Single Color LED Controller with Dynamic Modes - RF Remote - Mini Single Color LED Controller
Part Number
MCBRF-4A
Overview
Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Similar Single Color LED Remote Controls
| Control Type | Amps | Channels | Amps Per Channel | Special Features | Price | ||
|
Handheld (RF) Remote
|
8 Amps
|
1 Channel
|
8 Amps/CH
|
Remote Control
|
$12.99
ea.
|
|
|
Handheld (RF) Remote
|
5 Amps
|
1 Channel
|
5 Amps/CH
|
|
$10.99
ea.
|
|
|
Handheld (RF) Remote
|
15 Amps
|
1 Channel
|
15 Amps/CH
|
Strobe and Fade
|
$24.99
ea.
|
|
Specifications
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders. -
$49.99 ea.Mean Well LED Switching Power Supply - LPV Series 150W Single Output LED Power Supply - 24V DC - 200-277 VAC - 150W Part Number: LPV-150-24In stockThe DC LPV Series 150W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 24V DC Part Number: APV-x-24In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xWIn stockPower Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
View all
All Accessories1 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$49.99 ea.Mean Well LED Switching Power Supply - LPV Series 150W Single Output LED Power Supply - 24V DC - 200-277 VAC - 150W Part Number: LPV-150-24In stockThe DC LPV Series 150W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 24V DC Part Number: APV-x-24In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xWIn stockPower Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector. -
$33.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V Part Number: CVPS-xWH-24VIn stockDiodeDrive Class 2 switching power supply is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Guaranteed with a 7 year warranty, the reliable device is designed for constant voltage operation. Widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
$119.99 ea.Magnitude Dimmable LED Driver - Super Compact - 24 Volt Part Number: ExR24DCIn stockThe Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 96 watts. The 24-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only). -
$38.99 ea.Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 24V Dimmable Part Number: PWM-x-24In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$53.99 ea.Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed LED Power Supply with Built-in PFC - 24V DC Part Number: RSP-x-24In stock* Universal AC input / Full range
* Built-in active PFC function, PF>0.93
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Built-in constant current limiting circuit
* Remote ON-OFF control(Optional)
* LED indicator for power on
* 100% full load burn-in test
* Fixed switching frequency at PFC:67KHz PWM:134KHz
* 3 years warranty
* Made by Mean Well
-
$389.99 ea.Mean Well LED Switching Power Supply - SE Series 1500W Enclosed Power Supply - 24V DC Part Number: SE-1500-24-xIn stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
View all
24V Power Supplies16 additional compatible accessories
-
$3.99 ea.12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-DIn stockUse this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders.
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
$129.99 ea.Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 12V Part Number: CVPSD-200WM-12V-JB-xIn stockDiodeDrive Constant Voltage 200W LED Driver can effectively power lights that require low voltage, such as strip lights and linear light bars. with a max wattage of 100 per outlet, this TRIAC dimmable device protects against short-circuit, overload, and heat build up. The durable, vented enclosure protects the inner components for indoor or outdoor use. Designed with 2 outputs and 7 total knockouts, wire access is easy. Select to include the optional power cord for simplified installation. -
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$114.99 ea.Magnitude Dimmable LED Driver - Compact - 12 Volt Part Number: ExL12DCIn stockThe compact Magnitude dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Includes 2 knock-outs for easy wire access as well as auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. -
$109.99 ea.Magnitude Dimmable LED Driver - Super Compact - 12 Volt Part Number: ExR12DCIn stockThe Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 60 watts. The 12-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. -
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and over-voltage and has a 5.5mm barrel connector output and standard 1-15P 120 VAC input. Available in 18 or 25-watt maximum output. -
View all
12V Power Supplies22 additional compatible accessories
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
Reviews
4.2 / 5 stars
82 reviews
4.2 / 5 stars
82 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*