Hatch High Efficiency LED Emergency Driver - 20W - 120-277 VAC
Part Number:
ELP20-2455-UNV-1C
Manufacturer Part Number:
$99.99
ea.
Was
In Stock
Features
- Compatible with unswitched and switched fixtures
- Provides 90 minutes of emergency operation after a 24-hour charge
- Includes test switch with integrated charge indicator
- Protections against over-voltage, short circuit, and over-current
Overview
The high-efficiency performance of the Hatch LED Emergency Driver meets California Energy Commission (CEC) Title 20 efficiency requirements and is certified in the CA Title 20 Appliance Efficiency Database. The driver allows an LED lighting fixture to be used for normal and emergency operations. In the event of a power failure, it switches to emergency mode and operates the existing fixture for at least 90 minutes. All LED emergency drivers include a test switch with an integrated charge indicator.
Product Details:
- Durable metal housing
- Suitable for dry locations
- LiFePO4 battery
- 120-277 VAC
- UL Listed
- 5-year warranty
Package Includes:
- 1 - LED Emergency Driver
- 2 - Tek Screws
- 1 - Wall Plate
- 1 - Test Button
- 1 - Luminaire Mod. Label
- 1 - Installation Guide
- 3 - Twist-on Wire Connectors
- 2 - Wall Plate Screws
Documents
ELP Emergency LED Driver Installation Guide 
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Class 2
Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
This product meets California Energy Commission (CEC) Title 20 requirements and is registered in their Modernized Appliance Efficiency Database System (MAEDbS).
CEC California Title 20 mandates that consumer products sold in the state meet specified energy efficiency standards, aiming to reduce energy consumption and promote environmental sustainability. Manufacturers must ensure their products consume less energy while maintaining or improving performance compared to less efficient models to comply with these regulations.
- CRI 82 or higher
- Compliance score 297 or higher
- Minimum L/W 45 (GSL) or 80 (SLED, SSDL)
- Power factor greater than 0.7
- Hour rated life greater than 10,000 hours (25,000 for MR16s)
- ENERGY STAR® V2.0 omnidirectional light distribution for A-bulbs
- ENERGY STAR V1.1 light distribution for decorative bulb shapes
- Dimmable bulbs: Dimmable to 10%, reduce flicker, noise less than 24 dB at 100% and 20%
Specifications
| Ambient Operating Temperature Range | 0 to 55 °C (32 to 131 °F) |
|---|---|
| Battery Type | LiFePO4 |
| Brand | Hatch Lighting |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies. |
CEC Title 20 Compliant, Class 2, FCC, UL Listed |
| Dimmable | No |
| Emergency Operation Time | 90+ Minutes |
|
Environmental Rating
Environmental Rating
|
Suitable for Dry Loactions |
| Input Connection Type | Pigtail |
| Input Voltage | 120-277 VAC |
| Output Connection Type | Pigtail |
| Output Current | 833mA @ 24 VDC, 363mA @ 55 VDC |
|
Output Power
Output Power
A power supply's power consumption is measured in watts and refers to the maximum amount of power it is capable of delivering. For best results, choose a power supply that offers a minimum of 20% wattage overhead for your application. Wattage overhead ensures that your project will function correctly, extends the life of the power supply, and offers greater design flexibility by allowing for project expansion. |
20 Watts |
| Output Voltage | 24-55 VDC |
| Recharge Time | 24 Hours |
| Warranty | 5 Year |
| Wire Gauge | 18 AWG, 22 AWG |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
