Slim Profile Emergency Backup Driver and Battery - 7W - 30–60 VDC Output

Slim Profile Emergency Backup Driver and Battery - 7W - 30-60 VDC Output - BLD-YT08D-XXX

Part Number
BLD-YT08D-XXX

Features

  • Slim design suitable for troffer and light panel installation
  • At least 90 minute operation in emergency mode
  • Li-ion battery - full recharge in 48 hours after complete discharge
  • Wide range input voltage - 100–347 VAC
  • 30–60 VDC output
  • 7W max output, 133–260 mA output (relative to 30–60 VDC voltage)
  • Low-profile adhesive test button
  • UL924 Listed and meets CEC Title 20 standards
  • 5 year warranty
View more details
In Stock
$89.99 ea.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

The BLD-YT08D-XXX emergency LED driver and battery works with LED drivers in commercial luminaires to keep them powered during emergency outages. When AC supply power is lost in the event of a power outage, the emergency driver switches on automatically to provide backup battery power directly to LED arrays at a rated output voltage of 30–60 VDC. The superior Li-ion battery provides backup light for a minimum of 90 minutes, with 10 times the shelf life of a traditional lead acid battery. The emergency battery and driver assembly are UL924 Listed and allow for both field and factory installations on suitable LED luminaires. The slim design of this kit is ideal for installation in tight spaces such as on troffers and light panels in recessed ceilings as well to accommodate a wider variety of installation types than more traditional emergency backup drivers/batteries with out sacrificing performance.
Product Details:
  • Slim design allows installation in tighter spaces, ideal for troffers and light panels
  • Housing constructed of durable galvanized steel
  • Soft switching to prevent voltage spikes and increase longevity of the LED modules
  • Operating temperature range of 32°–122° F
  • Wide range input voltage - 100–347 VAC
  • 30–60 VDC output
  • 7 W max output, 133–260 mA output (relative to 30–60 VDC voltage)
  • Rated IP20, suitable for damp locations
  • Open/Short/Over-Voltage/Over Temperature protection
  • UL924 Listed and meets CEC Title 20 standards
  • 5 year warranty
UL Listed
UL Listed
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Emergency Lighting
  • Linear Strip Fixtures
  • Panel Lights
  • Suspended Grid Ceilings
  • Troffer Fixtures
  • Commercial Downlights
  • Commercial Lighting

Specifications

Battery Type Li-ion
Environmental Rating Non-weatherproof, Suitable for Damp Locations
Input Connection Type Pigtail
IP Rating IP20
Material Steel Housing
Operating Temperature 0~+50 °C (32~+122 °F)
Output Voltage 30-60 VDC
Standards And Certifications UL Listed
UL File Number E493915
Print Specifications

Accessories & Power Supplies

  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.

Reviews

Write Your Own Review

Write a Review

You're reviewing: Slim Profile Emergency Backup Driver and Battery - 7W - 30-60 VDC Output - BLD-YT08D-XXX

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs