Low-Voltage Transformers

Power outdoor LED systems with our selection of low-voltage transformers. Our product line includes a range of capacity, with solutions for powering your path lights, flood lights, architectural accents, and more. With options like photocell, digital timers, and multi-tap features, lights can operate seamlessly to your exact specifications. The specialty G-LUX transformer completes its series as an entire plug-and-play landscape lighting system.

8 Results

per page
Sort By
Set Ascending Direction
View as List Grid
  1. 1
    120W Low-Voltage Landscape Lighting Transformer - DiodeDrive® Series- Integrated Photocell and Timer - LVT-120W-12VAC

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12 VAC
    Photocell
    Integrated (Non-bypassable)
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $45.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    3 Years
    3 Years
  2. 2
    200W Low-Voltage Landscape Lighting Transformer - DiodeDrive® Series - Integrated Photocell and Timer - LVT-200W-12VAC

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12 VAC
    Photocell
    Integrated (Non-bypassable)
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $69.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    3 Years
    3 Years
  3. 3
    150W Low Voltage Stainless Steel Transformer - Multi-Tap 12V / 13V / 14V / 15V Output

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12/13/14/15 VAC
    Photocell
    Optional
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $189.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    5 Years
    5 Years
  4. 4
    50W Low Voltage LED Landscape Transformer with Astronomical Dusk To Dawn Timer - 12 VAC Output

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12 VAC
    Photocell
    Integrated (Non-bypassable)
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    Your Price $44.99 ea. Regular Price $49.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    3 Years
    3 Years
  5. 5
    60W Low-Voltage Landscape Lighting Transformer - DiodeDrive Series® - Integrated Photocell and Timer - LVT-60W-12VAC

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12 VAC
    Photocell
    Integrated (Non-bypassable)
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $32.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    3 Years
    3 Years
  6. 6
    G-LUX 12 VAC Power Supply - Plug and Play

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12 VAC
    Photocell
    Optional
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock

    Starting at$9.99 ea.
    View More Info
    UL Listed
    UL Listed
    2 Years
    2 Years
  7. 7
    75W Low Voltage Stainless Steel Transformer With Timer - Multi-Tap 12V / 15V Output

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12/15 VAC
    Photocell
    Optional
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $139.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    5 Years
    5 Years
  8. 8
    300W Low Voltage Stainless Steel Transformer - Multi-Tap 12V / 13V / 14V / 15V Output

    ShowHide specs
    Input Voltage
    120 VAC
    Output Voltage
    12/13/14/15 VAC
    Photocell
    Optional
    When an LED light uses a photocell, the light will turn on and off automatically based on the presence or absence of light. Some lights allow for photocells to be bypassed. When the photocell is being bypassed, it allows for the light fixture to remain on constantly or be controlled by a switch. Rather than it being controlled automatically. Common ways to bypass a photocell are by using a shorting cap, a slide/DIP switch, or disconnecting the wiring that connects the light and the photocell.

    Shorting Cap: Some photocells are mounted externally with a plug-on controller. Swapping this for a shorting cap replaces the photocontrol sensor on your LED light fixture, which keeps your light in a constant-on state.

    DIP Switch: a DIP switch that is integrated into an LED light fixture or photocell allows you to toggle the photocontrol sensor on or off to fit your needs by putting your light fixture either into a constant-on state or letting it control itself automatically.

    Disconnect the wiring: disconnecting the wires from a photocell and an LED light cuts off any communication between those two devices. To disconnect the wiring, consulting the user manual of the product will be necessary, as not every wire disconnection method is the same.
    Water Resistance
    Waterproof
    In Stock
    $229.99 ea.
    View More Info
    ETL Listed
    ETL Listed
    5 Years
    5 Years

8 Results

per page
Sort By
Set Ascending Direction
View as List Grid
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.