Wireless RGBW Touch LED Dimmer Switch for EZ Dimmer Controller - EZD-RGBW3-WM
Part Number
EZD-RGBW3-WM
Customers Also Viewed
Overview
Designed for use with the Wireless LED 4-Channel EZ Dimmer Receiver and as a DMX controller, this wireless RGBW LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer switch has a color-selection wheel for thousands of color options, 10 dynamic color-changing/single color modes, 0-100% dimming, on/off controls, and 4 color-specific channel controls for red, green, blue, and white. The dimmer transmits an RF signal to the wireless receiver from up to 300' away in open air. The wireless dimmer includes 2 mounting screws.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Similar RGB LED Dimmer Switches
| Channels | Control Type | Special Features | Volts | Price | ||
|
3 Channels
|
In-line Wired
|
|
12 VDC
|
$19.99
ea.
|
|
|
3 Channels
|
Handheld (RF) Remote
|
|
3 VDC
|
$39.99
ea.
|
|
|
|
Handheld (RF) Remote
|
Remote Control
|
4.5 VDC
|
$69.99
ea.
|
|
Specifications
| Channels | 3 Channels |
|---|---|
| Control Type | Handheld (RF) Remote |
| Radio Frequency | 868 MHz |
| Remote Range | Up to 98.4 ft (30 m) |
| Standards And Certifications | CE, FCC |
| Voltage | 12-24 VDC |
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$59.99 ea.Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8AIn stockDesigned for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$18.99 ea.LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX3-4CH-4AIn stockThe DMX512 decoder can control up to 4 different constant voltage LED products or any one RGBW light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 input/output interface. Connect up to 4 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. -
$45.99 ea.4 Channel LED DMX512 Decoder - 5A/CH - 12-24V - Digital Display - 60-120W - DS-DMX45 Part Number: DS-DMX45In stockDS series 4 Channel DMX Decoder allows up to 4 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. It has a total of 4 channels, and it allows a max of 5A and 120W per channel. The stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
-
$75.99 ea.LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45 Part Number: DS-WDMX45In stockDS series DMX512 Decoder allows LED lights to be connected to and controlled with DMX systems. with a fully waterproof case, the device can be used both indoor or outdoor with out the need for a protective enclosure. Digital display with simple buttons make it easy to control LEDs like strip lights or landscape fixtures. Select modes and assign addresses for up to 4 channels, 5 amps per channel, with a maximum power of 60-watts at 12 VDC or 180-watts at 36 VDC. -
$574.99 ea.SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10In stockEasily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi. -
$299.99 ea.SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and USB Power Cord Included Part Number: SLESA-U9In stockEasily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The standalone mode controls up to 256 DMX channels and live mode controls up to 512 channels. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. Standalone function has 20 kb of memory. A USB power cable and programming software are included.
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$59.99 ea.Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8AIn stock
Designed for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
-
$18.99 ea.LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX3-4CH-4AIn stockThe DMX512 decoder can control up to 4 different constant voltage LED products or any one RGBW light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 input/output interface. Connect up to 4 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC.
-
$45.99 ea.4 Channel LED DMX512 Decoder - 5A/CH - 12-24V - Digital Display - 60-120W - DS-DMX45 Part Number: DS-DMX45In stock
DS series 4 Channel DMX Decoder allows up to 4 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. It has a total of 4 channels, and it allows a max of 5A and 120W per channel. The stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
-
$75.99 ea.LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45 Part Number: DS-WDMX45In stockDS series DMX512 Decoder allows LED lights to be connected to and controlled with DMX systems. with a fully waterproof case, the device can be used both indoor or outdoor with out the need for a protective enclosure. Digital display with simple buttons make it easy to control LEDs like strip lights or landscape fixtures. Select modes and assign addresses for up to 4 channels, 5 amps per channel, with a maximum power of 60-watts at 12 VDC or 180-watts at 36 VDC.
-
$574.99 ea.SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10In stockEasily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi.
-
$299.99 ea.SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and USB Power Cord Included Part Number: SLESA-U9In stock
Easily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The standalone mode controls up to 256 DMX channels and live mode controls up to 512 channels. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. Standalone function has 20 kb of memory. A USB power cable and programming software are included.
Reviews
3 / 5 stars
2 reviews
3 / 5 stars
2 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*