Mini Emergency LED Light Bar - Permanent Mount
Part Number
STMB-x30
Customers Also Viewed
Overview
Description
The STMB series Mini Emergency LED Light Bar provides safety alerting for emergency and roadside assistance vehicles. Select from six flash patterns that can be controlled with a compatible switch, Magnetic mount version also available.
Product Details:
- Included installation hardware
- 30 LEDs
- Rated IP67 for wet conditions
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Emergency Vehicle Lighting
- Waste Removal Vehicles
- Roadside Assistance Vehicles
- Tractors
- Public Safety Vehicles
Specifications
| Beam Angle | 360° |
|---|---|
| Current Draw | 1.2 A |
| Finish | Black |
| Connector | Pigtail |
| IP Rating | IP67 |
| Size | 16.5in (1.37ft) |
| Material | Aluminum |
| Ambient Operating Temperature | -30~+60 °C (-22~+140 °F) |
| Voltage | 12-24 VDC |
.Swipe left to see additional specifications
Basic STMB-A30 Wiring Diagram
Accessories & Power Supplies
Accessories Links
Accessory Category-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Single Output - DT Connector Part Number: WH-DTS10In stockThe single-output LED light wiring harness with switch, and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 18 Amps. Wiring harness for 12V products only.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Dual Output - DT Connector Part Number: WH-DTD15In stockThe dual-output LED light wiring harness with switch and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 5.5 Amps per channel. Wiring harness for 12V products only. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$2.99 ea.12V DC 30/40A 5 PIN Universal Relay - 5 Pin Relay Part Number: R5-SPDT-1240In stock40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
-
$1.99 ea.5 Pin Relay Socket - Pigtail Connection - 5 Pin Relay Socket Part Number: R5-SWIn stockPre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
-
$3.99 / setRound Rocker Switch and Flash Mode Control - Flash Controller Part Number: SWK-PMIn stockOn/Off Round Rocker Switch and Momentary Push Button Switch for Flash Mode Control. Includes 16" wiring.
Rocker Switch: 15 Amp Max at 12VDC, 10 Amp Max at 24VDC. Mounting hole 13/16" diameter and fits panels up to 1/8" thick maximum. Dimensions: 23.2mm(0.91") x 23.2mm(0.91") x 30.5mm(1.2")
Momentary Switch: 5 Amp Max at 12VDC, 3 Amp Max at 24VDC. Mounting hole 5/8" diameter and fits panels up to 1/8" thick maximum. Dimensions: 18.5mm(0.73") x 18.5mm(0.73") x 24.1mm(0.95")
Priced as a set. -
$4.99 ea.LED Indicator Push Button Switch Part Number: PB-x-SPDT-xIn stockSingle pole double throw Push Button ON/OFF switch with LED indicator. Light press for momentary action, longer press latches on. with Common, NO, NC and LED solder lug connections. LED indicator uses 20mA@12VDC, contacts rated for 3A@250VAC, 6A@12VDC. Includes O-ring and mounting nut.
-
$14.99 ea.3-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 30 Amps - 3 Switch Part Number: ASP-4MIn stockThis rocker switch panel helps organize 12 VDC LED light switches or other low-voltage electrical application switches in your boat, truck, RV, UTV, ATV, or car. It's great for work lights, light bars, strobes, and more. The DC distribution panel has 3 red illuminated rocker switches and 1 momentary switch for changing strobe modes. Each switch is rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with negative- or positive-triggered lights. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$8.99 ea.1-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 10 Amps - 1 Switch Part Number: ASP-2MIn stockThis rocker switch lets you control a work light, light, bar, strobe light, or other LED light in your boat, truck, RV, UTV, ATV, or car. The DC distribution panel has 1 red illuminated rocker switch and 1 momentary switch for changing strobe modes. It's rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with a negative- or positive-triggered light. -
$18.99 ea.4-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 40 Amps - 4 Switch Part Number: ASP-5MIn stockThis rocker switch panel helps organize 12 VDC LED light switches or other low-voltage electrical application switches in your boat, truck, RV, UTV, ATV, or car. It's great for work lights, light bars, strobes, and more. The DC distribution panel has 4 red illuminated rocker switches and 1 momentary switch for changing strobe modes. Each switch is rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with negative- or positive-triggered lights.
-
$3.99 / setRound Rocker Switch and Flash Mode Control - Flash Controller Part Number: SWK-PMIn stockOn/Off Round Rocker Switch and Momentary Push Button Switch for Flash Mode Control. Includes 16" wiring.
Rocker Switch: 15 Amp Max at 12VDC, 10 Amp Max at 24VDC. Mounting hole 13/16" diameter and fits panels up to 1/8" thick maximum. Dimensions: 23.2mm(0.91") x 23.2mm(0.91") x 30.5mm(1.2")
Momentary Switch: 5 Amp Max at 12VDC, 3 Amp Max at 24VDC. Mounting hole 5/8" diameter and fits panels up to 1/8" thick maximum. Dimensions: 18.5mm(0.73") x 18.5mm(0.73") x 24.1mm(0.95")
Priced as a set. -
$4.99 ea.LED Indicator Push Button Switch Part Number: PB-x-SPDT-xIn stockSingle pole double throw Push Button ON/OFF switch with LED indicator. Light press for momentary action, longer press latches on. with Common, NO, NC and LED solder lug connections. LED indicator uses 20mA@12VDC, contacts rated for 3A@250VAC, 6A@12VDC. Includes O-ring and mounting nut.
-
$14.99 ea.3-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 30 Amps - 3 Switch Part Number: ASP-4MIn stockThis rocker switch panel helps organize 12 VDC LED light switches or other low-voltage electrical application switches in your boat, truck, RV, UTV, ATV, or car. It's great for work lights, light bars, strobes, and more. The DC distribution panel has 3 red illuminated rocker switches and 1 momentary switch for changing strobe modes. Each switch is rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with negative- or positive-triggered lights.
-
$8.99 ea.1-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 10 Amps - 1 Switch Part Number: ASP-2MIn stockThis rocker switch lets you control a work light, light, bar, strobe light, or other LED light in your boat, truck, RV, UTV, ATV, or car. The DC distribution panel has 1 red illuminated rocker switch and 1 momentary switch for changing strobe modes. It's rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with a negative- or positive-triggered light.
-
$18.99 ea.4-Position LED Rocker Switch Panel with Momentary Switch - DC Distribution Switch Panel - 12 VDC - 40 Amps - 4 Switch Part Number: ASP-5MIn stockThis rocker switch panel helps organize 12 VDC LED light switches or other low-voltage electrical application switches in your boat, truck, RV, UTV, ATV, or car. It's great for work lights, light bars, strobes, and more. The DC distribution panel has 4 red illuminated rocker switches and 1 momentary switch for changing strobe modes. Each switch is rated for 10 amps max per switch. The powder coated aluminum rocker switch can be used with negative- or positive-triggered lights.
-
$2.99 ea.12V DC 30/40A 5 PIN Universal Relay - 5 Pin Relay Part Number: R5-SPDT-1240In stock
40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
-
$1.99 ea.5 Pin Relay Socket - Pigtail Connection - 5 Pin Relay Socket Part Number: R5-SWIn stock
Pre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Single Output - DT Connector Part Number: WH-DTS10In stock
The single-output LED light wiring harness with switch, and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 18 Amps. Wiring harness for 12V products only.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Dual Output - DT Connector Part Number: WH-DTD15In stockThe dual-output LED light wiring harness with switch and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 5.5 Amps per channel. Wiring harness for 12V products only.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
Reviews
5 / 5 stars
14 reviews
5 / 5 stars
14 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*