Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar

Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar

Part Number
RLBN-RGB30SMD
Out of Stock, Expected 06/11/23
Backorder Available
$14.99 ea.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Overview

Rigid linear RGB LED light bars are an extremely versatile solution for a variety of lighting needs, such as cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, or other indoor applications where space is limited. This dimmable 1-7/8' light bar uses 5050 SMD RGB LEDs to emit colorful illumination. Use a compatible RGB controller for color selection and color-changing modes. The bar has a separate RGB power input and a common anode female socket. Easily join up to 10 fixtures with compatible interconnect cables (sold separately). Wire must run back to the power source every 10 meters to avoid voltage drop. The non-weatherproof light fixtures have 12 VDC operation and can be cut into 3-LED segments.
UL Listed
UL Listed
ISA Approved
ISA Approved
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • LED Backlights
  • Accent Lighting
  • Off Grid Lighting
  • Coves
  • Under-Cabinets
  • Display Cases
  • Trade Shows

Specifications

Brightness 244 lm/ft (800 lm/m)
Certifications/Compliance ISA Approved, UL Listed
Color Temperature RGB
Current Draw 400 mA
Current Draw per Foot 247mA
Dimmable Yes
Environmental Rating Non-weatherproof, Suitable for Dry Locations
IP Rating IP20
LED Beam Angle 180°
LED Type 5050 SMD
LEDs per Segment 3
Length 23in (1.88ft)
Max Run (Class 2) 10
Operating Voltage 12 VDC
Power Consumption 5 Watts
Rated Life (L70) 40000 Hours
Strip Width 8mm (0.31in)
Wattage per Foot 3 Watts
Print Specifications

Accessories & Power Supplies

  1. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  3. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  4. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver.
  5. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  6. Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W

    $124.99 ea.
    Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W Part Number: DI-12V-SE-x
    In stock
    The SWITCHEX® LED Driver and Dimmer Switch by Diode LED® combines an in-wall dimmer switch with a power supply, simplifying installation and eliminating issues with incompatible drivers and switches. The integrated unit installs into standard recessed switch boxes and converts standard 120V AC power into low-voltage 12V DC, controlling various low-voltage LED strip lights and fixtures. Control the dimming capabilities using the slider, adjusting between 100% - 5%. The SWITCHEX® includes three interchangeable face plates in glossy white, glossy light almond, and glossy brown to match the existing switches (trim plate not included).
  7. MICRO-ALU LED strip channel - surface / flush mount - 11mm

    $9.99 ea.
    MICRO-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1888
    In stock
    The KLUS® MICRO-ALU Aluminum channel offers a professional mounting solution for surface mounting LED strip lights up to 11mm wide. The low-profile aluminum extrusion is 6mm deep and can reach a waterproof rating when sealed with optional accessories. Use a clear lens for optimal brightness or a frosted lens for smooth lighting with less visible hot spots. Available in 3.3ft (1m) and 6.6ft (2m) lengths, silver, black, or white anodized or non-anodized silver.
  8. View all

    All Accessories

    53 additional compatible accessories

  1. Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W

    $124.99 ea.
    Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W Part Number: DI-12V-SE-x
    In stock
    The SWITCHEX® LED Driver and Dimmer Switch by Diode LED® combines an in-wall dimmer switch with a power supply, simplifying installation and eliminating issues with incompatible drivers and switches. The integrated unit installs into standard recessed switch boxes and converts standard 120V AC power into low-voltage 12V DC, controlling various low-voltage LED strip lights and fixtures. Control the dimming capabilities using the slider, adjusting between 100% - 5%. The SWITCHEX® includes three interchangeable face plates in glossy white, glossy light almond, and glossy brown to match the existing switches (trim plate not included).
  2. MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel

    $37.90 ea.

    MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel - RGB Controller (Receiver) (Remote) Part Number: LDRF-RGB-MZ
    In stock
    Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.
  3. View all

    Controllers

    20 additional compatible accessories

  1. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  2. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  3. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  4. Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W

    $124.99 ea.
    Diode LED® - SWITCHEX® LED Driver and Dimmer Switch - 12V - 40W / 60W Part Number: DI-12V-SE-x
    In stock
    The SWITCHEX® LED Driver and Dimmer Switch by Diode LED® combines an in-wall dimmer switch with a power supply, simplifying installation and eliminating issues with incompatible drivers and switches. The integrated unit installs into standard recessed switch boxes and converts standard 120V AC power into low-voltage 12V DC, controlling various low-voltage LED strip lights and fixtures. Control the dimming capabilities using the slider, adjusting between 100% - 5%. The SWITCHEX® includes three interchangeable face plates in glossy white, glossy light almond, and glossy brown to match the existing switches (trim plate not included).
  5. Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC

    $8.99 ea.
    Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12
    In stock

    The Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it has a constant current limiting circuit, full load burn-in, and fixed switching frequency. It can withstand a universal AC input range of 100-240VAC, and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.

  6. View all

    12V Power Supplies

    17 additional compatible accessories

  1. Adjustable KLUS REGULOR aluminum channel

    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - 1m / 2m Part Number: B468+43ANODA
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double-sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. Available in lengths of 3.3ft (1m) or 6.6ft (2m).
  2. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver.
  3. MICRO-ALU LED strip channel - surface / flush mount - 11mm

    $9.99 ea.
    MICRO-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1888
    In stock
    The KLUS® MICRO-ALU Aluminum channel offers a professional mounting solution for surface mounting LED strip lights up to 11mm wide. The low-profile aluminum extrusion is 6mm deep and can reach a waterproof rating when sealed with optional accessories. Use a clear lens for optimal brightness or a frosted lens for smooth lighting with less visible hot spots. Available in 3.3ft (1m) and 6.6ft (2m) lengths, silver, black, or white anodized or non-anodized silver.
  4. KLUS 45-ALU LED strip channels in silver, white, and black with optional lenses

    $18.99 ea.
    45-ALU Aluminum Channel - Corner - For Strips Up To 11mm - 1m / 2m Part Number: B4023ANODA
    In stock
    The KLUS® 45-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 11mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or a frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Install with 3M-FTS double-sided tape or mounting brackets. Seal the channel with optional accessories to reach a waterproof rating for wet areas. This channel is perfect under desks and stair nosings or for bookshelves, cabinets, workbenches, and more. Available in lengths of 3.3ft (1m) or 6.6ft (2m) in black, silver, or white.

Reviews

5 / 5 stars
2 reviews

Write Your Own Review

Write a Review

You're reviewing: Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.