| Part NO | Finish | LED Color | Series |
|---|---|---|---|
| SF-A16R (Amber) | Amber | Amber | |
| SF-A16R-6PK (Amber) | Amber | Amber | |
| SF-AW16R (Amber White) | Amber, White | Amber / White | |
| SF-AW16R-6PK (Amber White) | White | Amber / White | |
| SF-B16R (Blue) | Blue | Blue | |
| SF-B16R-6PK (Blue) | Blue | Blue | |
| SF-G16R (Green) | Green | Green | |
| SF-G16R-6PK (Green) | Green | Green | |
| SF-R16R (Red) | Red | Red | |
| SF-R16R-6PK (Red) | Red | Red | |
| SF-RB16R (Red Blue) | Blue, Red | Red / Blue | |
| SF-RB16R-6PK (Red Blue) | Blue | Red / Blue | |
| SF-W16R (White) | White | White |
To turn on the flare press the ON/OFF switch on the top side of the flare. The 9 different operating modes can be selected by repeatedly pressing the ON/OFF switch. Hold the ON/OFF switch for approx. 2 seconds to turn off the flare, press ON/OFF switch again to activate last retained mode.
| Rotate | 6 Hours |
| Quad Blink | 14 Hours |
| Slow Blink | 60 Hours |
| Alternate | 3 Hours |
| SOS | 4 Hours |
| Solid Low | 32 Hours |
| Solid High | 2.5 Hours |
| Steady On (2 LEDs) | 12 Hours |
| Steady On (4 LEDs) | 6.5 Hours |
Connect the provided charging unit to the bottom of the flare (side with magnet) and ensure correct orientation (+/-). The magnet of the flare will hold the charging unit in place (can also be used to attach the flare to metal surfaces). Connect the USB cable between the side of the charging unit and either the 110VAC 60Hz power plug or the circular vehicle adapter plug (12 VDC) depending on which power source you will use for charging. While charging the LED on the charging unit will glow red. Once the battery is completely charged (takes approx. 6 hours when battery is completely dead) the charger will switch to trickle charging mode and the LED will glow green.
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
