Name: DMX512 SPI Decoder - Digital RGB Addressable LED Decoder/Controller - 5-24 VDC - DS-DMX23
Brand: Super Bright LEDs
SKU: DS-DMX23
Price: 99.99 USD
Availability: InStock

Overview

DMX23 series DMX512 Decoder converts DMX signals to an SPI digital signal for controlling digital LED lights. Compatible with several IC chip types (see complete list below), this interface will run anywhere from 5-24 VDC and control up to 900 pixels, making it possible to individually control digital pixel lights, DreamColor LED strip lights, and other modules with compatible IC chip types. Choose from among 32 dynamic color-chasing patterns and adjust brightness and speed with the user-friendly digital display and arrow buttons. Or, pair with optional remote control (sold separately) for wireless control from a distance of nearly 100ft.

Compatible IC Types: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811,WS2812, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B, SK6812, UCS8904B, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A

Product Details:

3-pin XLR, RJ45 and screw terminal DMX signal IN and OUT
Connection type: CLK, DATA
Integrated mounting tabs
Standard DMX512 compliant interface: set DMX decode start address with buttons and digital display
Under stand-alone mode: change mode, speed or brightness with buttons and digital display
Under RF mode, use compatible RF 2.4G remote control
Operating temperature: -22°–131° F (-30°–55° C)
Rated IP20 - suitable for damp locations
CE, FCC

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

DMX In/Out	RJ45 (x2), Screw Terminals, XLR3 (one male, one female)
IP Rating .	IP20
Max Output Current	10 A
Operating Temperature	-30~+55 °C (-22~+131 °F)
Output Voltage	Matches Input
Remote Range	Up to 98.4 ft (30 m)
Standards And Certifications	CE, FCC

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

DMX Adapters

DMX Terminators

DMX Cables

DMX Connectors

24V Power Supplies

Wiring

5V Power Supplies

12V Power Supplies

Controllers

Accessories Links

Accessory Category

Accessory Type:

$3.99 ea.

DMX Terminator for XLR3 - Single Part Number: DMX3T
In stock

The DMX terminator plugs into any XLR 3-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.
$6.99 ea.

DMX Terminator for XLR5 - Single Part Number: DMX5T
In stock

The DMX terminator plugs into any XLR 5-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.

$5.99 ea.

DMX 5-Pin Male XLR5 Cable Connector Part Number: DMX5M
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin male XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Female XLR5 Cable Connector Part Number: DMX5F
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin female XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Male XLR3 Cable Connector Part Number: DMX3M
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin male XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Female XLR3 Cable Connector Part Number: DMX3F
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin female XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.

$7.99 ea.

CPS series AC Power Adapter - DiodeDrive® - 5 VDC Switching Power Supply Part Number: CPS-5V-xW
In stock

CPS series Power Adaptor from DiodeDrive provides power for 5 VDC systems, such as compatible LED strip lights. The reliable Class II device has a fully enclosed plastic case and integrated short circuit and overload protection. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. Available in 3 wattage options.
$20.99 ea.

Wall-Mounted AC Adapter - 5 VDC Power Supply - 21W - GST36U05-P1J Part Number: GST36U05-P1J
In stock

21-watt Wall-Mounted Adapter from Mean Well is a highly reliable Class II power unit. Universal AC input and 5 VDC output for low voltage application, such as 5V LED strip lights. Efficient design allows the adapter to save energy when it is either under operating mode or in standby mode. Fully enclosed plastic case provides long-lasting durability.

$19.99 ea.

Digital RGB LED Controller with RF Wireless Remote - SPI Controller - 5-24 VDC Part Number: DS-SC-x
In stock

DS series Digital LED Controller with Remote is a compact, powerful controller unit for color-chasing LED lights. Compatible with several IC chip types (see complete list below), this interface will run on anywhere from 5-24 VDC and control up to 1024 pixels. Pair this controller with the required wireless remote to navigate the 32 preset modes as well as adjust brightness, chase speed, and more. Simply connect this unit to compatible LED strip lights and a power supply to create vibrant color-chasing effects from the convenience of the remote control.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: DMX512 SPI Decoder - Digital RGB Addressable LED Decoder/Controller - 5-24 VDC - DS-DMX23

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

DMX512 SPI Decoder - Digital RGB Addressable LED Decoder/Controller - 5-24 VDC - DS-DMX23

Features

Product Photos

Overview

Specifications