Rigid linear RGB LED light bars are an extremely versatile solution for a variety of lighting needs, such as cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, or other indoor applications where space is limited. This dimmable 1-7/8' light bar uses 5050 SMD RGB LEDs to emit colorful illumination. Use a compatible RGB controller for color selection and color-changing modes. The bar has a separate RGB power input and a common anode female socket. Easily join up to 10 fixtures with compatible interconnect cables (sold separately). Wire must run back to the power source every 10 meters to avoid voltage drop. The non-weatherproof light fixtures have 12 VDC operation and can be cut into 3-LED segments.
Applications
Accent Lighting
Backlighting
Cove Lighting
Display Cases
Off Grid Lighting
Trade Shows
Under-Cabinets
UL Listed
ISA Approved
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Specifications
Brightness
244 lm/ft (800 lm/m)
Certifications/Compliance
ISA Approved, UL Listed
Color/CCT
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin.
Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces.
Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight.
Natural and cool white are considered ideal for task lighting.
RGB
Current Draw
Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
400 mA
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
180°
LED Type
5050 SMD
LEDs per Segment
3
Light Length
23in (1.88ft)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density.
24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run.
If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.