Rigid LED Strip - Narrow PCB Light Bars with High Power 3-Chip LEDs

Name: Rigid LED Strip - Narrow PCB Light Bars with High Power 3-Chip LEDs
Brand: Super Bright LEDs
SKU: RLBN-x30X3SMD-x
Price: 14.99 USD
Availability: InStock
Rating: 4.7 (30 reviews)

Part Number

RLBN-x30X3SMD-x

Rating:
93% of 100

30 Reviews Add Your Review

Free Shipping

On all orders $300 and up only within the U.S.
Read More.

Item does not qualify

Add to Wish List

Skip to the end of the images gallery

6 photos

Skip to the beginning of the images gallery

Overview

Description

This 22.5" long narrow profile rigid LED light bar features a printed chipboard, 30 3-Chip 5050 SMD LEDs, and end-to-end connection using a C21 Interconnect and Power Jumpers making it an ideal alternative to building with components. The rigid LED strip can be cut into 1-LED segments and operates at 12 VDC.

Applications

Bookshelves
Cabinets
Cove Lighting
Off Grid Lighting
Showcases
Trade Shows
Under-Cabinets

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

Specifications

Certifications/Compliance	ISA Approved, UL Listed
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Non-weatherproof, Suitable for Dry Locations
Input Connection Type	RLBN
IP Rating	IP20
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Type	5050 SMD
LEDs per Segment	1
Length	23in (1.88ft)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	10
Operating Voltage	12 VDC
Power Consumption	7 Watts
Rated Life (L70)	30000 Hours
Series	RLBN
Strip Width	8.05mm (0.32in)

Print Specifications

Part NO	Brightness	CCT Value CCT Value	Color/CCT Color/CCT Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	Current Draw Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	Current Draw per Foot Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	Wattage per Foot
RLBN-B30X3SMD			Blue	550 mA	294mA	3.5 W/ft (11.6 W/m)
RLBN-CW30X3SMD	325 lm/ft	7800K	Cool 7800K	560 mA	299mA	3.6 Watts
RLBN-NW30X3SMD	342 lm/ft	4000K	Natural 4000K	520 mA	278mA	3.3 W/ft (11 W/m)
RLBN-R30X3SMD			Red	550 mA	294mA	3.5 W/ft (11.6 W/m)
RLBN-WW30X3SMD	308 lm/ft	3250K	Warm 3250K	550 mA	294mA	3.5 W/ft (11.6 W/m)

Accessories & Power Supplies

Reviews

93%

4.7 / 5 stars

30 reviews

Write Your Own Review

Write a Review

You're reviewing: Rigid LED Strip - Narrow PCB Light Bars with High Power 3-Chip LEDs

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs