CCPSD series Constant Current LED Driver - DiodeDrive® - TRIAC Dimmable - 25W - 700mA - 25-35 VDC - CCPSD-25W-700T

Name: CCPSD series Constant Current LED Driver - DiodeDrive® - TRIAC Dimmable - 25W - 700mA - 25-35 VDC - CCPSD-25W-700T
Brand: Super Bright LEDs
SKU: CCPSD-25W-700T
Price: 16.99 USD
Availability: OutOfStock
Rating: 5 (1 reviews)

Part Number

CCPSD-25W-700T

Features

Class 2 Constant Current
TRIAC dimmable
Fully isolated plastic body
Fanless design
25-watts | 700 mA output
3 year warranty

View more details

Skip to the end of the images gallery

3 photos

Skip to the beginning of the images gallery

Overview

CCPSD series Constant Current Driver from DiodeDrive is a reliable power solution for LED lighting systems. The TRIAC dimmable device is compatible with leading edge and trailing edge dimmers. High efficiency of 85% and fanless design allow this device to operate with in a wide temperature range. Compact, fully isolated plastic case is ideal for indoor applications. Can be used to replace an existing driver. Please check voltage and wattage of the previous driver to make sure this is a compatible replacement.

Product Details:

120 VAC input
18 AWG wires
TRIAC dimmable - works with leading edge and trailing edge (ELV) dimmers
Built in PFC function
Operating Temperature 32°–122° F (0°–50° C
85% efficiency
1kV surge protection
Built-in short-circuit, overload, and over-temperature protection
UL Recognized, FCC approved
3 year warranty

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Ambient Operating Temperature Range	0~+50 °C (32~+122 °F)
Certifications/Compliance	Class 2, FCC, UL Recognized
Dimmable	Yes
Dimming Control TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supplyâ€”dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	TRIAC
Environmental Rating	Non-weatherproof, Suitable for Damp Locations
Input Connection Type	Pigtail
Input Voltage	120 VAC
IP Rating .	IP30
Output Current	700 mA
Output Voltage	25–35 VDC
Surge Protection	1 kV

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

Powercord

Accessories Links

Accessory Category

Accessory Type:

$7.99 ea.

Power Cord for Power Supplies - Power Cord for Power Supplies Part Number: _POWERCORD
In stock

Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.

Reviews

100%

5 / 5 stars

1 reviews

Write Your Own Review

Write a Review

You're reviewing: CCPSD series Constant Current LED Driver - DiodeDrive® - TRIAC Dimmable - 25W - 700mA - 25-35 VDC - CCPSD-25W-700T

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs