it does require additional wiring to operate both beams independently through either multiple rocker switches, or a momentary switch. Combo + Side Shooters Side shooters illuminate a full 180 degrees or more through the use of a combo beam vehicle light. Side shooters contain an extra row of vertically or horizontally stacked and angled LED lights. This row is what gives the side shooter the ability to expand beyond a normal flood light's field of view. Side shooters are best used while stationary or at very low speeds where the field of view is critical.	25°
Bulb Type	GU5.3 (MR16)
CCT Value	2700-6500K
Current Draw	330 mA
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	Remote
Equivalency	35 Watt Halogen
Finish	Bronze
Hub Required	Optional
Intensity	280 Lumen
IP Rating	IP54
LED Color	RGB+Tunable White
Mount Type	Surface
Operating Voltage	12V AC/DC
Power Consumption	4 Watts
Product Materials	Brass Housing, Glass Lens
Supported Smart Phone Apps	MiBoxer
Warranty	5 Year
Wire Gauge	18 AWG

Print Specifications

Need a different style of landscape lighting?

Accessories & Power Supplies

All Accessories

Wiring

Installation Supplies

Accessories Links

Accessory Category

Accessory Type:

$0.29 per Foot

18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
$0.45 ea.

22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
$0.69 per Foot

PVC Jacketed 18 Gauge Wire - Two Conductor Power Wire - Part Number: WP18-2CMR
In stock

UL listed jacketed power wire for low voltage installations. Two conductor 18 gauge stranded wire insulated in PVC jacket. Price per foot.

$0.29 per Foot

18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
$0.69 per Foot

PVC Jacketed 18 Gauge Wire - Two Conductor Power Wire - Part Number: WP18-2CMR
In stock

UL listed jacketed power wire for low voltage installations. Two conductor 18 gauge stranded wire insulated in PVC jacket. Price per foot.

$0.45 ea.

22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.

Reviews

0%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 4" Low Voltage Brass Down Light - 12V - LED Ready Fixture with RGB+CCT MR16 Bulb - Optional RF Remote

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

4" Low Voltage Brass Down Light - 12V - LED Ready Fixture with RGB+CCT MR16 Bulb - Optional RF Remote

Features

Product Photos