MRGB-A4 Mini RGB Amplifier - Mini RGB LED Amplifier
Part Number
MRGB-A4
Overview
MRGB-A4 series three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Used to increase the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. 12VDC operation. 2 x 4-pin RGB pigtail connectors included.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Conductors | 4 |
|---|---|
| Input Connection Type | Pigtail |
| Output Connection Type | Pigtail |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$23.99 ea.Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
View all
All Accessories1 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$23.99 ea.Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockA low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well. -
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload. -
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. -
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload. -
$99.99 ea.Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC Part Number: KVP-12120-TDLIn stockThis enclosed dimmable LED driver/power supply has a maximum load of 120 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The sealed driver allows for indoor or outdoor use. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and over-voltage and has a 5.5mm barrel connector output and standard 1-15P 120 VAC input. Available in 18 or 25-watt maximum output. -
View all
12V Power Supplies18 additional compatible accessories
Reviews
0 / 5 stars
0 reviews
0 / 5 stars
0 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*