Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 24V DC
Features
- Class 2 Power Supply
- Convection Cooled Operation
- Short Circuit Protection
- Constant Voltage Mode
- Fully Isolated Plastic Case
- Dust Proof IP30
Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.
Class II power supplies must follow the International Electrotechnical Commission IEC 61439-1 design. This code details that Class II power supplies must have two layers of insulation between the user and the internal current-carrying components to protect the user from electrical shock. The initial layer is "basic" insulation. The second double layer is a reinforcement layer that eliminates the need for a protective earth connection (earthing) or a ground connection since the power supply is grounded within the product's casing.
Part NO | Output Current | Output Power Output Power |
---|---|---|
APV-12-24 | 500mA | 12 Watts |
APV-12-24(POWERCORD) | 500mA | 12 Watts |
APV-16-24 | 670 mA | 16 Watts |
APV-16-24(POWERCORD) | 670 mA | 16 Watts |
APV-25-24 | 1050mA | 25 Watts |
APV-25-24(POWERCORD) | 1050mA | 25 Watts |
APV-35-24 | 1500mA | 35 Watts |
APV-35-24(POWERCORD) | 1500mA | 35 Watts |
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.