Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
RGB LED Controller with RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel - RGB Controller with RF Remote

RGB LED Controller with RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel - RGB Controller with RF Remote

Part Number
LDRF-RGB4
In Stock
$19.99 / set
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
15 photos
Most Popular
  1. 18 Gauge Wire - Two Conductor Power Wire
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire
    $0.29 per Foot
  2. 22 Gauge Wire - Four Conductor RGB Power Wire,
    22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire
    $0.85 per Foot
Loading...

Overview

Universal Red/Green/Blue (RGB) controller and dimmer with handheld RF Remote can control any 12VDC RGB LED products. 8 individually selectable Dimmable Static Color Modes. 6 individually selectable Dynamic Color-Changing Modes with Speed, Brightness, Play/Pause and ON/OFF controls. Maximum load is 4 amps per channel, 12 amps total.
FCC
FCC
2 Years
2 Years
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Similar RGB LED Controllers with Remote Controls

  Control Type Channels Amps Per Channel Special Features Price  
LDIR-RGB3
Infrared (IR) Remote
3 Channels
3 Amps/CH
$14.99 ea.
LDRF-RGB-MZ
Handheld (RF) Remote
3 Channels
6 Amps/CH

From $17.99 ea.

To $37.98 ea.

LDRF-RGB6-TC4
Handheld (RF) Remote
3 Channels
6 Amps/CH
$29.99 ea.
LDRF-RGB8-TC3B
Handheld (RF) Remote
3 Channels
8 Amps/CH
$24.99 ea.
LDRF-RGBW6-MZ
Handheld (RF) Remote
4 Channels
6 Amps/CH

From $17.99 ea.

To $37.98 ea.

Specifications

Amps 12.00 Amps
Amps Per Channel 4 Amps/CH
Battery Type 1 x 27A
Channels 3 Channels
Control Type Handheld (RF) Remote
Input Connection Type Screw Terminals
Standards And Certifications FCC
Voltage 12-24 VDC
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies
12V Power Supplies
Most Popular
Connectors

Accessories Links

Accessory Category
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  3. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  4. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  5. LQC-x - Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  6. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  7. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  8. 22 Gauge Wire - Four Conductor RGB Power Wire,
    $0.85 per Foot
    22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4Wire
    In stock
    22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
  9. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  10. 22-18 AWG Perma-seal Butt Connectors
    $0.21 ea.
    22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218
    In stock
    Use this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  11. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  12. Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC

    $8.99 ea.
    Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. LQC-x - Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  3. 22-18 AWG Perma-seal Butt Connectors
    $0.21 ea.
    22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218
    In stock
    Use this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  4. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  5. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  1. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  2. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  3. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  4. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  5. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  6. Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC

    $8.99 ea.
    Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  7. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  8. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $49.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  9. Wall-Mounted Desktop Power Supply - 12V DC GST Series

    $13.99 ea.
    Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1J
    In stock
    Use the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and over-voltage and has a 5.5mm barrel connector output and standard 1-15P 120 VAC input. Available in 18 or 25-watt maximum output.
  10. Mean Well LED Switching Power Supply - RS Series 50W Enclosed LED Power Supply - 12V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - RS Series 50W Enclosed LED Power Supply - 12V DC Part Number: RS-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  11. Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC

    $53.99 ea.
    Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC Part Number: RSP-x-12
    In stock
    * Universal AC input / Full range
    * Built-in active PFC function, PF>0.93
    * Protections: Short circuit / Overload / Over voltage / Over temperature
    * Built-in constant current limiting circuit
    * Remote ON-OFF control(Optional)
    * LED indicator for power on
    * 100% full load burn-in test
    * Fixed switching frequency at PFC:67KHz PWM:134KHz
    * 3 years warranty
    * Made by Mean Well
  1. 18 Gauge Wire - Two Conductor Power Wire
    $0.29 per Foot
    18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
    In stock
    Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
  2. 22 Gauge Wire - Four Conductor RGB Power Wire,
    $0.85 per Foot
    22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4Wire
    In stock
    22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
  1. 6 Position Terminal Block replacement
    $0.69 ea.
    TB-6P 6 Position Terminal Block - 6 Position Part Number: TB-6P
    In stock
    6 position terminal block for controllers and amplifiers with V+ RGB and + - positions. Comes with required terminal blocks.

Reviews

5 / 5 stars
1 reviews

Write Your Own Review

Write a Review

You're reviewing: RGB LED Controller with RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel - RGB Controller with RF Remote

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.